From: Alison Schofield <alison.schofield@intel.com>
To: Huang Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>,
linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Dave Jiang <dave.jiang@intel.com>,
Bharata B Rao <bharata@amd.com>,
Alistair Popple <apopple@nvidia.com>,
"Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Subject: Re: [PATCH -V2] cxl/region: Support to calculate memory tier abstract distance
Date: Tue, 11 Jun 2024 14:28:29 -0700 [thread overview]
Message-ID: <ZmjBfcaosIlOODFR@aschofie-mobl2> (raw)
In-Reply-To: <20240611055423.470574-1-ying.huang@intel.com>
On Tue, Jun 11, 2024 at 01:54:23PM +0800, Ying Huang wrote:
> To place memory nodes backed by CXL regions in the appropriate memory
> tiers. So that, pages can be promoted/demoted with the existing
> memory tiering mechanism.
How about more context for the unfamiliar because my first lookup was
what's an 'abstract distance'? (not sure I even got it right below ;))
An abstract distance value must be assigned by the driver that makes
the memory available to the system. It reflects relative performance
and is used to place memory nodes backed by CXL regions in the appropriate
memory tiers allowing promotion/demotion within the existing memory tiering
mechanism.
>
> The abstract distance is calculated based on the memory access latency
> and bandwidth of CXL regions. Which in turn comes from the HMAT
> and CDAT, etc.
etc ?
I think the latency and bandwidth were already calculated, so you
don't need to explain those. Perhaps drop the whole 'While in turn
come from..." part.
a bit below...
>
> Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Cc: Dave Jiang <dave.jiang@intel.com>
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Bharata B Rao <bharata@amd.com>
> Cc: Alistair Popple <apopple@nvidia.com>
> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> Changes:
>
> v2:
>
> - Added comments to struct cxl_region and minor fixes (Thanks Jonathan!)
> - Link to v1: https://lore.kernel.org/linux-cxl/20240531024852.282767-1-ying.huang@intel.com/
>
> ---
> drivers/cxl/core/region.c | 40 +++++++++++++++++++++++++++++++++++----
> drivers/cxl/cxl.h | 2 ++
> 2 files changed, 38 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 3c2b6144be23..81d0910c0a02 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -9,6 +9,7 @@
> #include <linux/uuid.h>
> #include <linux/sort.h>
> #include <linux/idr.h>
> +#include <linux/memory-tiers.h>
> #include <cxlmem.h>
> #include <cxl.h>
> #include "core.h"
> @@ -2304,14 +2305,20 @@ static bool cxl_region_update_coordinates(struct cxl_region *cxlr, int nid)
> return true;
> }
>
> +static int cxl_region_nid(struct cxl_region *cxlr)
> +{
> + struct cxl_region_params *p = &cxlr->params;
> + struct cxl_endpoint_decoder *cxled = p->targets[0];
> + struct cxl_decoder *cxld = &cxled->cxld;
> +
> + return phys_to_target_node(cxld->hpa_range.start);
> +}
> +
I believe it's OK to send a resource_size_t to phys_to_target_node()
like this:
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -2308,10 +2308,8 @@ static bool cxl_region_update_coordinates(struct cxl_region *cxlr, int nid)
static int cxl_region_nid(struct cxl_region *cxlr)
{
struct cxl_region_params *p = &cxlr->params;
- struct cxl_endpoint_decoder *cxled = p->targets[0];
- struct cxl_decoder *cxld = &cxled->cxld;
- return phys_to_target_node(cxld->hpa_range.start);
+ return phys_to_target_node(p->res->start);
}
> static int cxl_region_perf_attrs_callback(struct notifier_block *nb,
> unsigned long action, void *arg)
> {
> struct cxl_region *cxlr = container_of(nb, struct cxl_region,
> memory_notifier);
> - struct cxl_region_params *p = &cxlr->params;
> - struct cxl_endpoint_decoder *cxled = p->targets[0];
> - struct cxl_decoder *cxld = &cxled->cxld;
> struct memory_notify *mnb = arg;
> int nid = mnb->status_change_nid;
> int region_nid;
> @@ -2319,7 +2326,7 @@ static int cxl_region_perf_attrs_callback(struct notifier_block *nb,
> if (nid == NUMA_NO_NODE || action != MEM_ONLINE)
> return NOTIFY_DONE;
>
> - region_nid = phys_to_target_node(cxld->hpa_range.start);
> + region_nid = cxl_region_nid(cxlr);
> if (nid != region_nid)
> return NOTIFY_DONE;
>
> @@ -2329,6 +2336,27 @@ static int cxl_region_perf_attrs_callback(struct notifier_block *nb,
> return NOTIFY_OK;
> }
>
> +static int cxl_region_calculate_adistance(struct notifier_block *nb,
> + unsigned long nid, void *data)
> +{
> + struct cxl_region *cxlr = container_of(nb, struct cxl_region,
> + adist_notifier);
> + struct access_coordinate *perf;
> + int *adist = data;
> + int region_nid;
> +
> + region_nid = cxl_region_nid(cxlr);
> + if (nid != region_nid)
> + return NOTIFY_OK;
> +
> + perf = &cxlr->coord[ACCESS_COORDINATE_CPU];
> +
> + if (mt_perf_to_adistance(perf, adist))
> + return NOTIFY_OK;
> +
> + return NOTIFY_STOP;
> +}
> +
> /**
> * devm_cxl_add_region - Adds a region to a decoder
> * @cxlrd: root decoder
> @@ -2371,6 +2399,10 @@ static struct cxl_region *devm_cxl_add_region(struct cxl_root_decoder *cxlrd,
> cxlr->memory_notifier.priority = CXL_CALLBACK_PRI;
> register_memory_notifier(&cxlr->memory_notifier);
>
> + cxlr->adist_notifier.notifier_call = cxl_region_calculate_adistance;
> + cxlr->adist_notifier.priority = 100;
> + register_mt_adistance_algorithm(&cxlr->adist_notifier);
> +
> rc = devm_add_action_or_reset(port->uport_dev, unregister_region, cxlr);
> if (rc)
> return ERR_PTR(rc);
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index 603c0120cff8..f46252373159 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -522,6 +522,7 @@ struct cxl_region_params {
> * @params: active + config params for the region
> * @coord: QoS access coordinates for the region
> * @memory_notifier: notifier for setting the access coordinates to node
> + * @adist_notifier: notifier for calculating the abstract distance of node
> */
> struct cxl_region {
> struct device dev;
> @@ -534,6 +535,7 @@ struct cxl_region {
> struct cxl_region_params params;
> struct access_coordinate coord[ACCESS_COORDINATE_MAX];
> struct notifier_block memory_notifier;
> + struct notifier_block adist_notifier;
> };
>
> struct cxl_nvdimm_bridge {
> --
> 2.39.2
>
>
next prev parent reply other threads:[~2024-06-11 21:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-11 5:54 [PATCH -V2] cxl/region: Support to calculate memory tier abstract distance Huang Ying
2024-06-11 21:28 ` Alison Schofield [this message]
2024-06-12 2:09 ` Huang, Ying
2024-06-12 17:38 ` Alison Schofield
2024-06-13 0:40 ` Huang, Ying
2024-06-17 2:10 ` Huang, Ying
2024-06-17 17:06 ` Dave Jiang
2024-06-18 0:28 ` Huang, Ying
2024-06-12 4:22 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZmjBfcaosIlOODFR@aschofie-mobl2 \
--to=alison.schofield@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.ibm.com \
--cc=apopple@nvidia.com \
--cc=bharata@amd.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox