Re: [PATCH v2 2/2] gpiolib: Show more info for interrupt only lines in debugfs

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Fri, May 31, 2024 at 01:19:56PM +0200, Alexander Stein wrote:
> Hi,
> 
> Am Donnerstag, 30. Mai 2024, 21:12:30 CEST schrieb Andy Shevchenko:
> > Show more info for interrupt only lines in debugfs. It's useful
> > to monitor the lines that have been never requested as GPIOs,
> > but IRQs.
> 
> I was trying to test this on TQMa8MPQL (i.MX8MP) using gpio-mxc.c.
> But apparently this series only has an effect when gpiochip_lock_as_irq()
> is called eventually. I'm wondering what needs to be done so IRQ only
> GPIOs are listed in debugfs. Using irq_request_resources/irq_release_resources
> similar to what pinctrl-at91.c is doing?

For the record on Intel Galileo Gen2 I see this difference

Before:

gpiochip4: GPIOs 8-15, parent: platform/gpio-dwapb.1, gpio-dwapb.1:
gpio-10  (                    |spi169 CS0          ) out hi

After:

gpiochip4: GPIOs 8-15, parent: platform/gpio-dwapb.1, gpio-dwapb.1:
gpio-9   (                    |irq                 ) in  hi IRQ ACTIVE LOW
gpio-10  (                    |spi169 CS0          ) out hi

but it's handled via gpiolib-acpi.

-- 
With Best Regards,
Andy Shevchenko