From: Andy Shevchenko <andy@kernel.org>
To: Ivan Vecera <ivecera@redhat.com>
Cc: netdev@vger.kernel.org,
Vadim Fedorenko <vadim.fedorenko@linux.dev>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Jiri Pirko <jiri@resnulli.us>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Prathosh Satish <Prathosh.Satish@microchip.com>,
Lee Jones <lee@kernel.org>, Kees Cook <kees@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Michal Schmidt <mschmidt@redhat.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hardening@vger.kernel.org
Subject: Re: [PATCH 00/28] Add Microchip ZL3073x support
Date: Mon, 7 Apr 2025 21:06:35 +0300 [thread overview]
Message-ID: <Z_QUKyEmtNcxlbTt@smile.fi.intel.com> (raw)
In-Reply-To: <20250407172836.1009461-1-ivecera@redhat.com>
On Mon, Apr 07, 2025 at 07:28:27PM +0200, Ivan Vecera wrote:
> This series adds support for Microchip Azurite DPLL/PTP/SyncE chip
> family. These chips provide DPLL and PTP functionality, so the series
> adds the common MFD driver that provides an access to the bus that can
> be either I2C or SPI. The second part of the series is DPLL driver that
> covers DPLL functionality. The PTP support will be added by separate
> series as well as flashing capability.
>
> All functionality was tested by myself and by Prathosh Satish on
> Microchip EDS2 development board with ZL30732 DPLL chip connected over
> I2C bus.
>
> Patch breakdown
> ===============
> Patch 1 - Basic support for I2C, SPI and regmap
Was enough to me to see that this need more work. Just take your time and do
internal review. It seems like one is missed. I believe you have a lot of
experienced kernel maintainers and contributors who can help you with that.
--
With Best Regards,
Andy Shevchenko
prev parent reply other threads:[~2025-04-07 18:06 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-07 17:28 [PATCH 00/28] Add Microchip ZL3073x support Ivan Vecera
2025-04-07 17:28 ` [PATCH 01/28] mfd: " Ivan Vecera
2025-04-07 17:53 ` Krzysztof Kozlowski
2025-04-09 6:31 ` Ivan Vecera
2025-04-07 18:05 ` Andy Shevchenko
2025-04-09 6:40 ` Ivan Vecera
2025-04-14 6:36 ` Andy Shevchenko
2025-04-14 11:39 ` Ivan Vecera
2025-04-14 11:52 ` Ivan Vecera
2025-04-14 13:55 ` Andy Shevchenko
2025-04-14 14:08 ` Ivan Vecera
2025-04-14 14:07 ` Ivan Vecera
2025-04-14 14:10 ` Andy Shevchenko
2025-04-14 14:13 ` Andy Shevchenko
2025-04-14 14:16 ` Andy Shevchenko
2025-04-14 14:53 ` Ivan Vecera
2025-04-14 17:09 ` Andy Shevchenko
2025-04-14 17:42 ` Ivan Vecera
2025-04-14 13:58 ` Andy Shevchenko
2025-04-07 17:28 ` [PATCH 02/28] mfd: zl3073x: Register itself as devlink device Ivan Vecera
2025-04-07 20:57 ` Andrew Lunn
2025-04-09 6:41 ` Ivan Vecera
2025-04-07 17:28 ` [PATCH 03/28] mfd: zl3073x: Add register access helpers Ivan Vecera
2025-04-07 21:03 ` Andrew Lunn
2025-04-09 6:42 ` Ivan Vecera
2025-04-07 17:28 ` [PATCH 04/28] mfd: zl3073x: Add macros for device registers access Ivan Vecera
2025-04-07 17:28 ` [PATCH 05/28] mfd: zl3073x: Add components versions register defs Ivan Vecera
2025-04-07 21:09 ` Andrew Lunn
2025-04-09 6:44 ` Ivan Vecera
2025-04-10 7:11 ` Krzysztof Kozlowski
2025-04-10 10:23 ` Ivan Vecera
2025-04-10 10:42 ` Krzysztof Kozlowski
2025-04-10 12:01 ` Ivan Vecera
2025-04-07 17:28 ` [PATCH 06/28] mfd: zl3073x: Implement devlink device info Ivan Vecera
2025-04-07 17:28 ` [PATCH 07/28] mfd: zl3073x: Add macro to wait for register value bits to be cleared Ivan Vecera
2025-04-07 17:28 ` [PATCH 08/28] mfd: zl3073x: Add functions to work with register mailboxes Ivan Vecera
2025-04-07 17:28 ` [PATCH 09/28] mfd: zl3073x: Add clock_id field Ivan Vecera
2025-04-07 17:31 ` [PATCH 10/28] lib: Allow modules to use strnchrnul Ivan Vecera
2025-04-07 17:50 ` Kees Cook
2025-04-07 17:31 ` [PATCH 11/28] mfd: zl3073x: Load mfg file into HW if it is present Ivan Vecera
2025-04-07 17:31 ` [PATCH 12/28] mfd: zl3073x: Fetch invariants during probe Ivan Vecera
2025-04-07 17:31 ` [PATCH 13/28] dpll: Add Microchip ZL3073x DPLL driver Ivan Vecera
2025-04-07 17:31 ` [PATCH 14/28] mfd: zl3073x: Register DPLL sub-device during init Ivan Vecera
2025-04-07 17:31 ` [PATCH 15/28] dt-bindings: dpll: Add device tree bindings for DPLL device and pin Ivan Vecera
2025-04-07 18:01 ` Krzysztof Kozlowski
2025-04-07 18:10 ` Krzysztof Kozlowski
2025-04-08 5:19 ` Michal Schmidt
2025-04-09 7:09 ` Ivan Vecera
2025-04-07 17:31 ` [PATCH 16/28] dt-bindings: dpll: Add support for Microchip Azurite chip family Ivan Vecera
2025-04-07 18:04 ` Krzysztof Kozlowski
2025-04-09 7:19 ` Ivan Vecera
2025-04-10 7:01 ` Krzysztof Kozlowski
2025-04-10 10:28 ` Ivan Vecera
2025-04-10 12:19 ` Krzysztof Kozlowski
2025-04-10 12:38 ` Ivan Vecera
2025-04-07 17:31 ` [PATCH 17/28] dpll: zl3073x: Read DPLL types from firmware Ivan Vecera
2025-04-07 17:31 ` [PATCH 18/28] dpll: zl3073x: Read optional pin properties " Ivan Vecera
2025-04-07 18:06 ` Krzysztof Kozlowski
2025-04-09 7:22 ` Ivan Vecera
2025-04-07 17:31 ` [PATCH 19/28] dpll: zl3073x: Implement input pin selection in manual mode Ivan Vecera
2025-04-07 17:32 ` [PATCH 20/28] dpll: zl3073x: Add support to get/set priority on input pins Ivan Vecera
2025-04-07 17:32 ` [PATCH 21/28] dpll: zl3073x: Implement input pin state setting in automatic mode Ivan Vecera
2025-04-07 17:32 ` [PATCH 22/28] dpll: zl3073x: Add support to get/set frequency on input pins Ivan Vecera
2025-04-07 17:32 ` [PATCH 23/28] dpll: zl3073x: Add support to get/set frequency on output pins Ivan Vecera
2025-04-07 17:32 ` [PATCH 24/28] dpll: zl3073x: Read pin supported frequencies from firmware Ivan Vecera
2025-04-07 17:32 ` [PATCH 25/28] dpll: zl3073x: Add support to get phase offset on input pins Ivan Vecera
2025-04-07 17:32 ` [PATCH 26/28] dpll: zl3073x: Add support to get/set phase adjust on pins Ivan Vecera
2025-04-07 17:33 ` [PATCH 27/28] dpll: zl3073x: Add support to get/set esync " Ivan Vecera
2025-04-07 17:33 ` [PATCH 28/28] dpll: zl3073x: Add support to get fractional frequency offset on input pins Ivan Vecera
2025-04-07 18:06 ` Andy Shevchenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z_QUKyEmtNcxlbTt@smile.fi.intel.com \
--to=andy@kernel.org \
--cc=Prathosh.Satish@microchip.com \
--cc=akpm@linux-foundation.org \
--cc=arkadiusz.kubalewski@intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ivecera@redhat.com \
--cc=jiri@resnulli.us \
--cc=kees@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mschmidt@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=robh@kernel.org \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox