Re: [PATCH] timers/migration: Fix ignored event due to missing CPU update

[Frederic Weisbecker <frederic@kernel.org>]

Le Mon, Apr 01, 2024 at 11:48:59PM +0200, Frederic Weisbecker a écrit :
> When a group event is updated with its expiry unchanged but a different
> CPU, that target change may go unnoticed and the event may be propagated
> up with a stale CPU value. The following depicts a scenario that has
> been actually observed:
> 
>                        [GRP2:0]
>                    migrator = GRP1:1
>                    active   = GRP1:1
>                    nextevt  = TGRP1:0 (T0)
>                     /              \
>                [GRP1:0]           [GRP1:1]
>             migrator = NONE       [...]
>             active   = NONE
>             nextevt  = TGRP0:0 (T0)
>             /           \
>         [GRP0:0]       [...]
>       migrator = NONE
>       active   = NONE
>       nextevt  = T0
>       /         \
>     0 (T0)       1 (T1)
>     idle         idle
> 
> 0) The hierarchy has 3 levels. The left part (GRP1:0) is all idle,
> including CPU 0 and CPU 1 which have a timer each: T0 and T1. They have
> the same expiry value.
> 
>                        [GRP2:0]
>                    migrator = GRP1:1
>                    active   = GRP1:1
>                    nextevt  = KTIME_MAX
>                     /              \
>                [GRP1:0]           [GRP1:1]
>             migrator = NONE       [...]
>             active   = NONE
>             nextevt  = TGRP0:0 (T0)
>             /           \
>         [GRP0:0]       [...]
>       migrator = NONE
>       active   = NONE
>       nextevt  = T0
>       /         \
>     0 (T0)       1 (T1)
>     idle         idle
> 
> 1) The migrator in GRP1:1 handles remotely T0. The event is dequeued
> from the top and T0 executed.
> 
>                        [GRP2:0]
>                    migrator = GRP1:1
>                    active   = GRP1:1
>                    nextevt  = KTIME_MAX
>                     /              \
>                [GRP1:0]           [GRP1:1]
>             migrator = NONE       [...]
>             active   = NONE
>             nextevt  = TGRP0:0 (T0)
>             /           \
>         [GRP0:0]       [...]
>       migrator = NONE
>       active   = NONE
>       nextevt  = T1
>       /         \
>     0            1 (T1)
>     idle         idle
> 
> 2) The migrator in GRP1:1 fetches the next timer for CPU 0 and finds
> none. But it updates the events from its groups, starting with GRP0:0
> which now has T1 as its next event. So far so good.
> 
>                        [GRP2:0]
>                    migrator = GRP1:1
>                    active   = GRP1:1
>                    nextevt  = KTIME_MAX
>                     /              \
>                [GRP1:0]           [GRP1:1]
>             migrator = NONE       [...]
>             active   = NONE
>             nextevt  = TGRP0:0 (T0)
>             /           \
>         [GRP0:0]       [...]
>       migrator = NONE
>       active   = NONE
>       nextevt  = T1
>       /         \
>     0            1 (T1)
>     idle         idle
> 
> 3) The migrator in GRP1:1 proceeds upward and updates the events in
> GRP1:0. The child event TGRP0:0 is found queued with the same expiry
> as before. And therefore it is left unchanged. However the target CPU
> is not the same but that fact is ignored so TGRP0:0 still points to
> CPU 0 when it should point to CPU 1.
> 
>                        [GRP2:0]
>                    migrator = GRP1:1
>                    active   = GRP1:1
>                    nextevt  = TGRP1:0 (T0)
>                     /              \
>                [GRP1:0]           [GRP1:1]
>             migrator = NONE       [...]
>             active   = NONE
>             nextevt  = TGRP0:0 (T0)
>             /           \
>         [GRP0:0]       [...]
>       migrator = NONE
>       active   = NONE
>       nextevt  = T1
>       /         \
>     0            1 (T1)
>     idle         idle
> 
> 4) The propagation has reached the top level and TGRP1:0, having TGRP0:0
> as its first event, also wrongly points to CPU 0. TGRP1:0 is added to
> the top level group.
> 
>                        [GRP2:0]
>                    migrator = GRP1:1
>                    active   = GRP1:1
>                    nextevt  = KTIME_MAX
>                     /              \
>                [GRP1:0]           [GRP1:1]
>             migrator = NONE       [...]
>             active   = NONE
>             nextevt  = TGRP0:0 (T0)
>             /           \
>         [GRP0:0]       [...]
>       migrator = NONE
>       active   = NONE
>       nextevt  = T1
>       /         \
>     0            1 (T1)
>     idle         idle
> 
> 5) The migrator in GRP1:1 dequeues the next event in top level pointing
> to CPU 0. But since it actually doesn't see any real event in CPU 0, it
> early returns.
> 
> 6) T1 is left unhandled until either CPU 0 or CPU 1 wake up.
> 
> Some other bad scenario may involve trees with just two levels.
> 
> Fix this with checking the CPU, along with the expiry value before
> considering to early return while updating a queued event.
> 
> Signed-off-by: Frederic Weisbecker <frederic@kernel.org>

Fixes: 7ee988770326 ("timers: Implement the hierarchical pull model")