public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: fan <nifan.cxl@gmail.com>
To: Ira Weiny <ira.weiny@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>,
	Jonathan Cameron <jonathan.cameron@huawei.com>,
	Dave Jiang <dave.jiang@intel.com>,
	Alison Schofield <alison.schofield@intel.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] cxl/pci: Skip irq features if MSI/MSI-X are not supported
Date: Fri, 12 Jan 2024 11:40:11 -0800	[thread overview]
Message-ID: <ZaGVm5tHXoTZd4Ad@debian> (raw)
In-Reply-To: <20240111-dont-fail-irq-v1-1-802c22a79ecb@intel.com>

On Thu, Jan 11, 2024 at 05:54:45PM -0800, Ira Weiny wrote:
> CXL 3.1 Section 3.1.1 states:
> 
> 	"A Function on a CXL device must not generate INTx messages if
> 	that Function participates in CXL.cache protocol or CXL.mem
> 	protocols."
> 
> The generic CXL memory driver only supports devices which use the
> CXL.mem protocol.  The current driver attempts to allocate MSI/MSI-X
> vectors in anticipation of their need for mailbox interrupts or event
> processing.  However, the above requirement does not require a device to
> support interrupts, only that they use MSI/MSI-X.  For example, a device
> may disable mailbox interrupts and be configured for firmware first
> event processing and function well with the driver.
> 
> Rather than fail device probe if interrupts are not supported; flag that
> irqs are not enabled and avoid features which require interrupts.
> Emit messages appropriate for the situation to aid in debugging should
> device behavior be unexpected due to a failure to allocate vectors.
> 
> Note that it is possible for a device to have host based event
> processing through polling.  However, the driver does not support
> polling and it is not anticipated to be required.  Leave that case to
> the future if such a device comes along.
> 
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>
> ---

Reviewed-by: Fan Ni <fan.ni@samsung.com>

> Changes in v1:
> - [djbw: remove persistent irq boolean]
> - [djbw: Simplify error messages]
> - [Alison: spell check]
> - [iweiny: test]
> - Link to RFC: https://lore.kernel.org/r/20240108-dont-fail-irq-v1-1-4407228debd2@intel.com
> ---
>  drivers/cxl/pci.c | 29 +++++++++++++++++++----------
>  1 file changed, 19 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index 0155fb66b580..bd12b97bb38e 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -381,7 +381,7 @@ static int cxl_pci_mbox_send(struct cxl_memdev_state *mds,
>  	return rc;
>  }
>  
> -static int cxl_pci_setup_mailbox(struct cxl_memdev_state *mds)
> +static int cxl_pci_setup_mailbox(struct cxl_memdev_state *mds, bool irq_avail)
>  {
>  	struct cxl_dev_state *cxlds = &mds->cxlds;
>  	const int cap = readl(cxlds->regs.mbox + CXLDEV_MBOX_CAPS_OFFSET);
> @@ -443,6 +443,11 @@ static int cxl_pci_setup_mailbox(struct cxl_memdev_state *mds)
>  	if (!(cap & CXLDEV_MBOX_CAP_BG_CMD_IRQ))
>  		return 0;
>  
> +	if (!irq_avail) {
> +		dev_err(cxlds->dev, "Mailbox irq enabled but no interrupt vectors.\n");
> +		return 0;
> +	}
> +
>  	msgnum = FIELD_GET(CXLDEV_MBOX_CAP_IRQ_MSGNUM_MASK, cap);
>  	irq = pci_irq_vector(to_pci_dev(cxlds->dev), msgnum);
>  	if (irq < 0)
> @@ -587,7 +592,7 @@ static int cxl_mem_alloc_event_buf(struct cxl_memdev_state *mds)
>  	return devm_add_action_or_reset(mds->cxlds.dev, free_event_buf, buf);
>  }
>  
> -static int cxl_alloc_irq_vectors(struct pci_dev *pdev)
> +static bool cxl_alloc_irq_vectors(struct pci_dev *pdev)
>  {
>  	int nvecs;
>  
> @@ -604,9 +609,9 @@ static int cxl_alloc_irq_vectors(struct pci_dev *pdev)
>  				      PCI_IRQ_MSIX | PCI_IRQ_MSI);
>  	if (nvecs < 1) {
>  		dev_dbg(&pdev->dev, "Failed to alloc irq vectors: %d\n", nvecs);
> -		return -ENXIO;
> +		return false;
>  	}
> -	return 0;
> +	return true;
>  }
>  
>  static irqreturn_t cxl_event_thread(int irq, void *id)
> @@ -742,7 +747,7 @@ static bool cxl_event_int_is_fw(u8 setting)
>  }
>  
>  static int cxl_event_config(struct pci_host_bridge *host_bridge,
> -			    struct cxl_memdev_state *mds)
> +			    struct cxl_memdev_state *mds, bool irq_avail)
>  {
>  	struct cxl_event_interrupt_policy policy;
>  	int rc;
> @@ -754,6 +759,11 @@ static int cxl_event_config(struct pci_host_bridge *host_bridge,
>  	if (!host_bridge->native_cxl_error)
>  		return 0;
>  
> +	if (!irq_avail) {
> +		dev_info(mds->cxlds.dev, "No interrupt vectors, no polling, skip event processing.\n");
> +		return 0;
> +	}
> +
>  	rc = cxl_mem_alloc_event_buf(mds);
>  	if (rc)
>  		return rc;
> @@ -788,6 +798,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	struct cxl_register_map map;
>  	struct cxl_memdev *cxlmd;
>  	int i, rc, pmu_count;
> +	bool irq_avail;
>  
>  	/*
>  	 * Double check the anonymous union trickery in struct cxl_regs
> @@ -845,11 +856,9 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	else
>  		dev_warn(&pdev->dev, "Media not active (%d)\n", rc);
>  
> -	rc = cxl_alloc_irq_vectors(pdev);
> -	if (rc)
> -		return rc;
> +	irq_avail = cxl_alloc_irq_vectors(pdev);
>  
> -	rc = cxl_pci_setup_mailbox(mds);
> +	rc = cxl_pci_setup_mailbox(mds, irq_avail);
>  	if (rc)
>  		return rc;
>  
> @@ -908,7 +917,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  		}
>  	}
>  
> -	rc = cxl_event_config(host_bridge, mds);
> +	rc = cxl_event_config(host_bridge, mds, irq_avail);
>  	if (rc)
>  		return rc;
>  
> 
> ---
> base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a
> change-id: 20240108-dont-fail-irq-a96310368f0f
> 
> Best regards,
> -- 
> Ira Weiny <ira.weiny@intel.com>
> 

  parent reply	other threads:[~2024-01-12 19:40 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-12  1:54 [PATCH] cxl/pci: Skip irq features if MSI/MSI-X are not supported Ira Weiny
2024-01-12 16:05 ` Dave Jiang
2024-01-12 17:42   ` Ira Weiny
2024-01-12 19:40 ` fan [this message]
2024-01-12 23:16 ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZaGVm5tHXoTZd4Ad@debian \
    --to=nifan.cxl@gmail.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox