public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Biju Das <biju.das.au@gmail.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: Re: [PATCH v3 2/5] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables
Date: Fri, 8 Sep 2023 11:48:19 +0300	[thread overview]
Message-ID: <ZPrf07OpMD4iKVI+@kuha.fi.intel.com> (raw)
In-Reply-To: <20230906080619.36930-3-biju.das.jz@bp.renesas.com>

On Wed, Sep 06, 2023 at 09:06:16AM +0100, Biju Das wrote:
> Currently did varaible is used for HW differences between the devices which
> complicates the code by adding checks.
> 
> Therefore it is better to convert enum->pointer for data match and extend
> match support for both ID and OF tables by using i2c_get_match_data().
> 
> Add struct rt1711h_chip_info with did variable and replace did->info in
> struct rt1711h_chip. Later patch will add more hw differences to
> struct rt1711h_chip_info and avoid checking did for HW differences.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
> v2->v3:
>  * Added Rb tag from Andy.
> v1->v2:
>  * Updated commit description.
> ---
>  drivers/usb/typec/tcpm/tcpci_rt1711h.c | 30 ++++++++++++++++++--------
>  1 file changed, 21 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> index 6146bca8e55f..2b7258d3cb4e 100644
> --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> @@ -51,13 +51,17 @@
>  /* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
>  #define BMCIO_RXDZEN	BIT(0)
>  
> +struct rt1711h_chip_info {
> +	u16 did;
> +};
> +
>  struct rt1711h_chip {
>  	struct tcpci_data data;
>  	struct tcpci *tcpci;
>  	struct device *dev;
>  	struct regulator *vbus;
> +	const struct rt1711h_chip_info *info;
>  	bool src_en;
> -	u16 did;
>  };
>  
>  static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
> @@ -105,7 +109,7 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
>  		return ret;
>  
>  	/* Enable PD30 extended message for RT1715 */
> -	if (chip->did == RT1715_DID) {
> +	if (chip->info->did == RT1715_DID) {
>  		ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
>  					 RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
>  		if (ret < 0)
> @@ -200,7 +204,7 @@ static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
>  	if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
>  	    (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
>  		rxdz_en = BMCIO_RXDZEN;
> -		if (chip->did == RT1715_DID)
> +		if (chip->info->did == RT1715_DID)
>  			rxdz_sel = RT1711H_BMCIO_RXDZSEL;
>  		else
>  			rxdz_sel = 0;
> @@ -319,7 +323,7 @@ static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *c
>  	ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
>  	if (ret < 0)
>  		return ret;
> -	if (ret != chip->did) {
> +	if (ret != chip->info->did) {
>  		dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
>  		return -ENODEV;
>  	}
> @@ -336,7 +340,7 @@ static int rt1711h_probe(struct i2c_client *client)
>  	if (!chip)
>  		return -ENOMEM;
>  
> -	chip->did = (size_t)device_get_match_data(&client->dev);
> +	chip->info = i2c_get_match_data(client);
>  
>  	ret = rt1711h_check_revision(client, chip);
>  	if (ret < 0) {
> @@ -391,17 +395,25 @@ static void rt1711h_remove(struct i2c_client *client)
>  	tcpci_unregister_port(chip->tcpci);
>  }
>  
> +static const struct rt1711h_chip_info rt1711h = {
> +	.did = RT1711H_DID,
> +};
> +
> +static const struct rt1711h_chip_info rt1715 = {
> +	.did = RT1715_DID,
> +};
> +
>  static const struct i2c_device_id rt1711h_id[] = {
> -	{ "rt1711h", 0 },
> -	{ "rt1715", 0 },
> +	{ "rt1711h", (kernel_ulong_t)&rt1711h },
> +	{ "rt1715", (kernel_ulong_t)&rt1715 },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(i2c, rt1711h_id);
>  
>  #ifdef CONFIG_OF
>  static const struct of_device_id rt1711h_of_match[] = {
> -	{ .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
> -	{ .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
> +	{ .compatible = "richtek,rt1711h", .data = &rt1711h },
> +	{ .compatible = "richtek,rt1715", .data = &rt1715 },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, rt1711h_of_match);
> -- 
> 2.25.1

-- 
heikki

  reply	other threads:[~2023-09-08  8:48 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-06  8:06 [PATCH v3 0/5] Match data improvements for rt1711h driver Biju Das
2023-09-06  8:06 ` [PATCH v3 1/5] usb: typec: tcpci_rt1711h: Remove trailing comma in the terminator entry for OF table Biju Das
2023-09-08  8:20   ` Heikki Krogerus
2023-09-06  8:06 ` [PATCH v3 2/5] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables Biju Das
2023-09-08  8:48   ` Heikki Krogerus [this message]
2023-09-06  8:06 ` [PATCH v3 3/5] usb: typec: tcpci_rt1711h: Add rxdz_sel variable to struct rt1711h_chip_info Biju Das
2023-09-08  8:49   ` Heikki Krogerus
2023-09-06  8:06 ` [PATCH v3 4/5] usb: typec: tcpci_rt1711h: Add enable_pd30_extended_message " Biju Das
2023-09-08 10:34   ` Heikki Krogerus
2023-09-06  8:06 ` [PATCH v3 5/5] usb: typec: tcpci_rt1711h: Drop CONFIG_OF ifdeffery Biju Das
2023-09-08 10:40   ` Heikki Krogerus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZPrf07OpMD4iKVI+@kuha.fi.intel.com \
    --to=heikki.krogerus@linux.intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=biju.das.au@gmail.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox