From: Chao Gao <chao.gao@intel.com>
To: Yang Weijiang <weijiang.yang@intel.com>
Cc: <seanjc@google.com>, <pbonzini@redhat.com>,
<peterz@infradead.org>, <john.allen@amd.com>,
<kvm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<rick.p.edgecombe@intel.com>, <binbin.wu@linux.intel.com>
Subject: Re: [PATCH v5 09/19] KVM:x86: Make guest supervisor states as non-XSAVE managed
Date: Thu, 3 Aug 2023 19:15:03 +0800 [thread overview]
Message-ID: <ZMuMN/8Qa1sjJR/n@chao-email> (raw)
In-Reply-To: <20230803042732.88515-10-weijiang.yang@intel.com>
On Thu, Aug 03, 2023 at 12:27:22AM -0400, Yang Weijiang wrote:
>+void save_cet_supervisor_ssp(struct kvm_vcpu *vcpu)
>+{
>+ if (unlikely(guest_can_use(vcpu, X86_FEATURE_SHSTK))) {
>+ rdmsrl(MSR_IA32_PL0_SSP, vcpu->arch.cet_s_ssp[0]);
>+ rdmsrl(MSR_IA32_PL1_SSP, vcpu->arch.cet_s_ssp[1]);
>+ rdmsrl(MSR_IA32_PL2_SSP, vcpu->arch.cet_s_ssp[2]);
>+ /*
>+ * Omit reset to host PL{1,2}_SSP because Linux will never use
>+ * these MSRs.
>+ */
>+ wrmsrl(MSR_IA32_PL0_SSP, 0);
This wrmsrl() can be dropped because host doesn't support SSS yet.
>+ }
>+}
>+EXPORT_SYMBOL_GPL(save_cet_supervisor_ssp);
>+
>+void reload_cet_supervisor_ssp(struct kvm_vcpu *vcpu)
>+{
>+ if (unlikely(guest_can_use(vcpu, X86_FEATURE_SHSTK))) {
ditto
>+ wrmsrl(MSR_IA32_PL0_SSP, vcpu->arch.cet_s_ssp[0]);
>+ wrmsrl(MSR_IA32_PL1_SSP, vcpu->arch.cet_s_ssp[1]);
>+ wrmsrl(MSR_IA32_PL2_SSP, vcpu->arch.cet_s_ssp[2]);
>+ }
>+}
>+EXPORT_SYMBOL_GPL(reload_cet_supervisor_ssp);
>+
> int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
> {
> struct kvm_queued_exception *ex = &vcpu->arch.exception;
>@@ -12133,6 +12158,7 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
>
> vcpu->arch.cr3 = 0;
> kvm_register_mark_dirty(vcpu, VCPU_EXREG_CR3);
>+ memset(vcpu->arch.cet_s_ssp, 0, sizeof(vcpu->arch.cet_s_ssp));
>
> /*
> * CR0.CD/NW are set on RESET, preserved on INIT. Note, some versions
>@@ -12313,6 +12339,7 @@ void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu)
> pmu->need_cleanup = true;
> kvm_make_request(KVM_REQ_PMU, vcpu);
> }
>+
remove the stray newline.
> static_call(kvm_x86_sched_in)(vcpu, cpu);
> }
>
>diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
>index 6e6292915f8c..c69fc027f5ec 100644
>--- a/arch/x86/kvm/x86.h
>+++ b/arch/x86/kvm/x86.h
>@@ -501,6 +501,9 @@ static inline void kvm_machine_check(void)
>
> void kvm_load_guest_xsave_state(struct kvm_vcpu *vcpu);
> void kvm_load_host_xsave_state(struct kvm_vcpu *vcpu);
>+void save_cet_supervisor_ssp(struct kvm_vcpu *vcpu);
>+void reload_cet_supervisor_ssp(struct kvm_vcpu *vcpu);
nit: please add kvm_ prefix to the function names because they are exposed to
other modules. "cet" in the names is a little redundant. I slightly prefer
kvm_save/load_guest_supervisor_ssp()
Overall, this patch looks good to me. Hence,
Reviewed-by: Chao Gao <chao.gao@intel.com>
>+
> int kvm_spec_ctrl_test_value(u64 value);
> bool __kvm_is_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
> int kvm_handle_memory_failure(struct kvm_vcpu *vcpu, int r,
>--
>2.27.0
>
next prev parent reply other threads:[~2023-08-03 11:21 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-03 4:27 [PATCH v5 00/19] Enable CET Virtualization Yang Weijiang
2023-08-03 4:27 ` [PATCH v5 01/19] x86/cpufeatures: Add CPU feature flags for shadow stacks Yang Weijiang
2023-08-03 4:27 ` [PATCH v5 02/19] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states Yang Weijiang
2023-08-03 4:27 ` [PATCH v5 03/19] KVM:x86: Report XSS as to-be-saved if there are supported features Yang Weijiang
2023-08-03 4:27 ` [PATCH v5 04/19] KVM:x86: Refresh CPUID on write to guest MSR_IA32_XSS Yang Weijiang
2023-08-04 16:02 ` Sean Christopherson
2023-08-04 21:43 ` Paolo Bonzini
2023-08-09 3:11 ` Yang, Weijiang
2023-08-08 14:20 ` Yang, Weijiang
2023-08-04 18:27 ` Sean Christopherson
2023-08-07 6:55 ` Paolo Bonzini
2023-08-09 8:56 ` Yang, Weijiang
2023-08-10 0:01 ` Paolo Bonzini
2023-08-10 1:12 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 05/19] KVM:x86: Initialize kvm_caps.supported_xss Yang Weijiang
2023-08-04 18:45 ` Sean Christopherson
2023-08-08 15:08 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 06/19] KVM:x86: Load guest FPU state when access XSAVE-managed MSRs Yang Weijiang
2023-08-03 4:27 ` [PATCH v5 07/19] KVM:x86: Add fault checks for guest CR4.CET setting Yang Weijiang
2023-08-03 9:07 ` Chao Gao
2023-08-03 4:27 ` [PATCH v5 08/19] KVM:x86: Report KVM supported CET MSRs as to-be-saved Yang Weijiang
2023-08-03 10:39 ` Chao Gao
2023-08-04 3:13 ` Yang, Weijiang
2023-08-04 5:51 ` Chao Gao
2023-08-04 18:51 ` Sean Christopherson
2023-08-04 22:01 ` Paolo Bonzini
2023-08-08 15:16 ` Yang, Weijiang
2023-08-06 8:54 ` Yang, Weijiang
2023-08-04 18:55 ` Sean Christopherson
2023-08-08 15:26 ` Yang, Weijiang
2023-08-04 21:47 ` Paolo Bonzini
2023-08-09 3:14 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 09/19] KVM:x86: Make guest supervisor states as non-XSAVE managed Yang Weijiang
2023-08-03 11:15 ` Chao Gao [this message]
2023-08-04 3:26 ` Yang, Weijiang
2023-08-04 20:45 ` Sean Christopherson
2023-08-04 20:59 ` Peter Zijlstra
2023-08-04 21:32 ` Paolo Bonzini
2023-08-09 2:51 ` Yang, Weijiang
2023-08-09 2:39 ` Yang, Weijiang
2023-08-10 9:29 ` Yang, Weijiang
2023-08-10 14:29 ` Dave Hansen
2023-08-10 15:15 ` Paolo Bonzini
2023-08-10 15:37 ` Sean Christopherson
2023-08-11 3:03 ` Yang, Weijiang
2023-08-28 21:00 ` Dave Hansen
2023-08-29 7:05 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 10/19] KVM:VMX: Introduce CET VMCS fields and control bits Yang Weijiang
2023-08-03 4:27 ` [PATCH v5 11/19] KVM:VMX: Emulate read and write to CET MSRs Yang Weijiang
2023-08-04 5:14 ` Chao Gao
2023-08-04 21:27 ` Sean Christopherson
2023-08-04 21:45 ` Paolo Bonzini
2023-08-04 22:21 ` Sean Christopherson
2023-08-07 7:03 ` Paolo Bonzini
2023-08-06 8:44 ` Yang, Weijiang
2023-08-07 7:00 ` Paolo Bonzini
2023-08-04 8:28 ` Chao Gao
2023-08-09 7:12 ` Yang, Weijiang
2023-08-04 21:40 ` Paolo Bonzini
2023-08-09 3:05 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 12/19] KVM:x86: Save and reload SSP to/from SMRAM Yang Weijiang
2023-08-04 7:53 ` Chao Gao
2023-08-04 15:25 ` Sean Christopherson
2023-08-06 9:14 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 13/19] KVM:VMX: Set up interception for CET MSRs Yang Weijiang
2023-08-04 8:16 ` Chao Gao
2023-08-06 9:22 ` Yang, Weijiang
2023-08-07 1:16 ` Chao Gao
2023-08-09 6:11 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 14/19] KVM:VMX: Set host constant supervisor states to VMCS fields Yang Weijiang
2023-08-04 8:23 ` Chao Gao
2023-08-03 4:27 ` [PATCH v5 15/19] KVM:x86: Optimize CET supervisor SSP save/reload Yang Weijiang
2023-08-04 8:43 ` Chao Gao
2023-08-09 9:00 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 16/19] KVM:x86: Enable CET virtualization for VMX and advertise to userspace Yang Weijiang
2023-08-03 4:27 ` [PATCH v5 17/19] KVM:x86: Enable guest CET supervisor xstate bit support Yang Weijiang
2023-08-04 22:02 ` Paolo Bonzini
2023-08-09 6:07 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 18/19] KVM:nVMX: Refine error code injection to nested VM Yang Weijiang
2023-08-04 21:38 ` Sean Christopherson
2023-08-09 3:00 ` Yang, Weijiang
2023-08-03 4:27 ` [PATCH v5 19/19] KVM:nVMX: Enable CET support for " Yang Weijiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZMuMN/8Qa1sjJR/n@chao-email \
--to=chao.gao@intel.com \
--cc=binbin.wu@linux.intel.com \
--cc=john.allen@amd.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=rick.p.edgecombe@intel.com \
--cc=seanjc@google.com \
--cc=weijiang.yang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox