Re: [PATCH v5 1/3] dmaengine: dw-axi-dmac: Support hardware quirks

Vinod Koul
2024-06-28T07:39:19Z

Hi JiaJie

On 12-06-24, 10:13, JiaJie Ho wrote:
> > On 30-05-24, 11:11, Jia Jie Ho wrote:
> >
> > > +
> > > +struct dw_axi_peripheral_config {
> > > +#define DWAXIDMAC_STARFIVE_SM_ALGO BIT(0)
> >
> > what does this quirk mean?
> >
> > > + u32 quirks;
> >
> > Can you explain why you need this to be exposed. I would prefer we use
> > existing interfaces and not define a new one...
> >
>
> Hi Vinod,
> Thanks for reviewing this.
> This is a dedicated dma controller for the crypto engine.
> I am adding this quirk to:
> 1. Select the src and dest AXI master for transfers between mem and dev.
> Driver currently only uses AXI0 for both.

why cant this information be passed thru DT, that is typically done by
most controllers?

> 2. Workaround a hardware limitation on the crypto engine to
> transfer data > 256B by incrementing the peripheral FIFO offset.

Dont set the transfer data > 256B, you should ideally use maxburst for
configuring the FIFO...

>
> What is the recommended way to handle such cases besides using
> peripheral_config in dma_slave_config?

First use dma_slave_config() fields, if they are not appropriate, lets
discuss why before we add custom methods or use peripheral_config

--
~Vinod