From: Jim Harris <jim.harris@samsung.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "Leon Romanovsky" <leonro@nvidia.com>,
"Kuppuswamy Sathyanarayanan"
<sathyanarayanan.kuppuswamy@linux.intel.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Jason Gunthorpe" <jgg@nvidia.com>,
"Alex Williamson" <alex.williamson@redhat.com>,
"Pierre Crégut" <pierre.cregut@orange.com>
Subject: Re: [PATCH v2 1/2] PCI/IOV: Revert "PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes"
Date: Mon, 12 Feb 2024 22:59:03 +0000 [thread overview]
Message-ID: <ZcqitnWTh+zQ+H4p@ubuntu> (raw)
In-Reply-To: <20240212202714.GA1142983@bhelgaas>
On Mon, Feb 12, 2024 at 02:27:14PM -0600, Bjorn Helgaas wrote:
> On Sun, Feb 11, 2024 at 10:48:44AM +0200, Leon Romanovsky wrote:
> > On Fri, Feb 09, 2024 at 07:20:28PM -0800, Kuppuswamy Sathyanarayanan wrote:
> > > On 2/9/24 3:52 PM, Jim Harris wrote:
> > > > If an SR-IOV enabled device is held by vfio, and the device is removed,
> > > > vfio will hold device lock and notify userspace of the removal. If
> > > > userspace reads the sriov_numvfs sysfs entry, that thread will be blocked
> > > > since sriov_numvfs_show() also tries to acquire the device lock. If that
> > > > same thread is responsible for releasing the device to vfio, it results in
> > > > a deadlock.
> > > >
> > > > The proper way to detect a change to the num_VFs value is to listen for a
> > > > sysfs event, not to add a device_lock() on the attribute _show() in the
> > > > kernel.
>
> The lock was not about detecting a change; Pierre did this:
>
> ip monitor dev ${DEVICE} | grep --line-buffered "^${id}:" | while read line; do \
> cat ${path}/device/sriov_numvfs; \
>
> which I assume works by listening for sysfs events. The problem was
> that after the event occurred, the sriov_numvfs read got a stale value
> (see https://bugzilla.kernel.org/show_bug.cgi?id=202991).
I don't think 'ip monitor dev' listens for any sysfs events. Or at least if
I have this running and write values to sriov_numvfs, I don't see any
output.
It looks like the original bug report was against v5.0 (matching by dates
and the patch file attached). In that code, we have:
kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE);
iov->num_VFs = nr_virtfn;
which is identical to how the code looks today. Is it possible that
userspace could react to this uevent and read the stale num_VFs before
iov->num_VFs gets written here? I mean, theoretically it's possible, but
from the bug report it seems like the scenario Pierre was facing was
100% reproducible.
It would be great if we could get input from Pierre on this. It isn't clear
to me from the bug report what exactly is updating the sriov_numvfs sysfs
entry, and what is triggering that update.
We could also revisit my original suggestion, which was to use a
discrete lock just for this sysfs entry, rather than overloading the
device lock. That probably has lower risk of introducing an unintended
regression.
https://lore.kernel.org/linux-pci/ZXNNQkXzluoyeguu@bgt-140510-bm01.eng.stellus.in/
>
> So I would drop this sentence because I don't think it accurately
> reflects the reason for 35ff867b7657.
>
> > > Since you are reverting a commit that synchronizes SysFS read
> > > /write, please add some comments about why it is not an
> > > issue anymore.
> >
> > It was never an issue, the idea that sysfs read and write should be
> > serialized by kernel is not correct by definition.
>
> I think it *was* an issue. The behavior Pierre observed at was
> clearly wrong, and we added 35ff867b7657 ("PCI/IOV: Serialize sysfs
> sriov_numvfs reads vs writes") to resolve it.
>
> We should try to avoid reintroducing the problem, so I think we should
> probably squash these two patches and describe it as a deadlock fix
> instead of dismissing 35ff867b7657 as being based on false premises.
>
> It would be awesome if you had time to verify that these patches also
> resolve the problem you saw, Pierre.
>
> I think we should also add:
>
> Fixes: 35ff867b7657 ("PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes")
>
> as a trigger for backporting this to kernels that include
> 35ff867b7657.
>
> Bjorn
>
> > > > This reverts commit 35ff867b76576e32f34c698ccd11343f7d616204.
> > > > Revert had a small conflict, the sprintf() is now changed to sysfs_emit().
> > > >
> > > > Link: https://lore.kernel.org/linux-pci/ZXJI5+f8bUelVXqu@ubuntu/
> > > > Suggested-by: Leon Romanovsky <leonro@nvidia.com>
> > > > Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
> > > > Signed-off-by: Jim Harris <jim.harris@samsung.com>
> > > > ---
> > > > drivers/pci/iov.c | 8 +-------
> > > > 1 file changed, 1 insertion(+), 7 deletions(-)
> > > >
> > > > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > > > index aaa33e8dc4c9..0ca20cd518d5 100644
> > > > --- a/drivers/pci/iov.c
> > > > +++ b/drivers/pci/iov.c
> > > > @@ -395,14 +395,8 @@ static ssize_t sriov_numvfs_show(struct device *dev,
> > > > char *buf)
> > > > {
> > > > struct pci_dev *pdev = to_pci_dev(dev);
> > > > - u16 num_vfs;
> > > > -
> > > > - /* Serialize vs sriov_numvfs_store() so readers see valid num_VFs */
> > > > - device_lock(&pdev->dev);
> > > > - num_vfs = pdev->sriov->num_VFs;
> > > > - device_unlock(&pdev->dev);
> > > >
> > > > - return sysfs_emit(buf, "%u\n", num_vfs);
> > > > + return sysfs_emit(buf, "%u\n", pdev->sriov->num_VFs);
> > > > }
> > > >
> > > > /*
> > > >
> > > --
> > > Sathyanarayanan Kuppuswamy
> > > Linux Kernel Developer
> > >
next prev parent reply other threads:[~2024-02-12 22:59 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20240209235208uscas1p26c658c64cc85711cd3aa6312224164fc@uscas1p2.samsung.com>
2024-02-09 23:52 ` [PATCH v2 0/2] PCI/IOV: sriov_numvfs bug fixes Jim Harris
2024-02-09 23:52 ` [PATCH v2 1/2] PCI/IOV: Revert "PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes" Jim Harris
2024-02-10 3:20 ` Kuppuswamy Sathyanarayanan
2024-02-11 8:48 ` Leon Romanovsky
2024-02-11 19:15 ` Kuppuswamy Sathyanarayanan
2024-02-12 9:31 ` Leon Romanovsky
2024-02-12 20:27 ` Bjorn Helgaas
2024-02-12 22:59 ` Jim Harris [this message]
2024-02-13 7:37 ` Leon Romanovsky
2024-02-13 9:40 ` pierre.cregut
2024-02-13 14:59 ` Jason Gunthorpe
2024-02-13 7:34 ` Leon Romanovsky
2024-02-13 15:59 ` Bjorn Helgaas
2024-02-13 17:46 ` Leon Romanovsky
2024-02-13 18:00 ` Kuppuswamy Sathyanarayanan
2024-02-13 19:45 ` Bjorn Helgaas
2024-02-14 7:16 ` Leon Romanovsky
2024-02-14 17:04 ` Jim Harris
2024-02-14 17:50 ` Bjorn Helgaas
2024-02-14 22:55 ` Jim Harris
2024-02-09 23:52 ` [PATCH v2 2/2] pci/iov: fix kobject_uevent() ordering in sriov_enable() Jim Harris
2024-02-10 3:22 ` Kuppuswamy Sathyanarayanan
2024-02-12 15:17 ` Keith Busch
2024-02-12 15:29 ` Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZcqitnWTh+zQ+H4p@ubuntu \
--to=jim.harris@samsung.com \
--cc=alex.williamson@redhat.com \
--cc=bhelgaas@google.com \
--cc=helgaas@kernel.org \
--cc=jgg@nvidia.com \
--cc=leonro@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=pierre.cregut@orange.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox