From: Vinod Koul <vkoul@kernel.org>
To: Jan Kuliga <jankul@alatek.krakow.pl>
Cc: lizhi.hou@amd.com, brian.xu@amd.com, raj.kumar.rampelli@amd.com,
michal.simek@amd.com, dmaengine@vger.kernel.org,
linux-kernel@vger.kernel.org, miquel.raynal@bootlin.com
Subject: Re: [FIXED PATCH v4 6/8] dmaengine: xilinx: xdma: Add transfer error reporting
Date: Mon, 11 Dec 2023 16:24:40 +0530 [thread overview]
Message-ID: <ZXbqcGSL6oVD8YDS@matsya> (raw)
In-Reply-To: <20231208220802.56458-1-jankul@alatek.krakow.pl>
On 08-12-23, 23:08, Jan Kuliga wrote:
> Extend the capability of transfer status reporting. Introduce error flag,
> which allows to report error in case of a interrupt-reported error
> condition.
Pls post the updated series, noting changes from last rev
>
> Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
> ---
> drivers/dma/xilinx/xdma.c | 26 +++++++++++++++-----------
> 1 file changed, 15 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
> index d1bc36133a45..a7cd378b7e9a 100644
> --- a/drivers/dma/xilinx/xdma.c
> +++ b/drivers/dma/xilinx/xdma.c
> @@ -85,6 +85,7 @@ struct xdma_chan {
> * @cyclic: Cyclic transfer vs. scatter-gather
> * @periods: Number of periods in the cyclic transfer
> * @period_size: Size of a period in bytes in cyclic transfers
> + * @error: tx error flag
> */
> struct xdma_desc {
> struct virt_dma_desc vdesc;
> @@ -97,6 +98,7 @@ struct xdma_desc {
> bool cyclic;
> u32 periods;
> u32 period_size;
> + bool error;
> };
>
> #define XDMA_DEV_STATUS_REG_DMA BIT(0)
> @@ -274,6 +276,7 @@ xdma_alloc_desc(struct xdma_chan *chan, u32 desc_num, bool cyclic)
> sw_desc->chan = chan;
> sw_desc->desc_num = desc_num;
> sw_desc->cyclic = cyclic;
> + sw_desc->error = false;
> dblk_num = DIV_ROUND_UP(desc_num, XDMA_DESC_ADJACENT);
> sw_desc->desc_blocks = kcalloc(dblk_num, sizeof(*sw_desc->desc_blocks),
> GFP_NOWAIT);
> @@ -770,20 +773,20 @@ static enum dma_status xdma_tx_status(struct dma_chan *chan, dma_cookie_t cookie
> spin_lock_irqsave(&xdma_chan->vchan.lock, flags);
>
> vd = vchan_find_desc(&xdma_chan->vchan, cookie);
> - if (vd)
> - desc = to_xdma_desc(vd);
> - if (!desc || !desc->cyclic) {
> - spin_unlock_irqrestore(&xdma_chan->vchan.lock, flags);
> - return ret;
> - }
> -
> - period_idx = desc->completed_desc_num % desc->periods;
> - residue = (desc->periods - period_idx) * desc->period_size;
> + if (!vd)
> + goto out;
>
> + desc = to_xdma_desc(vd);
> + if (desc->error) {
> + ret = DMA_ERROR;
> + } else if (desc->cyclic) {
> + period_idx = desc->completed_desc_num % desc->periods;
> + residue = (desc->periods - period_idx) * desc->period_size;
> + dma_set_residue(state, residue);
> + }
> +out:
> spin_unlock_irqrestore(&xdma_chan->vchan.lock, flags);
>
> - dma_set_residue(state, residue);
> -
> return ret;
> }
>
> @@ -820,6 +823,7 @@ static irqreturn_t xdma_channel_isr(int irq, void *dev_id)
> st &= XDMA_CHAN_STATUS_MASK;
> if ((st & XDMA_CHAN_ERROR_MASK) ||
> !(st & (CHAN_CTRL_IE_DESC_COMPLETED | CHAN_CTRL_IE_DESC_STOPPED))) {
> + desc->error = true;
> xdma_err(xdev, "channel error, status register value: 0x%x", st);
> goto out;
> }
> --
> 2.34.1
--
~Vinod
next prev parent reply other threads:[~2023-12-11 10:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-08 13:48 [PATCH v4 0/8] Miscellaneous xdma driver enhancements Jan Kuliga
2023-12-08 13:49 ` [PATCH v4 1/8] dmaengine: xilinx: xdma: Get rid of unused code Jan Kuliga
2023-12-08 13:49 ` [PATCH v4 2/8] dmaengine: xilinx: xdma: Add necessary macro definitions Jan Kuliga
2023-12-08 13:49 ` [PATCH v4 3/8] dmaengine: xilinx: xdma: Ease dma_pool alignment requirements Jan Kuliga
2023-12-08 13:49 ` [PATCH v4 4/8] dmaengine: xilinx: xdma: Rework xdma_terminate_all() Jan Kuliga
2023-12-11 10:54 ` Vinod Koul
2023-12-18 11:52 ` Jan Kuliga
2023-12-08 13:49 ` [PATCH v4 5/8] dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr() Jan Kuliga
2023-12-08 13:49 ` [PATCH v4 6/8] dmaengine: xilinx: xdma: Add transfer error reporting Jan Kuliga
2023-12-08 21:06 ` Lizhi Hou
2023-12-08 22:08 ` [FIXED PATCH " Jan Kuliga
2023-12-11 10:54 ` Vinod Koul [this message]
2023-12-08 13:49 ` [PATCH v4 7/8] dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers Jan Kuliga
2023-12-08 13:49 ` [PATCH v4 8/8] dmaengine: xilinx: xdma: Introduce " Jan Kuliga
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZXbqcGSL6oVD8YDS@matsya \
--to=vkoul@kernel.org \
--cc=brian.xu@amd.com \
--cc=dmaengine@vger.kernel.org \
--cc=jankul@alatek.krakow.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=lizhi.hou@amd.com \
--cc=michal.simek@amd.com \
--cc=miquel.raynal@bootlin.com \
--cc=raj.kumar.rampelli@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox