public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Marcus Folkesson <marcus.folkesson@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Kent Gustavsson <kent@minoris.se>,
	Lars-Peter Clausen <lars@metafoo.de>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] iio: adc: mcp3911: simplify code with guard macro
Date: Sun, 10 Dec 2023 14:44:40 +0100	[thread overview]
Message-ID: <ZXXAyEkA55MFw5iH@gmail.com> (raw)
In-Reply-To: <20231210113632.7880e730@jic23-huawei>

[-- Attachment #1: Type: text/plain, Size: 2928 bytes --]

On Sun, Dec 10, 2023 at 11:36:32AM +0000, Jonathan Cameron wrote:
> On Wed, 06 Dec 2023 19:39:04 +0100
> Marcus Folkesson <marcus.folkesson@gmail.com> wrote:
> 
> > Use the guard(mutex) macro for handle mutex lock/unlocks.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> Various changes inline - most are focused around simplifying the
> path for any given flow through the code.
> 
> Rather than going for a v5 - I've applied this with the following diff on top
> diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
> index dfcb6cb7570f..7a32e7a1be9d 100644
> --- a/drivers/iio/adc/mcp3911.c
> +++ b/drivers/iio/adc/mcp3911.c
> @@ -317,7 +317,7 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
>                             int *val2, long mask)
>  {
>         struct mcp3911 *adc = iio_priv(indio_dev);
> -       int ret = -EINVAL;
> +       int ret;
>  
>         guard(mutex)(&adc->lock);
>         switch (mask) {
> @@ -331,17 +331,23 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
>                 return IIO_VAL_INT;
>         case IIO_CHAN_INFO_OFFSET:
>                 ret = adc->chip->get_offset(adc, channel->channel, val);
> -               return (ret) ? ret : IIO_VAL_INT;
> +               if (ret)
> +                       return ret;
> +
> +               return IIO_VAL_INT;
>         case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
>                 ret = adc->chip->get_osr(adc, val);
> -               return (ret) ? ret : IIO_VAL_INT;
> +               if (ret)
> +                       return ret;
> +
> +               return IIO_VAL_INT;
>         case IIO_CHAN_INFO_SCALE:
>                 *val = mcp3911_scale_table[ilog2(adc->gain[channel->channel])][0];
>                 *val2 = mcp3911_scale_table[ilog2(adc->gain[channel->channel])][1];
>                 return IIO_VAL_INT_PLUS_NANO;
> +       default:
> +               return -EINVAL;
>         }
> -
> -       return ret;
>  }
>  
>  static int mcp3911_write_raw(struct iio_dev *indio_dev,
> @@ -361,7 +367,7 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
>                                 return adc->chip->set_scale(adc, channel->channel, i);
>                         }
>                 }
> -               break;
> +               return -EINVAL;
>         case IIO_CHAN_INFO_OFFSET:
>                 if (val2 != 0)
>                         return -EINVAL;
> @@ -373,9 +379,10 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
>                                 return adc->chip->set_osr(adc, i);
>                         }
>                 }
> -               break;
> +               return -EINVAL;
> +       default:
> +               return -EINVAL;
>         }
> -       return -EINVAL;
>  }
> 
> hope that's ok with you!

Thank you Jonathan

Best regards
Marcus Folkesson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

      reply	other threads:[~2023-12-10 13:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-06 18:39 [PATCH v4] iio: adc: mcp3911: simplify code with guard macro Marcus Folkesson
2023-12-10 11:36 ` Jonathan Cameron
2023-12-10 13:44   ` Marcus Folkesson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZXXAyEkA55MFw5iH@gmail.com \
    --to=marcus.folkesson@gmail.com \
    --cc=jic23@kernel.org \
    --cc=kent@minoris.se \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox