From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Cosmin Tanislav <demonsingur@gmail.com>,
Arnd Bergmann <arnd@arndb.de>,
ChiYuan Huang <cy_huang@richtek.com>,
Haibo Chen <haibo.chen@nxp.com>,
Ramona Bolboaca <ramona.bolboaca@analog.com>,
Ibrahim Tilki <Ibrahim.Tilki@analog.com>,
ChiaEn Wu <chiaen_wu@richtek.com>,
William Breathitt Gray <william.gray@linaro.org>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 6/6] iio: adc: mcp3911: add support for the whole MCP39xx family
Date: Tue, 15 Aug 2023 18:44:56 +0300 [thread overview]
Message-ID: <ZNudeE+VNzSqFRGY@smile.fi.intel.com> (raw)
In-Reply-To: <20230814121010.184842-6-marcus.folkesson@gmail.com>
On Mon, Aug 14, 2023 at 02:10:10PM +0200, Marcus Folkesson wrote:
> Microchip does have many similar chips, add support for those.
>
> The new supported chips are:
> - microchip,mcp3910
> - microchip,mcp3912
> - microchip,mcp3913
> - microchip,mcp3914
> - microchip,mcp3918
> - microchip,mcp3919
...
> struct {
> - u32 channels[MCP3911_NUM_CHANNELS];
> + u32 channels[MCP39XX_MAX_NUM_CHANNELS];
> s64 ts __aligned(8);
Can we actually have the __aligned_s64 defined?
Rhetorical... Let me send a patch for that as it's not related to this series.
> } scan;
...
> + /* Enable offset*/
Missing space.
...
> +static int mcp3911_get_osr(struct mcp3911 *adc, u32 *val)
> +{
> + int ret, osr;
> +
> + ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
> + if (ret)
> + return ret;
> +
> + osr = FIELD_GET(MCP3911_CONFIG_OSR, *val);
> + *val = 32 << osr;
> + return ret;
return 0;
> +}
...
> {
> - struct device *dev = &adc->spi->dev;
> u32 regval;
> int ret;
> + struct device *dev = &adc->spi->dev;
Stray change.
...
> + /* Disable offset to ignore any old values in offset register*/
Missing space.
...
> + u32 regval;
> + int ret;
> + struct device *dev = &adc->spi->dev;
Make the longer line first.
...
> + dev_dbg(dev,
> + "use internal voltage reference (1.2V)\n");
One line.
...
> + dev_dbg(dev,
> + "use crystal oscillator as clocksource\n");
Ditto.
(This is the outcome of the exercise with temporary dev variable)
...
> + ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
> if (ret)
> - return ret;
> + device_property_read_u32(dev, "device-addr", &adc->dev_addr);
> + if (adc->dev_addr > 3) {
> + dev_err_probe(dev, -EINVAL,
> + "invalid device address (%i). Must be in range 0-3.\n",
> + adc->dev_addr);
Missing return?
return dev_err_probe(...);
> + }
> + dev_dbg(dev, "use device address %i\n", adc->dev_addr);
--
With Best Regards,
Andy Shevchenko
prev parent reply other threads:[~2023-08-15 15:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-14 12:10 [PATCH v5 1/6] dt-bindings: iio: adc: mcp3911: add support for the whole MCP39xx family Marcus Folkesson
2023-08-14 12:10 ` [PATCH v5 2/6] iio: adc: mcp3911: make use of dev_err_probe() Marcus Folkesson
2023-08-15 14:36 ` Andy Shevchenko
2023-08-14 12:10 ` [PATCH v5 3/6] iio: adc: mcp3911: simplify usage of spi->dev Marcus Folkesson
2023-08-15 14:53 ` Andy Shevchenko
2023-08-14 12:10 ` [PATCH v5 4/6] iio: adc: mcp3911: fix indentation Marcus Folkesson
2023-08-15 14:58 ` Andy Shevchenko
2023-08-15 16:55 ` Marcus Folkesson
2023-08-15 17:04 ` Andy Shevchenko
2023-08-14 12:10 ` [PATCH v5 5/6] iio: adc: mcp3911: avoid ambiguity parameters in macros Marcus Folkesson
2023-08-15 14:56 ` Andy Shevchenko
2023-08-15 16:49 ` Marcus Folkesson
2023-08-15 16:54 ` Andy Shevchenko
2023-08-14 12:10 ` [PATCH v5 6/6] iio: adc: mcp3911: add support for the whole MCP39xx family Marcus Folkesson
2023-08-15 15:44 ` Andy Shevchenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZNudeE+VNzSqFRGY@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=Ibrahim.Tilki@analog.com \
--cc=arnd@arndb.de \
--cc=chiaen_wu@richtek.com \
--cc=conor+dt@kernel.org \
--cc=cy_huang@richtek.com \
--cc=demonsingur@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=haibo.chen@nxp.com \
--cc=jic23@kernel.org \
--cc=kent@minoris.se \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcus.folkesson@gmail.com \
--cc=ramona.bolboaca@analog.com \
--cc=robh+dt@kernel.org \
--cc=william.gray@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox