Re: [PATCH] mmc: rpmb: do not force a retune before RPMB switch

["Jorge Ramirez-Ortiz, Foundries" <jorge@foundries.io>]

On 06/12/23 11:00:47, Jorge Ramirez-Ortiz, Foundries wrote:
> On 06/12/23 07:02:43, Avri Altman wrote:
> > >
> > > On 4/12/23 17:01, Jorge Ramirez-Ortiz wrote:
> > > > Requesting a retune before switching to the RPMB partition has been
> > > > observed to cause CRC errors on the RPMB reads (-EILSEQ).
> > >
> > > There are still 2 concerns:
> > > 1) We don't really know the root cause.  Have you determined if here are
> > > CRC errors in the main partition also?
>
> right, and I don't disagree with that.
>
> As a test I created a 4GB file from /dev/random which I then copied
> several times (dd if= ....)
>
> root@uz3cg-dwg-sec:/sys/kernel/debug/mmc0# cat err_stats
> # Command Timeout Occurred:      0
> # Command CRC Errors Occurred:   0
> # Data Timeout Occurred:         0
> # Data CRC Errors Occurred:      0
> # Auto-Cmd Error Occurred:       0
> # ADMA Error Occurred:   0
> # Tuning Error Occurred:         0
> # CMDQ RED Errors:       0
> # CMDQ GCE Errors:       0
> # CMDQ ICCE Errors:      0
> # Request Timedout:      0
> # CMDQ Request Timedout:         0
> # ICE Config Errors:     0
> # Controller Timedout errors:    0
> # Unexpected IRQ errors:         0
>
> However as soon as I access RPMB and fails (it takes just a few tries) I see:
>
> I/TC: RPMB: Using generated key
> [   86.902118] sdhci-arasan ff160000.mmc: __mmc_blk_ioctl_cmd: data error -84
> E/TC:? 0
> E/TC:? 0 TA panicked with code 0xffff0000
> E/LD:  Status of TA 22250a54-0bf1-48fe-8002-7b20f1c9c9b1
> E/LD:   arch: aarch64
> E/LD:  region  0: va 0xc0004000 pa 0x7e200000 size 0x002000 flags rw-s (ldelf)
> E/LD:  region  1: va 0xc0006000 pa 0x7e202000 size 0x008000 flags r-xs (ldelf)
> E/LD:  region  2: va 0xc000e000 pa 0x7e20a000 size 0x001000 flags rw-s (ldelf)
> E/LD:  region  3: va 0xc000f000 pa 0x7e20b000 size 0x004000 flags rw-s (ldelf)
> E/LD:  region  4: va 0xc0013000 pa 0x7e20f000 size 0x001000 flags r--s
> E/LD:  region  5: va 0xc0014000 pa 0x7e22c000 size 0x005000 flags rw-s (stack)
> E/LD:  region  6: va 0xc0019000 pa 0x818ea9ba8 size 0x002000 flags rw-- (param)
> E/LD:  region  7: va 0xc001b000 pa 0x818e97ba8 size 0x001000 flags rw-- (param)
> E/LD:  region  8: va 0xc004f000 pa 0x00001000 size 0x014000 flags r-xs [0]
> E/LD:  region  9: va 0xc0063000 pa 0x00015000 size 0x008000 flags rw-s [0]
> E/LD:   [0] 22250a54-0bf1-48fe-8002-7b20f1c9c9b1 @ 0xc004f000
> E/LD:  Call stack:
> E/LD:   0xc0051a14
> E/LD:   0xc004f31c
> E/LD:   0xc0052d40
> E/LD:   0xc004f624
>
> root@uz3cg-dwg-sec:/var/rootdirs/home/fio# cat /sys/kernel/debug/mmc0/err_stats
> # Command Timeout Occurred:      0
> # Command CRC Errors Occurred:   0
> # Data Timeout Occurred:         0
> # Data CRC Errors Occurred:      1
> # Auto-Cmd Error Occurred:       0
> # ADMA Error Occurred:   0
> # Tuning Error Occurred:         0
> # CMDQ RED Errors:       0
> # CMDQ GCE Errors:       0
> # CMDQ ICCE Errors:      0
> # Request Timedout:      0
> # CMDQ Request Timedout:         0
> # ICE Config Errors:     0
> # Controller Timedout errors:    0
> # Unexpected IRQ errors:         0
>
> > > 2) Forcing this on everyone
> > >
> > > The original idea was that because re-tuning cannot be done in RPMB, the
> > > need to re-rune in RPMB could be avoided by always re-tuning before
> > > switching to RPMB and then switching straight back. IIRC re-tuning should
> > > guarantee at least 4MB more I/O without issue.
> > Performance is hardly an issue in the context of RPMB access -
> > For most cases it’s a single frame.
>
> Yes, the security use case typically stores hashes, variables
> (bootcount, upgrade_available, versions, that sort of thing) and
> certificates in RPMB.
>
> Since you mentioned, I am seeing that tuning before switching to RPMB
> has an impact on performance. As a practical test, just reading a 6 byte
> variable incurs in 50ms penalty in kernel space due to the need to
> retune 5 times. Not great since the request is coming from a Trusted
> Application via OP-TEE through the supplicant meaning this TEE thread
> (they are statically allocated CFG_NUM_THREADS) will be reserved for
> quite a bit of time.
>
> Roughly:
> TA --> OP-TEE (core) --> TEE-supplicant --> Kernel (>50ms) --> OP-TEE --> TA

To add more detail to the timing above, when using RPMB, OP-TEE stores
the secure filesystem on RPMB as well, so accessing one of the variables
stored in the filesystem consists on a number (~5) of individual RPMB
requests (each one forcing a retune, each retune taking around 10ms).

BTW, I also tried delaying the timing between those consecutive retunes
(up to 1 second), but the issue still persisted.

>
> Adrian, I couldn't find the original performance justification for
> enabling this feature globally. At which point do you think it becomes
> beneficial to retune before accessing RPMB?

How should we proceed with this patch then? can it be merged as I
proposed? should I rewrite it differently? not sure what is next

TIA
Jorge