From: Jaegeuk Kim <jaegeuk@kernel.org>
To: Wenjie <qwjhust@gmail.com>
Cc: chao@kernel.org, guoweichao@oppo.com,
linux-f2fs-devel@lists.sourceforge.net,
linux-kernel@vger.kernel.org, hustqwj@hust.edu.cn
Subject: Re: [PATCH v2] f2fs: fix max open zone constraints
Date: Fri, 26 Jan 2024 15:08:14 -0800 [thread overview]
Message-ID: <ZbQ7XmFpAMSXslkU@google.com> (raw)
In-Reply-To: <20240109035804.642-1-qwjhust@gmail.com>
On 01/09, Wenjie wrote:
> From: Wenjie Qi <qwjhust@gmail.com>
>
> 1. If the max active zones of zoned devices are less than
> the active logs of F2FS, the device may error due to
> insufficient zone resources when multiple active logs are
> being written at the same time.
>
> 2. We can get the number of remaining available zone
> resources by subtracting the number of active logs from
> the number of max active zones of zoned devices. We can
> use these available zone resources to reduce the number
> of pending bio when switching zones.
>
> 3. The original code for determining zone end was
> after "out":, which would have missed some fio's
> where is_end_zone_blkaddr(sbi, fio->new_blkaddr)
> was true. I've moved this code before "skip:" to
> make sure it's done for each fio.
Could you please keep #3 as a separate patch?
>
> Signed-off-by: Wenjie Qi <qwjhust@gmail.com>
> ---
> fs/f2fs/data.c | 38 ++++++++++++++++++++++++++++----------
> fs/f2fs/f2fs.h | 2 ++
> fs/f2fs/super.c | 9 +++++++++
> 3 files changed, 39 insertions(+), 10 deletions(-)
>
> diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
> index dce8defdf4c7..6b11364e94b8 100644
> --- a/fs/f2fs/data.c
> +++ b/fs/f2fs/data.c
> @@ -392,6 +392,19 @@ static void f2fs_zone_write_end_io(struct bio *bio)
> complete(&io->zone_wait);
> f2fs_write_end_io(bio);
> }
> +
> +static void f2fs_zone_write_end_io_nowait(struct bio *bio)
> +{
> +#ifdef CONFIG_F2FS_IOSTAT
> + struct bio_iostat_ctx *iostat_ctx = bio->bi_private;
> + struct f2fs_sb_info *sbi = iostat_ctx->sbi;
> +#else
> + struct f2fs_sb_info *sbi = (struct f2fs_sb_info *)bio->bi_private;
> +#endif
> +
> + atomic_inc(&sbi->available_active_zones);
> + f2fs_write_end_io(bio);
> +}
> #endif
>
> struct block_device *f2fs_target_device(struct f2fs_sb_info *sbi,
> @@ -1080,22 +1093,27 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
> io->last_block_in_bio = fio->new_blkaddr;
>
> trace_f2fs_submit_page_write(fio->page, fio);
> -skip:
> - if (fio->in_list)
> - goto next;
> -out:
> #ifdef CONFIG_BLK_DEV_ZONED
> if (f2fs_sb_has_blkzoned(sbi) && btype < META &&
> is_end_zone_blkaddr(sbi, fio->new_blkaddr)) {
> - bio_get(io->bio);
> - reinit_completion(&io->zone_wait);
> - io->bi_private = io->bio->bi_private;
> - io->bio->bi_private = io;
> - io->bio->bi_end_io = f2fs_zone_write_end_io;
> - io->zone_pending_bio = io->bio;
> + if (!atomic_add_negative(-1, &sbi->available_active_zones)) {
> + io->bio->bi_end_io = f2fs_zone_write_end_io_nowait;
> + } else {
> + atomic_inc(&sbi->available_active_zones);
> + bio_get(io->bio);
> + reinit_completion(&io->zone_wait);
> + io->bi_private = io->bio->bi_private;
> + io->bio->bi_private = io;
> + io->bio->bi_end_io = f2fs_zone_write_end_io;
> + io->zone_pending_bio = io->bio;
> + }
> __submit_merged_bio(io);
> }
> #endif
> +skip:
> + if (fio->in_list)
> + goto next;
> +out:
> if (is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN) ||
> !f2fs_is_checkpoint_ready(sbi))
> __submit_merged_bio(io);
> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> index 65294e3b0bef..1b1833e1d10e 100644
> --- a/fs/f2fs/f2fs.h
> +++ b/fs/f2fs/f2fs.h
> @@ -1551,6 +1551,8 @@ struct f2fs_sb_info {
>
> #ifdef CONFIG_BLK_DEV_ZONED
> unsigned int blocks_per_blkz; /* F2FS blocks per zone */
> + unsigned int max_active_zones; /* max zone resources of the zoned device */
> + atomic_t available_active_zones; /* remaining zone resources */
> #endif
>
> /* for node-related operations */
> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> index 206d03c82d96..c79919425d63 100644
> --- a/fs/f2fs/super.c
> +++ b/fs/f2fs/super.c
> @@ -3932,6 +3932,15 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int devi)
> if (!f2fs_sb_has_blkzoned(sbi))
> return 0;
>
> + sbi->max_active_zones = bdev_max_active_zones(bdev);
> + if (sbi->max_active_zones && (sbi->max_active_zones < F2FS_OPTION(sbi).active_logs)) {
> + f2fs_err(sbi,
> + "zoned: max active zones %u is too small, need at least %u active zones",
> + sbi->max_active_zones, F2FS_OPTION(sbi).active_logs);
> + return -EINVAL;
> + }
> + atomic_set(&sbi->available_active_zones, sbi->max_active_zones - F2FS_OPTION(sbi).active_logs);
> +
> zone_sectors = bdev_zone_sectors(bdev);
> if (!is_power_of_2(zone_sectors)) {
> f2fs_err(sbi, "F2FS does not support non power of 2 zone sizes\n");
> --
> 2.34.1
next prev parent reply other threads:[~2024-01-26 23:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-09 3:58 [PATCH v2] f2fs: fix max open zone constraints Wenjie
2024-01-26 23:08 ` Jaegeuk Kim [this message]
2024-01-27 2:07 ` Wenjie Qi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZbQ7XmFpAMSXslkU@google.com \
--to=jaegeuk@kernel.org \
--cc=chao@kernel.org \
--cc=guoweichao@oppo.com \
--cc=hustqwj@hust.edu.cn \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=qwjhust@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox