[PATCH v2 1/1] auxdisplay: linedisp: Group display drivers together

Andy Shevchenko
2024-03-26T19:05:54Z

For better usability group the display drivers together in Kconfig.
With this we will have the following sections:
- Character LCD
- Samsung KS0108 LCD controller
- Single character line display
- Character LCD with non-conforming interface

Keep Makefile entries sorted alphabetically.

While at it, drop redundant 'default n' entries.

Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: kept Makefile sorted alphabetically (Geert)
drivers/auxdisplay/Kconfig | 346 +++++++++++++++++++-----------------
drivers/auxdisplay/Makefile | 10 +-
2 files changed, 184 insertions(+), 172 deletions(-)

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 151d95f96b11..69d2138d7efb 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -16,6 +16,9 @@ menuconfig AUXDISPLAY

if AUXDISPLAY

+#
+# Character LCD section
+#
config CHARLCD
tristate "Character LCD core support" if COMPILE_TEST
help
@@ -25,12 +28,6 @@ config CHARLCD
This is some character LCD core interface that multiple drivers can
use.

-config LINEDISP
- tristate "Character line display core support" if COMPILE_TEST
- help
- This is the core support for single-line character displays, to be
- selected by drivers that use it.
-
config HD44780_COMMON
tristate "Common functions for HD44780 (and compatibles) LCD displays" if COMPILE_TEST
select CHARLCD
@@ -52,145 +49,6 @@ config HD44780
kernel and started at boot.
If you don't understand what all this is about, say N.

-config KS0108
- tristate "KS0108 LCD Controller"
- depends on PARPORT_PC
- default n
- help
- If you have a LCD controlled by one or more KS0108
- controllers, say Y. You will need also another more specific
- driver for your LCD.
-
- Depends on Parallel Port support. If you say Y at
- parport, you will be able to compile this as a module (M)
- and built-in as well (Y).
-
- To compile this as a module, choose M here:
- the module will be called ks0108.
-
- If unsure, say N.
-
-config KS0108_PORT
- hex "Parallel port where the LCD is connected"
- depends on KS0108
- default 0x378
- help
- The address of the parallel port where the LCD is connected.
-
- The first standard parallel port address is 0x378.
- The second standard parallel port address is 0x278.
- The third standard parallel port address is 0x3BC.
-
- You can specify a different address if you need.
-
- If you don't know what I'm talking about, load the parport module,
- and execute "dmesg" or "cat /proc/ioports". You can see there how
- many parallel ports are present and which address each one has.
-
- Usually you only need to use 0x378.
-
- If you compile this as a module, you can still override this
- using the module parameters.
-
-config KS0108_DELAY
- int "Delay between each control writing (microseconds)"
- depends on KS0108
- default "2"
- help
- Amount of time the ks0108 should wait between each control write
- to the parallel port.
-
- If your LCD seems to miss random writings, increment this.
-
- If you don't know what I'm talking about, ignore it.
-
- If you compile this as a module, you can still override this
- value using the module parameters.
-
-config CFAG12864B
- tristate "CFAG12864B LCD"
- depends on X86
- depends on FB
- depends on KS0108
- select FB_SYSMEM_HELPERS
- default n
- help
- If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
- say Y. You also need the ks0108 LCD Controller driver.
-
- For help about how to wire your LCD to the parallel port,
- check Documentation/admin-guide/auxdisplay/cfag12864b.rst
-
- Depends on the x86 arch and the framebuffer support.
-
- The LCD framebuffer driver can be attached to a console.
- It will work fine. However, you can't attach it to the fbdev driver
- of the xorg server.
-
- To compile this as a module, choose M here:
- the modules will be called cfag12864b and cfag12864bfb.
-
- If unsure, say N.
-
-config CFAG12864B_RATE
- int "Refresh rate (hertz)"
- depends on CFAG12864B
- default "20"
- help
- Refresh rate of the LCD.
-
- As the LCD is not memory mapped, the driver has to make the work by
- software. This means you should be careful setting this value higher.
- If your CPUs are really slow or you feel the system is slowed down,
- decrease the value.
-
- Be careful modifying this value to a very high value:
- You can freeze the computer, or the LCD maybe can't draw as fast as you
- are requesting.
-
- If you don't know what I'm talking about, ignore it.
-
- If you compile this as a module, you can still override this
- value using the module parameters.
-
-config IMG_ASCII_LCD
- tristate "Imagination Technologies ASCII LCD Display"
- depends on HAS_IOMEM
- default y if MIPS_MALTA
- select MFD_SYSCON
- select LINEDISP
- help
- Enable this to support the simple ASCII LCD displays found on
- development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
- from Imagination Technologies.
-
-config HT16K33
- tristate "Holtek Ht16K33 LED controller with keyscan"
- depends on FB && I2C && INPUT
- select FB_SYSMEM_HELPERS
- select INPUT_MATRIXKMAP
- select FB_BACKLIGHT
- select NEW_LEDS
- select LEDS_CLASS
- select LINEDISP
- help
- Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
- LED controller driver with keyscan.
-
-config MAX6959
- tristate "Maxim MAX6958/6959 7-segment LED controller"
- depends on I2C
- select REGMAP_I2C
- select LINEDISP
- help
- If you say yes here you get support for the following Maxim chips
- (I2C 7-segment LED display controller):
- - MAX6958
- - MAX6959 (input support)
-
- This driver can also be built as a module. If so, the module
- will be called max6959.
-
config LCD2S
tristate "lcd2s 20x4 character display over I2C console"
depends on I2C
@@ -201,27 +59,6 @@ config LCD2S
is a simple single color character display. You have to connect it
to an I2C bus.

-config ARM_CHARLCD
- bool "ARM Ltd. Character LCD Driver"
- depends on PLAT_VERSATILE
- help
- This is a driver for the character LCD found on the ARM Ltd.
- Versatile and RealView Platform Baseboards. It doesn't do
- very much more than display the text "ARM Linux" on the first
- line and the Linux version on the second line, but that's
- still useful.
-
-config SEG_LED_GPIO
- tristate "Generic 7-segment LED display"
- depends on GPIOLIB || COMPILE_TEST
- select LINEDISP
- help
- This driver supports a generic 7-segment LED display made up
- of GPIO pins connected to the individual segments.
-
- This driver can also be built as a module. If so, the module
- will be called seg-led-gpio.
-
menuconfig PARPORT_PANEL
tristate "Parallel port LCD/Keypad Panel support"
depends on PARPORT
@@ -480,7 +317,6 @@ endif # PARPORT_PANEL
config PANEL_CHANGE_MESSAGE
bool "Change LCD initialization message ?"
depends on CHARLCD
- default "n"
help
This allows you to replace the boot message indicating the kernel version
and the driver version with a custom message. This is useful on appliances
@@ -529,8 +365,184 @@ choice

endchoice

+#
+# Samsung KS0108 LCD controller section
+#
+config KS0108
+ tristate "KS0108 LCD Controller"
+ depends on PARPORT_PC
+ help
+ If you have a LCD controlled by one or more KS0108
+ controllers, say Y. You will need also another more specific
+ driver for your LCD.
+
+ Depends on Parallel Port support. If you say Y at
+ parport, you will be able to compile this as a module (M)
+ and built-in as well (Y).
+
+ To compile this as a module, choose M here:
+ the module will be called ks0108.
+
+ If unsure, say N.
+
+config KS0108_PORT
+ hex "Parallel port where the LCD is connected"
+ depends on KS0108
+ default 0x378
+ help
+ The address of the parallel port where the LCD is connected.
+
+ The first standard parallel port address is 0x378.
+ The second standard parallel port address is 0x278.
+ The third standard parallel port address is 0x3BC.
+
+ You can specify a different address if you need.
+
+ If you don't know what I'm talking about, load the parport module,
+ and execute "dmesg" or "cat /proc/ioports". You can see there how
+ many parallel ports are present and which address each one has.
+
+ Usually you only need to use 0x378.
+
+ If you compile this as a module, you can still override this
+ using the module parameters.
+
+config KS0108_DELAY
+ int "Delay between each control writing (microseconds)"
+ depends on KS0108
+ default "2"
+ help
+ Amount of time the ks0108 should wait between each control write
+ to the parallel port.
+
+ If your LCD seems to miss random writings, increment this.
+
+ If you don't know what I'm talking about, ignore it.
+
+ If you compile this as a module, you can still override this
+ value using the module parameters.
+
+config CFAG12864B
+ tristate "CFAG12864B LCD"
+ depends on X86
+ depends on FB
+ depends on KS0108
+ select FB_SYSMEM_HELPERS
+ help
+ If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
+ say Y. You also need the ks0108 LCD Controller driver.
+
+ For help about how to wire your LCD to the parallel port,
+ check Documentation/admin-guide/auxdisplay/cfag12864b.rst
+
+ Depends on the x86 arch and the framebuffer support.
+
+ The LCD framebuffer driver can be attached to a console.
+ It will work fine. However, you can't attach it to the fbdev driver
+ of the xorg server.
+
+ To compile this as a module, choose M here:
+ the modules will be called cfag12864b and cfag12864bfb.
+
+ If unsure, say N.
+
+config CFAG12864B_RATE
+ int "Refresh rate (hertz)"
+ depends on CFAG12864B
+ default "20"
+ help
+ Refresh rate of the LCD.
+
+ As the LCD is not memory mapped, the driver has to make the work by
+ software. This means you should be careful setting this value higher.
+ If your CPUs are really slow or you feel the system is slowed down,
+ decrease the value.
+
+ Be careful modifying this value to a very high value:
+ You can freeze the computer, or the LCD maybe can't draw as fast as you
+ are requesting.
+
+ If you don't know what I'm talking about, ignore it.
+
+ If you compile this as a module, you can still override this
+ value using the module parameters.
+
+#
+# Single character line display section
+#
+config LINEDISP
+ tristate "Character line display core support" if COMPILE_TEST
+ help
+ This is the core support for single-line character displays, to be
+ selected by drivers that use it.
+
+config IMG_ASCII_LCD
+ tristate "Imagination Technologies ASCII LCD Display"
+ depends on HAS_IOMEM
+ default y if MIPS_MALTA
+ select MFD_SYSCON
+ select LINEDISP
+ help
+ Enable this to support the simple ASCII LCD displays found on
+ development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
+ from Imagination Technologies.
+
+config HT16K33
+ tristate "Holtek Ht16K33 LED controller with keyscan"
+ depends on FB && I2C && INPUT
+ select FB_SYSMEM_HELPERS
+ select INPUT_MATRIXKMAP
+ select FB_BACKLIGHT
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LINEDISP
+ help
+ Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
+ LED controller driver with keyscan.
+
+config MAX6959
+ tristate "Maxim MAX6958/6959 7-segment LED controller"
+ depends on I2C
+ select REGMAP_I2C
+ select LINEDISP
+ help
+ If you say yes here you get support for the following Maxim chips
+ (I2C 7-segment LED display controller):
+ - MAX6958
+ - MAX6959 (input support)
+
+ This driver can also be built as a module. If so, the module
+ will be called max6959.
+
+config SEG_LED_GPIO
+ tristate "Generic 7-segment LED display"
+ depends on GPIOLIB || COMPILE_TEST
+ select LINEDISP
+ help
+ This driver supports a generic 7-segment LED display made up
+ of GPIO pins connected to the individual segments.
+
+ This driver can also be built as a module. If so, the module
+ will be called seg-led-gpio.
+
+#
+# Character LCD with non-conforming interface section
+#
+config ARM_CHARLCD
+ bool "ARM Ltd. Character LCD Driver"
+ depends on PLAT_VERSATILE
+ help
+ This is a driver for the character LCD found on the ARM Ltd.
+ Versatile and RealView Platform Baseboards. It doesn't do
+ very much more than display the text "ARM Linux" on the first
+ line and the Linux version on the second line, but that's
+ still useful.
+
endif # AUXDISPLAY

+#
+# Deprecated options
+#
config PANEL
tristate "Parallel port LCD/Keypad Panel support (OLD OPTION)"
depends on PARPORT
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 4a8ea41b0550..f5c13ed1cd4f 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -3,16 +3,16 @@
# Makefile for the kernel auxiliary displays device drivers.
#

+obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
+obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o
obj-$(CONFIG_CHARLCD) += charlcd.o
obj-$(CONFIG_HD44780_COMMON) += hd44780_common.o
-obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
-obj-$(CONFIG_KS0108) += ks0108.o
-obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o
-obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o
obj-$(CONFIG_HD44780) += hd44780.o
obj-$(CONFIG_HT16K33) += ht16k33.o
-obj-$(CONFIG_PARPORT_PANEL) += panel.o
+obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o
+obj-$(CONFIG_KS0108) += ks0108.o
obj-$(CONFIG_LCD2S) += lcd2s.o
obj-$(CONFIG_LINEDISP) += line-display.o
obj-$(CONFIG_MAX6959) += max6959.o
+obj-$(CONFIG_PARPORT_PANEL) += panel.o
obj-$(CONFIG_SEG_LED_GPIO) += seg-led-gpio.o
--
2.43.0.rc1.1.gbec44491f096