Re: [PATCH v1 2/8] pinctrl: Add driver for the T-Head TH1520 SoC

[Andy Shevchenko <andy@kernel.org>]

On Fri, Dec 15, 2023 at 03:39:00PM +0100, Emil Renner Berthing wrote:
> Add pinctrl driver for the T-Head TH1520 RISC-V SoC.

...

+ array_size.h
+ bits.h
+ device.h

(and so on, please make sure you follow IWYU principle --
 "include what you use")

> +#include <linux/io.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>

> +#include <linux/of.h>

Can you use device property API instead?

(I briefly checked, all of the used of_ ones have the respective generic
 implementations either in fwnode_property_ or device_property_ namespace).

OTOH, it's used in xlate/map functions which have device_node as a parameter...

> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +#include <linux/spinlock.h>

...

> +#include "core.h"
> +#include "pinmux.h"
> +#include "pinconf.h"

All of them are needed?

...

> +static unsigned int th1520_padcfg_shift(unsigned int pin)
> +{
> +	return 16 * (pin & 0x1U);

BIT(0) ?

> +}

...

> +static unsigned int th1520_muxcfg_shift(unsigned int pin)
> +{
> +	return 4 * (pin & 0x7U);

GENMASK() ?

> +}

...

> +			return dev_err_probe(thp->pctl->dev, -EINVAL,
> +					     "no pins selected for %pOFn.%pOFn\n",
> +					     np, child);

> +			dev_err(thp->pctl->dev, "error parsing pin config of group %pOFn.%pOFn\n",
> +				np, child);

In the very same function you are using dev_err_probe(), please make sure
you use the same for all error messages as it will be a unified format
(in case of dev_err_probe() or if you explicitly do that with dev_err()
calls).

> +		}

...

> +static const struct pinctrl_ops th1520_pinctrl_ops = {
> +	.get_groups_count = th1520_pinctrl_get_groups_count,
> +	.get_group_name = th1520_pinctrl_get_group_name,
> +	.get_group_pins = th1520_pinctrl_get_group_pins,

> +	.pin_dbg_show = th1520_pin_dbg_show,

Is ifdeffery needed for this one?


> +	.dt_node_to_map = th1520_pinctrl_dt_node_to_map,
> +	.dt_free_map = th1520_pinctrl_dt_free_map,

Is ifdeffery needed for these two?

> +};

...

> +	mask = 0xfU << shift;
> +	value = ((uintptr_t)func->data & 0xfU) << shift;

GENMASK() in both cases.

> +	raw_spin_lock_irqsave(&thp->lock, flags);
> +	value |= readl_relaxed(muxcfg) & ~mask;

Instead of above, use the traditional pattern

	value = read()
	value = (value & ~mask) | (newval & mask);
	write()

where newval is defined with a proper type and you get rid of all those ugly
castings at once.

> +	writel_relaxed(value, muxcfg);
> +	raw_spin_unlock_irqrestore(&thp->lock, flags);

...

> +static u16 th1520_drive_strength_from_mA(u32 arg)
> +{
> +	u16 v;
> +
> +	for (v = 0; v < ARRAY_SIZE(th1520_drive_strength_in_mA) - 1; v++) {

You may drop -1 here AFAIU (see below).

> +		if (arg <= th1520_drive_strength_in_mA[v])
> +			break;

return directly.

> +	}

> +	return v;

return explicit value which will be robust against changes in the for-loop or
elsewhere in the code.

> +}

...

> +static int th1520_padcfg_rmw(struct th1520_pinctrl *thp, unsigned int pin,
> +			     u16 _mask, u16 _value)

Why not naming them without underscores?

> +{
> +	void __iomem *padcfg = th1520_padcfg(thp, pin);
> +	unsigned int shift = th1520_padcfg_shift(pin);

> +	u32 mask = (u32)_mask << shift;
> +	u32 value = (u32)_value << shift;

Oh, no castings, please.

> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&thp->lock, flags);

Use cleanup.h.

> +	value |= readl_relaxed(padcfg) & ~mask;
> +	writel_relaxed(value, padcfg);
> +	raw_spin_unlock_irqrestore(&thp->lock, flags);
> +	return 0;
> +}

...

> +#define PIN_CONFIG_THEAD_STRONG_PULL_UP	(PIN_CONFIG_END + 1)

Oh, custom flag! Linus, what is the expected approach for custom flags like this?
I believe this is quite error prone.

...

> +	value = readl_relaxed(th1520_padcfg(thp, pin));
> +	value = (value >> th1520_padcfg_shift(pin)) & 0x3ffU;

GENMASK() and in many other places like this.

...

> +		enabled = value & TH1520_PADCFG_IE;
> +		arg = enabled;

Assigning boolean to integer... Hmm...

> +		break;
> +	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> +		enabled = value & TH1520_PADCFG_ST;
> +		arg = enabled;
> +		break;
> +	case PIN_CONFIG_SLEW_RATE:
> +		enabled = value & TH1520_PADCFG_SL;
> +		arg = enabled;
> +		break;

...

> +static int th1520_pinctrl_probe(struct platform_device *pdev)
> +{

	struct device *dev = &pdev->dev;

may give you some benefits.

> +	const struct th1520_padgroup *group = device_get_match_data(&pdev->dev);
> +	struct th1520_pinctrl *thp;
> +	int ret;
> +
> +	thp = devm_kzalloc(&pdev->dev, sizeof(*thp), GFP_KERNEL);
> +	if (!thp)
> +		return -ENOMEM;
> +
> +	thp->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(thp->base))
> +		return PTR_ERR(thp->base);
> +
> +	thp->desc.name = group->name;
> +	thp->desc.pins = group->pins;
> +	thp->desc.npins = group->npins;
> +	thp->desc.pctlops = &th1520_pinctrl_ops;
> +	thp->desc.pmxops = &th1520_pinmux_ops;
> +	thp->desc.confops = &th1520_pinconf_ops;
> +	thp->desc.owner = THIS_MODULE;
> +	thp->desc.num_custom_params = ARRAY_SIZE(th1520_pinconf_custom_params);
> +	thp->desc.custom_params = th1520_pinconf_custom_params;
> +	thp->desc.custom_conf_items = th1520_pinconf_custom_conf_items;
> +	mutex_init(&thp->mutex);
> +	raw_spin_lock_init(&thp->lock);
> +
> +	ret = devm_pinctrl_register_and_init(&pdev->dev, &thp->desc, thp, &thp->pctl);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "could not register pinctrl driver\n");
> +
> +	return pinctrl_enable(thp->pctl);
> +}

-- 
With Best Regards,
Andy Shevchenko