Re: [PATCH v2 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Mon, Feb 05, 2024 at 07:36:20PM +0100, Jesus Gonzalez wrote:

Thank you for the update, my comments below.

First of all, it would be nice also to try to contact with Realtek and make
them aware again. Have anybody talked to them previously?

Also read this thread:
https://lore.kernel.org/linux-iio/CACAwPwYQHRcrabw9=0tvenPzAcwwW1pTaR6a+AEWBF9Hqf_wXQ@mail.gmail.com/

> "10EC5280" is used by several manufacturers like Lenovo, GPD, or AYA (and 
> probably others) in their ACPI table as the ID for the bmi160 IMU. This 
> means the bmi160_i2c driver won't bind to it, and the IMU is unavailable 
> to the user. Manufacturers have been approached on several occasions to 
> try getting a BIOS with a fixed ID, mostly without actual positive 
> results, and since affected devices are already a few years old, this is 
> not expected to change. This patch enables using the bmi160_i2c driver for 
> the bmi160 IMU on these devices.

You have trailing whitespaces in each of the line.

> Here is the relevant extract from the DSDT of a GPD Win Max 2 (AMD 6800U
> model) with the latest firmware 1.05 installed. GPD sees this as WONTFIX
> with the argument of the device working with the Windows drivers.

>      Scope (_SB.I2CC)
>     {

Cut off these 2 lines.

>         Device (BMA2)
>         {
>             Name (_ADR, Zero)  // _ADR: Address
>             Name (_HID, "10EC5280")  // _HID: Hardware ID
>             Name (_CID, "10EC5280")  // _CID: Compatible ID
>             Name (_DDN, "Accelerometer")  // _DDN: DOS Device Name
>             Name (_UID, One)  // _UID: Unique ID
>             Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
>             {
>                 Name (RBUF, ResourceTemplate ()
>                 {
>                     I2cSerialBusV2 (0x0069, ControllerInitiated, 0x00061A80,
>                         AddressingMode7Bit, "\\_SB.I2CC",
>                         0x00, ResourceConsumer, , Exclusive,
>                         )
>                 })
>                 Return (RBUF) /* \_SB_.I2CC.BMA2._CRS.RBUF */
>             }

Please, cut the below...

> 
>             OperationRegion (CMS2, SystemIO, 0x72, 0x02)
>             Field (CMS2, ByteAcc, NoLock, Preserve)
>             {
>                 IND2,   8, 
>                 DAT2,   8
>             }
> 
>             IndexField (IND2, DAT2, ByteAcc, NoLock, Preserve)
>             {
>                 Offset (0x74), 
>                 BACS,   32
>             }
> 
>             Method (ROMS, 0, NotSerialized)
>             {
>                 Name (RBUF, Package (0x03)
>                 {
>                     "0 -1 0", 
>                     "-1 0 0", 
>                     "0 0 1"
>                 })
>                 Return (RBUF) /* \_SB_.I2CC.BMA2.ROMS.RBUF */
>             }
> 
>             Method (CALS, 1, NotSerialized)
>             {
>                 Local0 = Arg0
>                 If (((Local0 == Zero) || (Local0 == Ones)))
>                 {
>                     Return (Local0)
>                 }
>                 Else
>                 {
>                     BACS = Local0
>                 }
>             }
> 
>             Method (_STA, 0, NotSerialized)  // _STA: Status
>             {
>                 Return (0x0F)
>             }

...till here. Replace it by ... on a single line.

>         }


>     }

As per above (this is part of Scope, so drop it as well).

...

> +	/* FIRMWARE BUG WORKAROUND
> +	 * Some manufacturers like GPD, Lenovo or Aya used the incorrect
> +	 * ID "10EC5280" for bmi160 in their DSDT. A fixed firmware is not
> +	 * available as of Feb 2024 after trying to work with OEMs, and
> +	 * this is not expected to change anymore since at least some of
> +	 * the affected devices are from 2021/2022.
> +	 */
> +	{"10EC5280", 0},

 /*
  * Please, use the correct style of
  * multi-line comments, like in this
  * example.
  */

-- 
With Best Regards,
Andy Shevchenko