Re: [PATCH v2 2/6] iio: pressure: Simplify read_* functions

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Wed, Mar 13, 2024 at 06:40:03PM +0100, Vasileios Amoiridis wrote:

In the Subject: ... read_*() functions

> Add the coefficients for the IIO standard units inside the chip_info
> structure.
> 
> Remove the calculations with the coefficients for the IIO compatibility
> from inside the read_(temp/press/humid) functions and move it to the

read_{temp,press,humid}()

> read_raw function.

read_raw()

> Execute the calculations with the coefficients inside the read_raw

read_raw()

> oneshot capture functions.
> 
> Also fix raw_* and comp_* values signs.

...

>  		case IIO_TEMP:
> -			ret = data->chip_info->read_temp(data, val, val2);
> +			ret = data->chip_info->read_temp(data);
> +			*val = data->chip_info->temp_coeffs[0] * ret;
> +			*val2 = data->chip_info->temp_coeffs[1];

> +			if (!strcmp(indio_dev->name, "bmp580"))
> +				ret = IIO_VAL_FRACTIONAL_LOG2;
> +			else
> +				ret = IIO_VAL_FRACTIONAL;

I'm wondering if we may replace these strcmp():s by using enum and respective
values in chip_info.

>  			break;

-- 
With Best Regards,
Andy Shevchenko