From: Johan Hovold <johan@kernel.org>
To: Peter Rosin <peda@axentia.se>
Cc: Johan Hovold <johan+linaro@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mux: suppress lookup errors for mux controls
Date: Mon, 14 Apr 2025 16:01:20 +0200 [thread overview]
Message-ID: <Z_0VMCmfnDZxd4GC@hovoldconsulting.com> (raw)
In-Reply-To: <c0f63b8a-7197-050a-ca01-a1050a2e287e@axentia.se>
On Mon, Apr 14, 2025 at 03:18:03PM +0200, Peter Rosin wrote:
> 2025-04-14 at 14:42, Johan Hovold wrote:
> > Since commit eec611d26f84 ("ASoC: codecs: wcd938x: add mux control
> > support for hp audio mux") we have drivers looking up mux controls that
> > are optional. This results in errors incorrectly being logged on
> > machines like the Lenovo ThinkPad X13s where the mux is missing:
> >
> > wcd938x_codec audio-codec: /audio-codec: failed to get mux-control (0)
> >
> > Suppress the error message when lookup of mux controls fails and make
> > sure to return -ENOENT consistently also when looking up controls by
> > name so that consumer drivers can easily determine how to proceed.
> >
> > Note that most current consumers already log mux lookup failures
> > themselves.
> >
> > Fixes: eec611d26f84 ("ASoC: codecs: wcd938x: add mux control support for hp audio mux")
> > Link: https://lore.kernel.org/lkml/Z-z_ZAyVBK5ui50k@hovoldconsulting.com/
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > --- a/drivers/mux/core.c
> > +++ b/drivers/mux/core.c
> > @@ -544,8 +544,13 @@ static struct mux_control *mux_get(struct device *dev, const char *mux_name,
> > index = of_property_match_string(np, "mux-control-names",
> > mux_name);
> > if (index < 0) {
> > - dev_err(dev, "mux controller '%s' not found\n",
> > - mux_name);
> > + if (!state && index == -EINVAL)
> > + index = -ENOENT;
>
> Why exclude states? For me, that's entirely random and inconsistent. If there's
> a reason to exclude them, I'd like to hear about it. If there is no reason and
> this is just defensive programming, then I'd like for someone to dig into it
> and either find a reason for the difference or clean up the inconsistency.
I only found one user of "mux states" and I'm still not quite sure why
there are two interfaces for looking up muxes. But my impression was
that if you need a mux set to a specific state and you even encode that
directly in DT, then there should be no need to support optional
resources.
After taking a closer look at the single consumer now, I see that it
already implements optional lookups itself and thus could benefit from
generalising this.
There's no other reason for why this could not be extended to "mux
states".
> I think the model of explicitly marking when you'd like a mux to be optional
> is a better and less fragile model. Who is to say that -EINVAL from some other
> call is, and will remain, a perfect match for the optional case you are aiming
> for?
-EINVAL is simply the error returned from the OF helpers when the name
properties are missing. I map that to -ENOENT for consistency with index
lookups (i.e. when the "mux-controls" property is missing) and that
error is much less likely to be returned for other reasons.
> Srinivas Kandagatla is looking into optional muxes as a side issue to
> exclusive muxes.
> https://lore.kernel.org/all/20250326154613.3735-1-srinivas.kandagatla@linaro.org/
The audio codec change introduces a de-facto regression so if you want
something different, we'll have to fix this in the codec driver directly
by checking for a "mux-controls" property before doing the lookup for
now (i.e. like is done in the TI driver looking up an optional "mux
state").
Johan
next prev parent reply other threads:[~2025-04-14 14:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-14 12:42 [PATCH] mux: suppress lookup errors for mux controls Johan Hovold
2025-04-14 13:18 ` Peter Rosin
2025-04-14 14:01 ` Johan Hovold [this message]
2025-04-14 14:35 ` Srinivas Kandagatla
2025-04-15 6:26 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z_0VMCmfnDZxd4GC@hovoldconsulting.com \
--to=johan@kernel.org \
--cc=broonie@kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=johan+linaro@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=srinivas.kandagatla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox