linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chao Gao <chao.gao@intel.com>
To: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Yang Weijiang <weijiang.yang@intel.com>, <seanjc@google.com>,
	<pbonzini@redhat.com>, <dave.hansen@intel.com>,
	<kvm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<peterz@infradead.org>, <rick.p.edgecombe@intel.com>,
	<john.allen@amd.com>
Subject: Re: [PATCH v7 21/26] KVM: x86: Save and reload SSP to/from SMRAM
Date: Fri, 1 Dec 2023 10:23:01 +0800	[thread overview]
Message-ID: <ZWlDhYBYGiX7ir4X@chao-email> (raw)
In-Reply-To: <d2be8a787969b76f71194ce65bd6f35426b60dcc.camel@redhat.com>

On Thu, Nov 30, 2023 at 07:42:44PM +0200, Maxim Levitsky wrote:
>On Fri, 2023-11-24 at 00:53 -0500, Yang Weijiang wrote:
>> Save CET SSP to SMRAM on SMI and reload it on RSM. KVM emulates HW arch
>> behavior when guest enters/leaves SMM mode,i.e., save registers to SMRAM
>> at the entry of SMM and reload them at the exit to SMM. Per SDM, SSP is
>> one of such registers on 64bit Arch, so add the support for SSP.
>> 
>> Suggested-by: Sean Christopherson <seanjc@google.com>
>> Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
>> ---
>>  arch/x86/kvm/smm.c | 8 ++++++++
>>  arch/x86/kvm/smm.h | 2 +-
>>  2 files changed, 9 insertions(+), 1 deletion(-)
>> 
>> diff --git a/arch/x86/kvm/smm.c b/arch/x86/kvm/smm.c
>> index 45c855389ea7..7aac9c54c353 100644
>> --- a/arch/x86/kvm/smm.c
>> +++ b/arch/x86/kvm/smm.c
>> @@ -275,6 +275,10 @@ static void enter_smm_save_state_64(struct kvm_vcpu *vcpu,
>>  	enter_smm_save_seg_64(vcpu, &smram->gs, VCPU_SREG_GS);
>>  
>>  	smram->int_shadow = static_call(kvm_x86_get_interrupt_shadow)(vcpu);
>> +
>> +	if (guest_can_use(vcpu, X86_FEATURE_SHSTK))
>> +		KVM_BUG_ON(kvm_msr_read(vcpu, MSR_KVM_SSP, &smram->ssp),
>> +			   vcpu->kvm);
>>  }
>>  #endif
>>  
>> @@ -564,6 +568,10 @@ static int rsm_load_state_64(struct x86_emulate_ctxt *ctxt,
>>  	static_call(kvm_x86_set_interrupt_shadow)(vcpu, 0);
>>  	ctxt->interruptibility = (u8)smstate->int_shadow;
>>  
>> +	if (guest_can_use(vcpu, X86_FEATURE_SHSTK))
>> +		KVM_BUG_ON(kvm_msr_write(vcpu, MSR_KVM_SSP, smstate->ssp),
>> +			   vcpu->kvm);
>> +
>>  	return X86EMUL_CONTINUE;
>>  }
>>  #endif
>> diff --git a/arch/x86/kvm/smm.h b/arch/x86/kvm/smm.h
>> index a1cf2ac5bd78..1e2a3e18207f 100644
>> --- a/arch/x86/kvm/smm.h
>> +++ b/arch/x86/kvm/smm.h
>> @@ -116,8 +116,8 @@ struct kvm_smram_state_64 {
>>  	u32 smbase;
>>  	u32 reserved4[5];
>>  
>> -	/* ssp and svm_* fields below are not implemented by KVM */
>>  	u64 ssp;
>> +	/* svm_* fields below are not implemented by KVM */
>>  	u64 svm_guest_pat;
>>  	u64 svm_host_efer;
>>  	u64 svm_host_cr4;
>
>
>My review feedback from the previous patch series still applies, and I don't
>know why it was not addressed/replied to:
>
>I still think that it is worth it to have a check that CET is not enabled in
>enter_smm_save_state_32 which is called for pure 32 bit guests (guests that don't
>have X86_FEATURE_LM enabled)

can KVM just reject a KVM_SET_CPUID ioctl which attempts to expose shadow stack
(or even any CET feature) to 32-bit guest in the first place? I think it is simpler.

  reply	other threads:[~2023-12-01  2:23 UTC|newest]

Thread overview: 104+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-24  5:53 [PATCH v7 00/26] Enable CET Virtualization Yang Weijiang
2023-11-24  5:53 ` [PATCH v7 01/26] x86/fpu/xstate: Always preserve non-user xfeatures/flags in __state_perm Yang Weijiang
2023-11-30 17:24   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 02/26] x86/fpu/xstate: Refine CET user xstate bit enabling Yang Weijiang
2023-11-24  9:40   ` Peter Zijlstra
2023-11-27  2:55     ` Yang, Weijiang
2023-11-28  1:31     ` Edgecombe, Rick P
2023-11-28  8:50       ` Peter Zijlstra
2023-11-28  1:31   ` Edgecombe, Rick P
2023-11-28  7:52     ` Yang, Weijiang
2023-11-30 17:26   ` Maxim Levitsky
2023-12-01  6:51     ` Yang, Weijiang
2023-12-05  9:53       ` Maxim Levitsky
2023-12-06  1:03         ` Yang, Weijiang
2023-12-06 15:57           ` Maxim Levitsky
2023-12-08 14:57             ` Yang, Weijiang
2023-12-08 15:15               ` Maxim Levitsky
2023-12-13  9:30                 ` Yang, Weijiang
2023-12-13 13:31                   ` Maxim Levitsky
2023-12-13 17:01                   ` Chang S. Bae
2023-12-14  3:12                     ` Yang, Weijiang
2023-11-24  5:53 ` [PATCH v7 03/26] x86/fpu/xstate: Add CET supervisor mode state support Yang Weijiang
2023-11-24  9:45   ` Peter Zijlstra
2023-11-27  4:06     ` Yang, Weijiang
2023-11-28  1:34   ` Edgecombe, Rick P
2023-11-30 17:27   ` Maxim Levitsky
2023-12-01  7:01     ` Yang, Weijiang
2023-12-05  9:53       ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 04/26] x86/fpu/xstate: Introduce XFEATURE_MASK_KERNEL_DYNAMIC xfeature set Yang Weijiang
2023-11-28  1:46   ` Edgecombe, Rick P
2023-11-28  8:00     ` Yang, Weijiang
2023-11-30 17:33   ` Maxim Levitsky
2023-12-01  7:49     ` Yang, Weijiang
2023-12-05  9:55       ` Maxim Levitsky
2023-12-06  3:00         ` Yang, Weijiang
2023-12-06 16:11           ` Maxim Levitsky
2023-12-08 15:57             ` Yang, Weijiang
2023-11-24  5:53 ` [PATCH v7 05/26] x86/fpu/xstate: Introduce fpu_guest_cfg for guest FPU configuration Yang Weijiang
2023-11-28 14:58   ` Edgecombe, Rick P
2023-11-29 14:12     ` Yang, Weijiang
2023-11-29 17:08       ` Edgecombe, Rick P
2023-11-30 13:28         ` Yang, Weijiang
2023-11-30 17:29     ` Maxim Levitsky
2023-11-30 18:02       ` Edgecombe, Rick P
2023-11-30 17:29   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 06/26] x86/fpu/xstate: Create guest fpstate with guest specific config Yang Weijiang
2023-11-28 15:19   ` Edgecombe, Rick P
2023-11-29 14:16     ` Yang, Weijiang
2023-11-30 17:36   ` Maxim Levitsky
2023-12-01  8:36     ` Yang, Weijiang
2023-12-05  9:57       ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 07/26] x86/fpu/xstate: Warn if kernel dynamic xfeatures detected in normal fpstate Yang Weijiang
2023-11-28 15:25   ` Edgecombe, Rick P
2023-11-29 14:18     ` Yang, Weijiang
2023-11-24  5:53 ` [PATCH v7 08/26] KVM: x86: Rework cpuid_get_supported_xcr0() to operate on vCPU data Yang Weijiang
2023-11-24  5:53 ` [PATCH v7 09/26] KVM: x86: Rename kvm_{g,s}et_msr() to menifest emulation operations Yang Weijiang
2023-11-30 17:36   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 10/26] KVM: x86: Refine xsave-managed guest register/MSR reset handling Yang Weijiang
2023-11-30 17:36   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 11/26] KVM: x86: Add kvm_msr_{read,write}() helpers Yang Weijiang
2023-11-30 17:37   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 12/26] KVM: x86: Report XSS as to-be-saved if there are supported features Yang Weijiang
2023-11-24  5:53 ` [PATCH v7 13/26] KVM: x86: Refresh CPUID on write to guest MSR_IA32_XSS Yang Weijiang
2023-11-30 17:37   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 14/26] KVM: x86: Initialize kvm_caps.supported_xss Yang Weijiang
2023-11-24  5:53 ` [PATCH v7 15/26] KVM: x86: Load guest FPU state when access XSAVE-managed MSRs Yang Weijiang
2023-11-30 17:38   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 16/26] KVM: x86: Add fault checks for guest CR4.CET setting Yang Weijiang
2023-11-24  5:53 ` [PATCH v7 17/26] KVM: x86: Report KVM supported CET MSRs as to-be-saved Yang Weijiang
2023-11-30 17:40   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 18/26] KVM: VMX: Introduce CET VMCS fields and control bits Yang Weijiang
2023-11-24  5:53 ` [PATCH v7 19/26] KVM: x86: Use KVM-governed feature framework to track "SHSTK/IBT enabled" Yang Weijiang
2023-11-30 17:40   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 20/26] KVM: VMX: Emulate read and write to CET MSRs Yang Weijiang
2023-11-30 17:41   ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 21/26] KVM: x86: Save and reload SSP to/from SMRAM Yang Weijiang
2023-11-30 17:42   ` Maxim Levitsky
2023-12-01  2:23     ` Chao Gao [this message]
2023-12-04  0:45       ` Yang, Weijiang
2023-12-05 10:02         ` Maxim Levitsky
2023-12-01  8:55     ` Yang, Weijiang
2023-11-24  5:53 ` [PATCH v7 22/26] KVM: VMX: Set up interception for CET MSRs Yang Weijiang
2023-11-30 17:44   ` Maxim Levitsky
2023-12-01  6:33     ` Chao Gao
2023-12-05 10:04       ` Maxim Levitsky
2023-12-01  9:45     ` Yang, Weijiang
2023-12-05 10:07       ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 23/26] KVM: VMX: Set host constant supervisor states to VMCS fields Yang Weijiang
2023-11-24  5:53 ` [PATCH v7 24/26] KVM: x86: Enable CET virtualization for VMX and advertise to userspace Yang Weijiang
2023-11-30 17:46   ` Maxim Levitsky
2023-12-01 16:15     ` Yang, Weijiang
2023-12-05 10:07       ` Maxim Levitsky
2023-11-24  5:53 ` [PATCH v7 25/26] KVM: nVMX: Introduce new VMX_BASIC bit for event error_code delivery to L1 Yang Weijiang
2023-11-24  5:53 ` [PATCH v7 26/26] KVM: nVMX: Enable CET support for nested guest Yang Weijiang
2023-11-30 17:53   ` Maxim Levitsky
2023-12-04  8:50     ` Yang, Weijiang
2023-12-05 10:12       ` Maxim Levitsky
2023-12-06  9:22         ` Yang, Weijiang
2023-12-06 17:24           ` Maxim Levitsky
2023-12-08 15:15             ` Yang, Weijiang
2023-12-08 15:22               ` Maxim Levitsky
2023-12-12  8:56                 ` Yang, Weijiang
2023-12-12 11:09                   ` Maxim Levitsky
2023-12-15  2:29 ` [PATCH v7 00/26] Enable CET Virtualization Yang, Weijiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZWlDhYBYGiX7ir4X@chao-email \
    --to=chao.gao@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=john.allen@amd.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peterz@infradead.org \
    --cc=rick.p.edgecombe@intel.com \
    --cc=seanjc@google.com \
    --cc=weijiang.yang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).