* Re: usb: dwc3: some USB devices not working after 6.4.8
2023-09-06 1:32 ` Thinh Nguyen
2023-09-06 16:29 ` Jisheng Zhang
@ 2023-09-07 17:47 ` Kenta Sato
2023-09-07 23:55 ` Thinh Nguyen
1 sibling, 1 reply; 8+ messages in thread
From: Kenta Sato @ 2023-09-07 17:47 UTC (permalink / raw)
To: Thinh Nguyen
Cc: Bagas Sanjaya, Linux Kernel Mailing List, Jisheng Zhang,
Greg Kroah-Hartman, Linux Regressions, Linux USB, Linux Stable
[-- Attachment #1: Type: text/plain, Size: 5967 bytes --]
On Wed, Sep 6, 2023 at 10:32 AM Thinh Nguyen <Thinh.Nguyen@synopsys.com> wrote:
>
> On Mon, Sep 04, 2023, Bagas Sanjaya wrote:
> > On Sun, Sep 03, 2023 at 09:19:13PM +0900, Kenta Sato wrote:
> > > Hi,
> > >
> > > I am using the FriendlyElec NanoPi R4S board.
> > > When I update the kernel from 6.4.7 to 6.4.11, 6.4.13, and 6.5.1, it
> > > doesn't recognize some USB devices.
> > >
> > > The board has two USB 3.0 ports. I connected 1) BUFFALO USB Flash Disk
> > > (high-speed) and 2) NETGEAR A6210 (SuperSpeed) to each port.
> > > 1) is often not recognized. On the other hand, 2) was working while I
> > > was testing.
> > > Regardless of whether a USB device is connected, I could see the below
> > > message on dmesg:
> > >
> > > [ 0.740993] phy phy-ff7c0000.phy.8: phy poweron failed --> -110
> > > [ 0.741585] dwc3 fe800000.usb: error -ETIMEDOUT: failed to initialize core
> > > [ 0.742334] dwc3: probe of fe800000.usb failed with error -110
> > > [ 0.751635] rockchip-usb2phy ff770000.syscon:usb2phy@e460:
> > > Requested PHY is disabled
> > >
> > > Is there any idea on this?
> > >
> > > The cause seems to be related to this commit. I tried reverting this
> > > change and the issue seemed to be solved.
> > >
> > > >From 317d6e4c12b46bde61248ea4ab5e19f68cbd1c57 Mon Sep 17 00:00:00 2001
> > > From: Jisheng Zhang <jszhang@kernel.org>
> > > Date: Wed, 28 Jun 2023 00:20:18 +0800
> > > Subject: usb: dwc3: don't reset device side if dwc3 was configured as
> > > host-only
> > >
> > > commit e835c0a4e23c38531dcee5ef77e8d1cf462658c7 upstream.
> > >
> > > Commit c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on
> > > system_suspend in host mode") replaces check for HOST only dr_mode with
> > > current_dr_role. But during booting, the current_dr_role isn't
> > > initialized, thus the device side reset is always issued even if dwc3
> > > was configured as host-only. What's more, on some platforms with host
> > > only dwc3, aways issuing device side reset by accessing device register
> > > block can cause kernel panic.
> > >
> > > Fixes: c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on
> > > system_suspend in host mode")
> > > Cc: stable <stable@kernel.org>
> > > Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> > > Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> > > Link: https://lore.kernel.org/r/20230627162018.739-1-jszhang@kernel.org
> > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > ---
> > > drivers/usb/dwc3/core.c | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.4.8&id=317d6e4c12b46bde61248ea4ab5e19f68cbd1c57
> > >
> >
> > Thanks for the regression report. I'm adding it to regzbot:
> >
> > #regzbot ^introduced: e835c0a4e23c38
> > #regzbot title: some USB devices unrecognized caused by not resetting dwc3 device if it is host-only
> >
>
> When there's phy reconfiguration, we need follow through a soft reset
> sequence. It may be done when we pass to xHCI driver through its
> initialization of USBCMD.HCRST. However, looks like we need to do a
> soft reset before setting more core parameters in dwc3.
>
> Can we try to just reset the phy instead to see if it helps? If not, we
> may have to teach dwc3 about xHCI's USBCMD.HCRST.
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 9c6bf054f15d..66186ef34c6d 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1104,9 +1104,42 @@ static int dwc3_core_init(struct dwc3 *dwc)
> if (ret)
> goto err_exit_ulpi;
>
> - ret = dwc3_core_soft_reset(dwc);
> - if (ret)
> - goto err_exit_phy;
> + /*
> + * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n
> + * is port index. If this is a multiport host, then we need to reset
> + * all active ports.
> + */
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> + reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> +
> + /*
> + * Must meet usb3 phy reset assertion timing,
> + * should be much less than 20ms.
> + */
> + msleep(20);
> +
> + reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> +
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> + reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +
> + /*
> + * Must meet usb2 phy reset assertion timing,
> + * should be much less than 20ms.
> + */
> + msleep(20);
> +
> + reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +
> + /*
> + * Some platforms may need more time to synchronize the clocks,
> + * 100ms should be enough for all.
> + */
> + msleep(100);
>
> if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
> !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
>
>
> --
Hi Thinh,
I tested your patch with 6.5.1. It seems to solve the issue and the
kernel worked the same as 6.4.7.
I attached three log (dmesg) files:
- withpatch.log --- 6.5.1 + patch
The kernel could detect both USB devices. No "-ETIMEDOUT: failed to
initialize core" message.
- nopatch.log --- 6.5.1 without any patches (case 1)
The kernel could detect NETGEAR A6210 but not BUFFALO USB Flash Disk.
That was happening less often (about 1 time per 5 boots).
- nopatch-succ.log --- 6.5.1 without any patches (case 2)
The kernel could detect both USB devices even if it showed
"-ETIMEDOUT: failed to initialize core".
Please let me know if you need anything else.
Thank you.
Kenta
>
> Thanks,
> Thinh
[-- Attachment #2: nopatch-succ.log --]
[-- Type: text/x-log, Size: 22524 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.5.1-nopatch (cocoa@cumin) (aarch64-linux-gnu-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #1 SMP Fri Sep 8 01:57:22 JST 2023
[ 0.000000] Machine model: FriendlyElec NanoPi R4S
[ 0.000000] earlycon: uart0 at MMIO32 0x00000000ff1a0000 (options '1500000n8')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 17 pages/cpu s38176 r0 d31456 u69632
[ 0.000000] pcpu-alloc: s38176 r0 d31456 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: earlycon console=ttyS2,1500000n8 rdinit=/sbin/init
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000ede00000-0x00000000f1e00000] (64MB)
[ 0.000000] Memory: 3897700K/4061184K available (8512K kernel code, 1560K rwdata, 2892K rodata, 2112K init, 514K bss, 163484K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @480000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000000450000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000460000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002580] Console: colour dummy device 80x25
[ 0.003054] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.004025] pid_max: default: 32768 minimum: 301
[ 0.009998] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.010721] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.015364] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.017090] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.018174] rcu: Hierarchical SRCU implementation.
[ 0.018622] rcu: Max phase no-delay instances is 400.
[ 0.019950] Platform MSI: msi-controller@fee20000 domain created
[ 0.021029] PCI/MSI: /interrupt-controller@fee00000/msi-controller@fee20000 domain created
[ 0.023445] smp: Bringing up secondary CPUs ...
[ 0.024795] Detected VIPT I-cache on CPU1
[ 0.024886] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.024910] GICv3: CPU1: using allocated LPI pending table @0x0000000000470000
[ 0.024974] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.025908] Detected VIPT I-cache on CPU2
[ 0.025978] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.025996] GICv3: CPU2: using allocated LPI pending table @0x0000000000500000
[ 0.026037] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.026998] Detected VIPT I-cache on CPU3
[ 0.027065] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.027083] GICv3: CPU3: using allocated LPI pending table @0x0000000000510000
[ 0.027121] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.028015] CPU features: detected: Spectre-v2
[ 0.028031] CPU features: detected: Spectre-BHB
[ 0.028040] Detected PIPT I-cache on CPU4
[ 0.028120] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.028138] GICv3: CPU4: using allocated LPI pending table @0x0000000000520000
[ 0.028182] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.029112] Detected PIPT I-cache on CPU5
[ 0.029177] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.029195] GICv3: CPU5: using allocated LPI pending table @0x0000000000530000
[ 0.029230] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.029361] smp: Brought up 1 node, 6 CPUs
[ 0.041994] SMP: Total of 6 processors activated.
[ 0.042434] CPU features: detected: 32-bit EL0 Support
[ 0.042925] CPU features: detected: CRC32 instructions
[ 0.043545] CPU: All CPU(s) started at EL2
[ 0.043945] alternatives: applying system-wide alternatives
[ 0.048394] devtmpfs: initialized
[ 0.062332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.063310] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.066472] pinctrl core: initialized pinctrl subsystem
[ 0.068747] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.069691] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.070691] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.072551] thermal_sys: Registered thermal governor 'fair_share'
[ 0.072561] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.073136] thermal_sys: Registered thermal governor 'step_wise'
[ 0.073710] thermal_sys: Registered thermal governor 'user_space'
[ 0.074277] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.075063] cpuidle: using governor ladder
[ 0.076335] cpuidle: using governor menu
[ 0.076851] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.077683] ASID allocator initialised with 65536 entries
[ 0.079056] Serial: AMBA PL011 UART driver
[ 0.104019] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff8f0000/port/endpoint@2
[ 0.104889] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff900000/port/endpoint@2
[ 0.112689] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.114142] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[ 0.115279] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.116388] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[ 0.117362] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.118456] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[ 0.119469] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.120556] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[ 0.121514] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.122601] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[ 0.129101] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.129765] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.130359] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.131005] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.131597] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.132240] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.132832] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.133475] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.135418] cryptd: max_cpu_qlen set to 1000
[ 0.137868] iommu: Default domain type: Translated
[ 0.138327] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.139699] SCSI subsystem initialized
[ 0.140292] libata version 3.00 loaded.
[ 0.140450] usbcore: registered new interface driver usbfs
[ 0.141025] usbcore: registered new interface driver hub
[ 0.141561] usbcore: registered new device driver usb
[ 0.142437] EDAC MC: Ver: 3.0.0
[ 0.143345] scmi_core: SCMI protocol bus registered
[ 0.144403] clocksource: Switched to clocksource arch_sys_counter
[ 0.158667] PCI: CLS 0 bytes, default 64
[ 0.159469] Unpacking initramfs...
[ 0.170614] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.171294] zbud: loaded
[ 0.230835] xor: measuring software checksum speed
[ 0.234705] 8regs : 2906 MB/sec
[ 0.238276] 32regs : 3124 MB/sec
[ 0.242587] arm64_neon : 2536 MB/sec
[ 0.243006] xor: using function: 32regs (3124 MB/sec)
[ 0.243509] async_tx: api initialized (async)
[ 0.244046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.244769] io scheduler mq-deadline registered
[ 0.245201] io scheduler kyber registered
[ 0.245838] io scheduler bfq registered
[ 0.266753] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.267503] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.270100] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.270854] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.273973] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.277868] printk: console [ttyS2] disabled
[ 0.278689] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.279736] printk: console [ttyS2] enabled
[ 0.280518] printk: bootconsole [uart0] disabled
[ 0.302589] phy phy-ff800000.phy.10: phy poweron failed --> -110
[ 0.303166] dwc3 fe900000.usb: error -ETIMEDOUT: failed to initialize core
[ 0.303884] dwc3: probe of fe900000.usb failed with error -110
[ 0.307836] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.308209] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled
[ 0.308599] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 0.309050] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.309050] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled
[ 0.309064] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.309306] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 0.309522] ohci-platform fe3e0000.usb: irq 47, io mem 0xfe3e0000
[ 0.309853] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010
[ 0.310209] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.310231] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.310461] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 3
[ 0.310583] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 4
[ 0.310625] ehci-platform fe3c0000.usb: irq 45, io mem 0xfe3c0000
[ 0.310710] ohci-platform fe3a0000.usb: irq 46, io mem 0xfe3a0000
[ 0.310961] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xfe800000
[ 0.311770] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[ 0.312398] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.312867] ehci-platform fe380000.usb: irq 44, io mem 0xfe380000
[ 0.313757] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 0.318416] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.318829] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.319749] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.321879] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.322542] usb usb3: Product: EHCI Host Controller
[ 0.322981] usb usb3: Manufacturer: Linux 6.5.1-nopatch ehci_hcd
[ 0.323529] usb usb3: SerialNumber: fe3c0000.usb
[ 0.324652] hub 3-0:1.0: USB hub found
[ 0.325049] hub 3-0:1.0: 1 port detected
[ 0.325410] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.326888] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.327646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.328291] usb usb1: Product: xHCI Host Controller
[ 0.328742] usb usb1: Manufacturer: Linux 6.5.1-nopatch xhci-hcd
[ 0.329280] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 0.330443] hub 1-0:1.0: USB hub found
[ 0.330854] hub 1-0:1.0: 1 port detected
[ 0.331867] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.332904] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[ 0.333657] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.334297] usb usb6: Product: xHCI Host Controller
[ 0.334745] usb usb6: Manufacturer: Linux 6.5.1-nopatch xhci-hcd
[ 0.335278] usb usb6: SerialNumber: xhci-hcd.0.auto
[ 0.336312] hub 6-0:1.0: USB hub found
[ 0.336731] hub 6-0:1.0: 1 port detected
[ 0.337762] usbcore: registered new interface driver cdc_wdm
[ 0.337965] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.338305] usbcore: registered new interface driver usbtmc
[ 0.338484] Freeing initrd memory: 2828K
[ 0.339024] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.339804] usbcore: registered new interface driver uas
[ 0.339870] usb usb5: Product: EHCI Host Controller
[ 0.340572] usbcore: registered new interface driver usb-storage
[ 0.340983] usb usb5: Manufacturer: Linux 6.5.1-nopatch ehci_hcd
[ 0.341446] usbcore: registered new interface driver ums-realtek
[ 0.341950] usb usb5: SerialNumber: fe380000.usb
[ 0.344089] hub 5-0:1.0: USB hub found
[ 0.344505] hub 5-0:1.0: 1 port detected
[ 0.347005] i2c 0-001b: Fixed dependency cycle(s) with /i2c@ff3c0000/pmic@1b/regulators/LDO_REG8
[ 0.349860] device-mapper: uevent: version 1.0.3
[ 0.350625] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 0.353576] sdhci: Secure Digital Host Controller Interface driver
[ 0.354128] sdhci: Copyright(c) Pierre Ossman
[ 0.354764] Synopsys Designware Multimedia Card Interface Driver
[ 0.355860] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.358577] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.361957] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.366262] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
[ 0.366790] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.367056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.368393] usb usb2: Product: Generic Platform OHCI controller
[ 0.368925] usb usb2: Manufacturer: Linux 6.5.1-nopatch ohci_hcd
[ 0.369475] usb usb2: SerialNumber: fe3e0000.usb
[ 0.369958] watchdog: Delayed init of the lockup detector failed: -19
[ 0.370547] watchdog: Hard watchdog permanently disabled
[ 0.371179] hub 2-0:1.0: USB hub found
[ 0.371676] hub 2-0:1.0: 1 port detected
[ 0.373501] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
[ 0.374242] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.374910] usb usb4: Product: Generic Platform OHCI controller
[ 0.375459] usb usb4: Manufacturer: Linux 6.5.1-nopatch ohci_hcd
[ 0.375997] usb usb4: SerialNumber: fe3a0000.usb
[ 0.377249] hub 4-0:1.0: USB hub found
[ 0.377681] hub 4-0:1.0: 1 port detected
[ 0.379955] zswap: loaded using pool lz4/z3fold
[ 0.745294] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 0.876643] usb 1-1: New USB device found, idVendor=0411, idProduct=0111, bcdDevice= 1.00
[ 0.877430] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.878067] usb 1-1: Product: USB Flash Disk
[ 0.878467] usb 1-1: Manufacturer: BUFFALO
[ 0.878838] usb 1-1: SerialNumber: 07B31F089445408A
[ 0.881538] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 0.883168] scsi host0: usb-storage 1-1:1.0
[ 1.676527] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.677126] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.707794] clk: Disabling unused clocks
[ 1.707875] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 1.708863] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 1.709498] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 1.709958] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 1.710063] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 64,32 bit host data width,256 deep fifo
[ 1.710662] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[ 1.711965] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 1.712340] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[ 1.713816] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 1.714270] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 1.717081] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[ 1.717719] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 1.718218] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[ 1.718856] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[ 1.719763] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[ 1.720430] pci 0000:00:00.0: supports D1
[ 1.720797] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 1.725923] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.727832] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.728820] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 1.729441] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[ 1.730072] pci 0000:01:00.0: reg 0x10: [io size 0x0100]
[ 1.730644] pci 0000:01:00.0: reg 0x18: [mem 0xfa004000-0xfa004fff 64bit]
[ 1.731298] pci 0000:01:00.0: reg 0x20: [mem 0xfa000000-0xfa003fff 64bit]
[ 1.731966] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[ 1.732755] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 1.733739] pci 0000:01:00.0: supports D1 D2
[ 1.734126] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.738467] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[ 1.739091] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[ 1.739740] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64bit]
[ 1.740454] pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64bit]
[ 1.741145] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100]
[ 1.741734] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100]
[ 1.742121] Freeing unused kernel memory: 2112K
[ 1.742328] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.743188] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 1.744100] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.745022] pcieport 0000:00:00.0: PME: Signaling with IRQ 70
[ 1.746151] pcieport 0000:00:00.0: AER: enabled with IRQ 70
[ 1.777245] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 1.778212] mmc1: new high speed SDHC card at address b368
[ 1.780857] mmcblk1: mmc1:b368 USD 7.47 GiB
[ 1.792239] mmcblk1: p1
[ 1.808245] Checked W+X mappings: passed, no W+X pages found
[ 1.808779] rodata_test: all tests were successful
[ 1.809213] Run /sbin/init as init process
[ 1.809591] with arguments:
[ 1.809599] /sbin/init
[ 1.809607] with environment:
[ 1.809613] HOME=/
[ 1.809620] TERM=linux
[ 1.897484] scsi 0:0:0:0: Direct-Access BUFFALO USB Flash Disk 3.10 PQ: 0 ANSI: 0 CCS
[ 1.899573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.901140] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 1.903450] sd 0:0:0:0: [sda] Write Protect is off
[ 1.903891] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 1.905776] sd 0:0:0:0: [sda] No Caching mode page found
[ 1.906259] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1.931561] sda: sda1
[ 1.932572] sd 0:0:0:0: [sda] Attached SCSI removable disk
[-- Attachment #3: nopatch.log --]
[-- Type: text/x-log, Size: 21816 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.5.1-nopatch (cocoa@cumin) (aarch64-linux-gnu-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #1 SMP Fri Sep 8 01:57:22 JST 2023
[ 0.000000] Machine model: FriendlyElec NanoPi R4S
[ 0.000000] earlycon: uart0 at MMIO32 0x00000000ff1a0000 (options '1500000n8')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 17 pages/cpu s38176 r0 d31456 u69632
[ 0.000000] pcpu-alloc: s38176 r0 d31456 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: earlycon console=ttyS2,1500000n8 rdinit=/sbin/init
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000ede00000-0x00000000f1e00000] (64MB)
[ 0.000000] Memory: 3897700K/4061184K available (8512K kernel code, 1560K rwdata, 2892K rodata, 2112K init, 514K bss, 163484K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @480000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000000450000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000460000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002580] Console: colour dummy device 80x25
[ 0.003054] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.004027] pid_max: default: 32768 minimum: 301
[ 0.009996] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.010717] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.015376] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.017105] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.018190] rcu: Hierarchical SRCU implementation.
[ 0.018641] rcu: Max phase no-delay instances is 400.
[ 0.019970] Platform MSI: msi-controller@fee20000 domain created
[ 0.021051] PCI/MSI: /interrupt-controller@fee00000/msi-controller@fee20000 domain created
[ 0.023467] smp: Bringing up secondary CPUs ...
[ 0.024819] Detected VIPT I-cache on CPU1
[ 0.024912] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.024935] GICv3: CPU1: using allocated LPI pending table @0x0000000000470000
[ 0.025000] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.025933] Detected VIPT I-cache on CPU2
[ 0.025999] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.026018] GICv3: CPU2: using allocated LPI pending table @0x0000000000500000
[ 0.026058] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.027021] Detected VIPT I-cache on CPU3
[ 0.027086] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.027105] GICv3: CPU3: using allocated LPI pending table @0x0000000000510000
[ 0.027143] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.028038] CPU features: detected: Spectre-v2
[ 0.028054] CPU features: detected: Spectre-BHB
[ 0.028062] Detected PIPT I-cache on CPU4
[ 0.028142] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.028161] GICv3: CPU4: using allocated LPI pending table @0x0000000000520000
[ 0.028205] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.029153] Detected PIPT I-cache on CPU5
[ 0.029219] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.029237] GICv3: CPU5: using allocated LPI pending table @0x0000000000530000
[ 0.029272] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.029403] smp: Brought up 1 node, 6 CPUs
[ 0.042051] SMP: Total of 6 processors activated.
[ 0.042490] CPU features: detected: 32-bit EL0 Support
[ 0.042980] CPU features: detected: CRC32 instructions
[ 0.043602] CPU: All CPU(s) started at EL2
[ 0.044003] alternatives: applying system-wide alternatives
[ 0.048444] devtmpfs: initialized
[ 0.062382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.063354] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.066527] pinctrl core: initialized pinctrl subsystem
[ 0.068811] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.069762] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.070769] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.072632] thermal_sys: Registered thermal governor 'fair_share'
[ 0.072641] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.073217] thermal_sys: Registered thermal governor 'step_wise'
[ 0.073793] thermal_sys: Registered thermal governor 'user_space'
[ 0.074364] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.075158] cpuidle: using governor ladder
[ 0.076485] cpuidle: using governor menu
[ 0.077148] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.077977] ASID allocator initialised with 65536 entries
[ 0.079421] Serial: AMBA PL011 UART driver
[ 0.104377] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff8f0000/port/endpoint@2
[ 0.105249] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff900000/port/endpoint@2
[ 0.113042] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.114323] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[ 0.115404] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.116531] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[ 0.117481] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.118583] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[ 0.119656] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.120762] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[ 0.121753] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.122852] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[ 0.129383] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.130050] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.130648] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.131296] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.131892] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.132535] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.133132] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.133778] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.135651] cryptd: max_cpu_qlen set to 1000
[ 0.137982] iommu: Default domain type: Translated
[ 0.138454] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.139835] SCSI subsystem initialized
[ 0.140372] libata version 3.00 loaded.
[ 0.140561] usbcore: registered new interface driver usbfs
[ 0.141110] usbcore: registered new interface driver hub
[ 0.141656] usbcore: registered new device driver usb
[ 0.142538] EDAC MC: Ver: 3.0.0
[ 0.143473] scmi_core: SCMI protocol bus registered
[ 0.144562] clocksource: Switched to clocksource arch_sys_counter
[ 0.158756] PCI: CLS 0 bytes, default 64
[ 0.159513] Unpacking initramfs...
[ 0.170852] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.171564] zbud: loaded
[ 0.231136] xor: measuring software checksum speed
[ 0.235017] 8regs : 2901 MB/sec
[ 0.238606] 32regs : 3112 MB/sec
[ 0.242923] arm64_neon : 2537 MB/sec
[ 0.243349] xor: using function: 32regs (3112 MB/sec)
[ 0.243857] async_tx: api initialized (async)
[ 0.244392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.245122] io scheduler mq-deadline registered
[ 0.245565] io scheduler kyber registered
[ 0.246195] io scheduler bfq registered
[ 0.269505] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.270250] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.273226] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.273960] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.277861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.281049] printk: console [ttyS2] disabled
[ 0.281790] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.282833] printk: console [ttyS2] enabled
[ 0.283618] printk: bootconsole [uart0] disabled
[ 0.299774] phy phy-ff7c0000.phy.8: phy poweron failed --> -110
[ 0.300337] dwc3 fe800000.usb: error -ETIMEDOUT: failed to initialize core
[ 0.301043] dwc3: probe of fe800000.usb failed with error -110
[ 0.311360] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.311830] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled
[ 0.312156] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 0.312579] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.312581] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled
[ 0.312594] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.312833] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 0.313027] ohci-platform fe3e0000.usb: irq 47, io mem 0xfe3e0000
[ 0.313377] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010
[ 0.313572] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.313590] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.313855] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 4
[ 0.313920] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 3
[ 0.313980] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 5
[ 0.314115] ehci-platform fe380000.usb: irq 44, io mem 0xfe380000
[ 0.314158] ehci-platform fe3c0000.usb: irq 45, io mem 0xfe3c0000
[ 0.314515] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xfe900000
[ 0.315161] ohci-platform fe3a0000.usb: irq 46, io mem 0xfe3a0000
[ 0.315930] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.320564] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.321027] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 0.321743] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.321871] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.322381] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.326051] usb usb3: Product: EHCI Host Controller
[ 0.326491] usb usb3: Manufacturer: Linux 6.5.1-nopatch ehci_hcd
[ 0.327046] usb usb3: SerialNumber: fe380000.usb
[ 0.327570] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.328180] hub 3-0:1.0: USB hub found
[ 0.328592] hub 3-0:1.0: 1 port detected
[ 0.329893] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.330649] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.331290] usb usb1: Product: xHCI Host Controller
[ 0.331735] usb usb1: Manufacturer: Linux 6.5.1-nopatch xhci-hcd
[ 0.332269] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 0.333305] hub 1-0:1.0: USB hub found
[ 0.333721] hub 1-0:1.0: 1 port detected
[ 0.334796] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.335565] Freeing initrd memory: 2828K
[ 0.335799] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[ 0.336684] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.337330] usb usb6: Product: xHCI Host Controller
[ 0.337781] usb usb6: Manufacturer: Linux 6.5.1-nopatch xhci-hcd
[ 0.338317] usb usb6: SerialNumber: xhci-hcd.0.auto
[ 0.339366] hub 6-0:1.0: USB hub found
[ 0.339764] hub 6-0:1.0: 1 port detected
[ 0.340645] usbcore: registered new interface driver cdc_wdm
[ 0.340865] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.341180] usbcore: registered new interface driver usbtmc
[ 0.341896] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.342652] usbcore: registered new interface driver uas
[ 0.343030] usb usb5: Product: EHCI Host Controller
[ 0.343525] usbcore: registered new interface driver usb-storage
[ 0.343923] usb usb5: Manufacturer: Linux 6.5.1-nopatch ehci_hcd
[ 0.344472] usbcore: registered new interface driver ums-realtek
[ 0.344989] usb usb5: SerialNumber: fe3c0000.usb
[ 0.346625] hub 5-0:1.0: USB hub found
[ 0.347022] hub 5-0:1.0: 1 port detected
[ 0.349929] i2c 0-001b: Fixed dependency cycle(s) with /i2c@ff3c0000/pmic@1b/regulators/LDO_REG8
[ 0.352765] device-mapper: uevent: version 1.0.3
[ 0.353499] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 0.356456] sdhci: Secure Digital Host Controller Interface driver
[ 0.357020] sdhci: Copyright(c) Pierre Ossman
[ 0.357643] Synopsys Designware Multimedia Card Interface Driver
[ 0.358761] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.361482] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.364804] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.369326] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
[ 0.370100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.370757] usb usb2: Product: Generic Platform OHCI controller
[ 0.371287] usb usb2: Manufacturer: Linux 6.5.1-nopatch ohci_hcd
[ 0.371854] usb usb2: SerialNumber: fe3e0000.usb
[ 0.372830] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.373178] hub 2-0:1.0: USB hub found
[ 0.373969] hub 2-0:1.0: 1 port detected
[ 0.375856] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
[ 0.376620] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.377266] usb usb4: Product: Generic Platform OHCI controller
[ 0.377806] usb usb4: Manufacturer: Linux 6.5.1-nopatch ohci_hcd
[ 0.378342] usb usb4: SerialNumber: fe3a0000.usb
[ 0.378804] watchdog: Delayed init of the lockup detector failed: -19
[ 0.379381] watchdog: Hard watchdog permanently disabled
[ 0.379794] hub 4-0:1.0: USB hub found
[ 0.380243] hub 4-0:1.0: 1 port detected
[ 0.385289] zswap: loaded using pool lz4/z3fold
[ 1.313850] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.328334] usb 6-1: New USB device found, idVendor=0846, idProduct=9053, bcdDevice= 1.00
[ 1.329079] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.329723] usb 6-1: Product: A6210
[ 1.330040] usb 6-1: Manufacturer: NETGEAR
[ 1.330407] usb 6-1: SerialNumber: 100
[ 1.621597] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.622198] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.649753] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 1.650448] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[ 1.651081] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 1.651234] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[ 1.651887] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 1.653183] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 1.653353] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 1.653756] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 64,32 bit host data width,256 deep fifo
[ 1.655552] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 1.656278] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[ 1.656902] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 1.657399] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[ 1.658030] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[ 1.658938] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[ 1.659606] pci 0000:00:00.0: supports D1
[ 1.659972] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 1.667115] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.668104] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 1.668683] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.668729] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[ 1.670139] pci 0000:01:00.0: reg 0x10: [io size 0x0100]
[ 1.670713] pci 0000:01:00.0: reg 0x18: [mem 0xfa004000-0xfa004fff 64bit]
[ 1.671367] pci 0000:01:00.0: reg 0x20: [mem 0xfa000000-0xfa003fff 64bit]
[ 1.672033] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[ 1.672822] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 1.673807] pci 0000:01:00.0: supports D1 D2
[ 1.674196] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.678726] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[ 1.679353] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[ 1.680009] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64bit]
[ 1.680725] pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64bit]
[ 1.681417] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100]
[ 1.681993] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100]
[ 1.682601] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.683053] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 1.683961] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.684884] pcieport 0000:00:00.0: PME: Signaling with IRQ 70
[ 1.686056] pcieport 0000:00:00.0: AER: enabled with IRQ 70
[ 1.690498] clk: Disabling unused clocks
[ 1.691969] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 1.693913] Freeing unused kernel memory: 2112K
[ 1.722793] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 1.724313] mmc1: new high speed SDHC card at address b368
[ 1.727457] mmcblk1: mmc1:b368 USD 7.47 GiB
[ 1.739880] mmcblk1: p1
[ 1.761695] Checked W+X mappings: passed, no W+X pages found
[ 1.762218] rodata_test: all tests were successful
[ 1.762663] Run /sbin/init as init process
[ 1.763031] with arguments:
[ 1.763038] /sbin/init
[ 1.763046] with environment:
[ 1.763052] HOME=/
[ 1.763059] TERM=linux
[-- Attachment #4: withpatch.log --]
[-- Type: text/x-log, Size: 24214 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.5.1-dwc3test (cocoa@cumin) (aarch64-linux-gnu-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #7 SMP Fri Sep 8 01:54:18 JST 2023
[ 0.000000] Machine model: FriendlyElec NanoPi R4S
[ 0.000000] earlycon: uart0 at MMIO32 0x00000000ff1a0000 (options '1500000n8')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 17 pages/cpu s38176 r0 d31456 u69632
[ 0.000000] pcpu-alloc: s38176 r0 d31456 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: earlycon console=ttyS2,1500000n8 rdinit=/sbin/init
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000ede00000-0x00000000f1e00000] (64MB)
[ 0.000000] Memory: 3897700K/4061184K available (8512K kernel code, 1560K rwdata, 2892K rodata, 2112K init, 514K bss, 163484K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @480000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000000450000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000460000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002575] Console: colour dummy device 80x25
[ 0.003050] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.010072] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.010796] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.015475] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.017208] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.018294] rcu: Hierarchical SRCU implementation.
[ 0.018743] rcu: Max phase no-delay instances is 400.
[ 0.020074] Platform MSI: msi-controller@fee20000 domain created
[ 0.021150] PCI/MSI: /interrupt-controller@fee00000/msi-controller@fee20000 domain created
[ 0.023552] smp: Bringing up secondary CPUs ...
[ 0.024900] Detected VIPT I-cache on CPU1
[ 0.024994] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.025017] GICv3: CPU1: using allocated LPI pending table @0x0000000000470000
[ 0.025080] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.026007] Detected VIPT I-cache on CPU2
[ 0.026074] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.026093] GICv3: CPU2: using allocated LPI pending table @0x0000000000500000
[ 0.026135] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.027098] Detected VIPT I-cache on CPU3
[ 0.027163] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.027181] GICv3: CPU3: using allocated LPI pending table @0x0000000000510000
[ 0.027220] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.028108] CPU features: detected: Spectre-v2
[ 0.028123] CPU features: detected: Spectre-BHB
[ 0.028132] Detected PIPT I-cache on CPU4
[ 0.028211] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.028230] GICv3: CPU4: using allocated LPI pending table @0x0000000000520000
[ 0.028275] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.029197] Detected PIPT I-cache on CPU5
[ 0.029263] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.029282] GICv3: CPU5: using allocated LPI pending table @0x0000000000530000
[ 0.029316] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.029449] smp: Brought up 1 node, 6 CPUs
[ 0.042089] SMP: Total of 6 processors activated.
[ 0.042531] CPU features: detected: 32-bit EL0 Support
[ 0.043017] CPU features: detected: CRC32 instructions
[ 0.043635] CPU: All CPU(s) started at EL2
[ 0.044036] alternatives: applying system-wide alternatives
[ 0.048499] devtmpfs: initialized
[ 0.062491] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.063467] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.066663] pinctrl core: initialized pinctrl subsystem
[ 0.068935] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.069879] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.070881] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.072746] thermal_sys: Registered thermal governor 'fair_share'
[ 0.072755] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.073331] thermal_sys: Registered thermal governor 'step_wise'
[ 0.073905] thermal_sys: Registered thermal governor 'user_space'
[ 0.074472] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.075258] cpuidle: using governor ladder
[ 0.076568] cpuidle: using governor menu
[ 0.077229] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.078052] ASID allocator initialised with 65536 entries
[ 0.079490] Serial: AMBA PL011 UART driver
[ 0.104440] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff8f0000/port/endpoint@2
[ 0.105310] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff900000/port/endpoint@2
[ 0.113000] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.114283] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[ 0.115356] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.116477] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[ 0.117427] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.118521] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[ 0.119596] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.120681] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[ 0.121667] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.122757] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[ 0.129306] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.129968] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.130562] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.131208] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.131800] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.132443] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.133035] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.133678] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.135542] cryptd: max_cpu_qlen set to 1000
[ 0.137874] iommu: Default domain type: Translated
[ 0.138346] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.139746] SCSI subsystem initialized
[ 0.140286] libata version 3.00 loaded.
[ 0.140438] usbcore: registered new interface driver usbfs
[ 0.141002] usbcore: registered new interface driver hub
[ 0.141537] usbcore: registered new device driver usb
[ 0.142449] EDAC MC: Ver: 3.0.0
[ 0.143323] scmi_core: SCMI protocol bus registered
[ 0.144412] clocksource: Switched to clocksource arch_sys_counter
[ 0.159026] PCI: CLS 0 bytes, default 64
[ 0.159805] Unpacking initramfs...
[ 0.170742] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.171485] zbud: loaded
[ 0.230931] xor: measuring software checksum speed
[ 0.234799] 8regs : 2904 MB/sec
[ 0.238369] 32regs : 3124 MB/sec
[ 0.242674] arm64_neon : 2544 MB/sec
[ 0.243093] xor: using function: 32regs (3124 MB/sec)
[ 0.243595] async_tx: api initialized (async)
[ 0.244131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.244850] io scheduler mq-deadline registered
[ 0.245283] io scheduler kyber registered
[ 0.245921] io scheduler bfq registered
[ 0.269923] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.270664] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.273694] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.274420] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.278343] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.281579] printk: console [ttyS2] disabled
[ 0.282310] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.283351] printk: console [ttyS2] enabled
[ 0.284135] printk: bootconsole [uart0] disabled
[ 0.335193] Freeing initrd memory: 2828K
[ 0.605965] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled
[ 0.606719] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.606903] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled
[ 0.607501] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[ 0.607938] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.607960] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.607977] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.607982] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.608190] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 2
[ 0.608296] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 4
[ 0.608321] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[ 0.608325] ehci-platform fe380000.usb: irq 45, io mem 0xfe380000
[ 0.608479] ohci-platform fe3a0000.usb: irq 47, io mem 0xfe3a0000
[ 0.608508] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010
[ 0.608584] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xfe800000
[ 0.608768] ehci-platform fe3c0000.usb: irq 46, io mem 0xfe3c0000
[ 0.608818] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.609000] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 0.609020] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.609454] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.614420] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.614753] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.619461] usb usb3: Product: xHCI Host Controller
[ 0.619899] usb usb3: Manufacturer: Linux 6.5.1-dwc3test xhci-hcd
[ 0.620454] usb usb3: SerialNumber: xhci-hcd.0.auto
[ 0.621562] hub 3-0:1.0: USB hub found
[ 0.621961] hub 3-0:1.0: 1 port detected
[ 0.622415] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.623007] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.624029] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[ 0.624791] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.625452] usb usb5: Product: xHCI Host Controller
[ 0.625890] usb usb5: Manufacturer: Linux 6.5.1-dwc3test xhci-hcd
[ 0.626447] usb usb5: SerialNumber: xhci-hcd.0.auto
[ 0.627511] hub 5-0:1.0: USB hub found
[ 0.627907] hub 5-0:1.0: 1 port detected
[ 0.628986] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.629084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.629118] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 6
[ 0.629244] ohci-platform fe3e0000.usb: irq 48, io mem 0xfe3e0000
[ 0.631461] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.632104] usb usb2: Product: EHCI Host Controller
[ 0.632553] usb usb2: Manufacturer: Linux 6.5.1-dwc3test ehci_hcd
[ 0.633094] usb usb2: SerialNumber: fe380000.usb
[ 0.634033] hub 2-0:1.0: USB hub found
[ 0.634411] hub 2-0:1.0: 1 port detected
[ 0.635520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.636263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.636927] usb usb1: Product: EHCI Host Controller
[ 0.637367] usb usb1: Manufacturer: Linux 6.5.1-dwc3test ehci_hcd
[ 0.637932] usb usb1: SerialNumber: fe3c0000.usb
[ 0.638971] hub 1-0:1.0: USB hub found
[ 0.639369] hub 1-0:1.0: 1 port detected
[ 0.640532] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 0.641413] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010
[ 0.642300] xhci-hcd xhci-hcd.1.auto: irq 44, io mem 0xfe900000
[ 0.643084] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.643836] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 0.644548] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 0.645500] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.646240] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.646907] usb usb7: Product: xHCI Host Controller
[ 0.647346] usb usb7: Manufacturer: Linux 6.5.1-dwc3test xhci-hcd
[ 0.647906] usb usb7: SerialNumber: xhci-hcd.1.auto
[ 0.648992] hub 7-0:1.0: USB hub found
[ 0.649433] hub 7-0:1.0: 1 port detected
[ 0.650405] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.651405] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[ 0.652144] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.652811] usb usb8: Product: xHCI Host Controller
[ 0.653250] usb usb8: Manufacturer: Linux 6.5.1-dwc3test xhci-hcd
[ 0.653806] usb usb8: SerialNumber: xhci-hcd.1.auto
[ 0.654876] hub 8-0:1.0: USB hub found
[ 0.655271] hub 8-0:1.0: 1 port detected
[ 0.656231] usbcore: registered new interface driver cdc_wdm
[ 0.656833] usbcore: registered new interface driver usbtmc
[ 0.657584] usbcore: registered new interface driver uas
[ 0.658180] usbcore: registered new interface driver usb-storage
[ 0.658773] usbcore: registered new interface driver ums-realtek
[ 0.664839] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
[ 0.665096] i2c 0-001b: Fixed dependency cycle(s) with /i2c@ff3c0000/pmic@1b/regulators/LDO_REG8
[ 0.665616] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.667039] usb usb4: Product: Generic Platform OHCI controller
[ 0.667582] usb usb4: Manufacturer: Linux 6.5.1-dwc3test ohci_hcd
[ 0.668126] usb usb4: SerialNumber: fe3a0000.usb
[ 0.669023] device-mapper: uevent: version 1.0.3
[ 0.669297] hub 4-0:1.0: USB hub found
[ 0.669774] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 0.669856] hub 4-0:1.0: 1 port detected
[ 0.672818] sdhci: Secure Digital Host Controller Interface driver
[ 0.673370] sdhci: Copyright(c) Pierre Ossman
[ 0.673996] Synopsys Designware Multimedia Card Interface Driver
[ 0.675096] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.677609] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.685028] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.685053] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
[ 0.686515] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687155] usb usb6: Product: Generic Platform OHCI controller
[ 0.687697] usb usb6: Manufacturer: Linux 6.5.1-dwc3test ohci_hcd
[ 0.688238] usb usb6: SerialNumber: fe3e0000.usb
[ 0.689039] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.689463] hub 6-0:1.0: USB hub found
[ 0.690160] hub 6-0:1.0: 1 port detected
[ 0.697369] watchdog: Delayed init of the lockup detector failed: -19
[ 0.697968] watchdog: Hard watchdog permanently disabled
[ 0.701713] zswap: loaded using pool lz4/z3fold
[ 0.867444] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 1.062616] usb 3-1: New USB device found, idVendor=0411, idProduct=0111, bcdDevice= 1.00
[ 1.063371] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.064037] usb 3-1: Product: USB Flash Disk
[ 1.064436] usb 3-1: Manufacturer: BUFFALO
[ 1.064808] usb 3-1: SerialNumber: 07B31F089445408A
[ 1.067940] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1.069907] scsi host0: usb-storage 3-1:1.0
[ 1.634865] usb 8-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.651380] usb 8-1: New USB device found, idVendor=0846, idProduct=9053, bcdDevice= 1.00
[ 1.652163] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.652814] usb 8-1: Product: A6210
[ 1.653133] usb 8-1: Manufacturer: NETGEAR
[ 1.653514] usb 8-1: SerialNumber: 100
[ 1.928402] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.929003] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.959582] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 1.960282] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[ 1.960923] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 1.961073] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[ 1.961711] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 1.963007] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 1.963189] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 1.963606] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 65,32 bit host data width,256 deep fifo
[ 1.965433] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 1.965946] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[ 1.966558] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 1.967051] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[ 1.967672] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[ 1.968558] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[ 1.969205] pci 0000:00:00.0: supports D1
[ 1.969576] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 1.974928] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.975847] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 1.976458] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[ 1.977085] pci 0000:01:00.0: reg 0x10: [io size 0x0100]
[ 1.977650] pci 0000:01:00.0: reg 0x18: [mem 0xfa004000-0xfa004fff 64bit]
[ 1.978301] pci 0000:01:00.0: reg 0x20: [mem 0xfa000000-0xfa003fff 64bit]
[ 1.978627] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.978956] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[ 1.980485] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 1.981463] pci 0000:01:00.0: supports D1 D2
[ 1.981847] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.986549] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[ 1.987164] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[ 1.987807] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64bit]
[ 1.988514] pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64bit]
[ 1.989200] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100]
[ 1.989767] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100]
[ 1.990355] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.990810] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 1.991634] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.992478] pcieport 0000:00:00.0: PME: Signaling with IRQ 70
[ 1.993350] pcieport 0000:00:00.0: AER: enabled with IRQ 70
[ 1.997069] clk: Disabling unused clocks
[ 1.998377] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 2.000301] Freeing unused kernel memory: 2112K
[ 2.035157] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.036599] mmc1: new high speed SDHC card at address b368
[ 2.039702] mmcblk1: mmc1:b368 USD 7.47 GiB
[ 2.052557] mmcblk1: p1
[ 2.063325] Checked W+X mappings: passed, no W+X pages found
[ 2.063855] rodata_test: all tests were successful
[ 2.064288] Run /sbin/init as init process
[ 2.064666] with arguments:
[ 2.064674] /sbin/init
[ 2.064681] with environment:
[ 2.064687] HOME=/
[ 2.064694] TERM=linux
[ 2.089057] scsi 0:0:0:0: Direct-Access BUFFALO USB Flash Disk 3.10 PQ: 0 ANSI: 0 CCS
[ 2.090804] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.091915] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 2.093361] sd 0:0:0:0: [sda] Write Protect is off
[ 2.093374] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 2.094811] sd 0:0:0:0: [sda] No Caching mode page found
[ 2.095294] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 2.112099] sda: sda1
[ 2.112890] sd 0:0:0:0: [sda] Attached SCSI removable disk
^ permalink raw reply [flat|nested] 8+ messages in thread