[PATCH v2 1/2] dt-bindings: display: panel: samsung,atna45dc02: Document ATNA45DC02

[PATCH v2 1/2] dt-bindings: display: panel: samsung,atna45dc02: Document ATNA45DC02

[Rob Clark]

From: Rob Clark <robdclark@chromium.org>

The Samsung ATNA45DC02 panel is an AMOLED eDP panel, similar to the
existing ATNA45AF01 and ATNA33XC20 panel but with a higher resolution.

Signed-off-by: Rob Clark <robdclark@chromium.org>
---
 .../devicetree/bindings/display/panel/samsung,atna33xc20.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
index 5192c93fbd67..3ec9b8c79b5f 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
@@ -21,6 +21,10 @@ properties:
       - items:
           - const: samsung,atna45af01
           - const: samsung,atna33xc20
+      # Samsung 14.5" 3K (2944x1840 pixels) eDP AMOLED panel
+      - items:
+          - const: samsung,atna45dc02
+          - const: samsung,atna33xc20
 
   enable-gpios: true
   port: true
-- 
2.45.2

[PATCH v2 2/2] arm64: dts: qcom: x1e80100-yoga: Update panel bindings

[Rob Clark]

From: Rob Clark <robdclark@chromium.org>

Use the correct panel compatible, and wire up enable-gpio.  It is wired
up in the same way as the x1e80100-crd.

Signed-off-by: Rob Clark <robdclark@chromium.org>
---
 .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts   | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index f569f0fbd1fc..28a6ea5a24fd 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -592,9 +592,13 @@ &mdss_dp3 {
 
 	aux-bus {
 		panel {
-			compatible = "edp-panel";
+			compatible = "samsung,atna45dc02", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
 			power-supply = <&vreg_edp_3p3>;
 
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
 			port {
 				edp_panel_in: endpoint {
 					remote-endpoint = <&mdss_dp3_out>;
@@ -663,6 +667,13 @@ &pcie6a_phy {
 	status = "okay";
 };
 
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+	};
+};
+
 &qupv3_0 {
 	status = "okay";
 };
-- 
2.45.2

Re: [PATCH v2 2/2] arm64: dts: qcom: x1e80100-yoga: Update panel bindings

[Abel Vesa]

On 24-07-19 11:52:50, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> Use the correct panel compatible, and wire up enable-gpio.  It is wired
> up in the same way as the x1e80100-crd.
> 
> Signed-off-by: Rob Clark <robdclark@chromium.org>

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>

> ---
>  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts   | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> index f569f0fbd1fc..28a6ea5a24fd 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> @@ -592,9 +592,13 @@ &mdss_dp3 {
>  
>  	aux-bus {
>  		panel {
> -			compatible = "edp-panel";
> +			compatible = "samsung,atna45dc02", "samsung,atna33xc20";
> +			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
>  			power-supply = <&vreg_edp_3p3>;
>  
> +			pinctrl-0 = <&edp_bl_en>;
> +			pinctrl-names = "default";
> +
>  			port {
>  				edp_panel_in: endpoint {
>  					remote-endpoint = <&mdss_dp3_out>;
> @@ -663,6 +667,13 @@ &pcie6a_phy {
>  	status = "okay";
>  };
>  
> +&pmc8380_3_gpios {
> +	edp_bl_en: edp-bl-en-state {
> +		pins = "gpio4";
> +		function = "normal";
> +	};
> +};
> +
>  &qupv3_0 {
>  	status = "okay";
>  };
> -- 
> 2.45.2
> 

Re: [PATCH v2 2/2] arm64: dts: qcom: x1e80100-yoga: Update panel bindings

[Stephan Gerhold]

On Fri, Jul 19, 2024 at 11:52:50AM -0700, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> Use the correct panel compatible, and wire up enable-gpio.  It is wired
> up in the same way as the x1e80100-crd.
> 
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
>  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts   | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> index f569f0fbd1fc..28a6ea5a24fd 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> @@ -592,9 +592,13 @@ &mdss_dp3 {
>  
>  	aux-bus {
>  		panel {
> -			compatible = "edp-panel";
> +			compatible = "samsung,atna45dc02", "samsung,atna33xc20";
> +			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
>  			power-supply = <&vreg_edp_3p3>;
>  
> +			pinctrl-0 = <&edp_bl_en>;
> +			pinctrl-names = "default";
> +
>  			port {
>  				edp_panel_in: endpoint {
>  					remote-endpoint = <&mdss_dp3_out>;
> @@ -663,6 +667,13 @@ &pcie6a_phy {
>  	status = "okay";
>  };
>  
> +&pmc8380_3_gpios {
> +	edp_bl_en: edp-bl-en-state {
> +		pins = "gpio4";
> +		function = "normal";
> +	};

Did you omit the "power-source" here on purpose? It works without
because the firmware already configures this pin, but ideally we should
provide the full configuration.

In /sys/kernel/debug/gpio you can check how the firmware has configured
the pin. It is probably exactly the same as for the CRD.

Thanks,
Stephan

Re: [PATCH v2 2/2] arm64: dts: qcom: x1e80100-yoga: Update panel bindings

[Rob Clark]

On Mon, Jul 22, 2024 at 12:15 AM Stephan Gerhold
<stephan.gerhold@linaro.org> wrote:
>
> On Fri, Jul 19, 2024 at 11:52:50AM -0700, Rob Clark wrote:
> > From: Rob Clark <robdclark@chromium.org>
> >
> > Use the correct panel compatible, and wire up enable-gpio.  It is wired
> > up in the same way as the x1e80100-crd.
> >
> > Signed-off-by: Rob Clark <robdclark@chromium.org>
> > ---
> >  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts   | 13 ++++++++++++-
> >  1 file changed, 12 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > index f569f0fbd1fc..28a6ea5a24fd 100644
> > --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > @@ -592,9 +592,13 @@ &mdss_dp3 {
> >
> >       aux-bus {
> >               panel {
> > -                     compatible = "edp-panel";
> > +                     compatible = "samsung,atna45dc02", "samsung,atna33xc20";
> > +                     enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
> >                       power-supply = <&vreg_edp_3p3>;
> >
> > +                     pinctrl-0 = <&edp_bl_en>;
> > +                     pinctrl-names = "default";
> > +
> >                       port {
> >                               edp_panel_in: endpoint {
> >                                       remote-endpoint = <&mdss_dp3_out>;
> > @@ -663,6 +667,13 @@ &pcie6a_phy {
> >       status = "okay";
> >  };
> >
> > +&pmc8380_3_gpios {
> > +     edp_bl_en: edp-bl-en-state {
> > +             pins = "gpio4";
> > +             function = "normal";
> > +     };
>
> Did you omit the "power-source" here on purpose? It works without
> because the firmware already configures this pin, but ideally we should
> provide the full configuration.

I just copied the CRD.. other than the panel, things appear to be
wired up in the same way.

BR,
-R

> In /sys/kernel/debug/gpio you can check how the firmware has configured
> the pin. It is probably exactly the same as for the CRD.
>
> Thanks,
> Stephan

Re: [PATCH v2 2/2] arm64: dts: qcom: x1e80100-yoga: Update panel bindings

[Stephan Gerhold]

On Mon, Jul 22, 2024 at 07:37:05AM -0700, Rob Clark wrote:
> On Mon, Jul 22, 2024 at 12:15 AM Stephan Gerhold
> <stephan.gerhold@linaro.org> wrote:
> >
> > On Fri, Jul 19, 2024 at 11:52:50AM -0700, Rob Clark wrote:
> > > From: Rob Clark <robdclark@chromium.org>
> > >
> > > Use the correct panel compatible, and wire up enable-gpio.  It is wired
> > > up in the same way as the x1e80100-crd.
> > >
> > > Signed-off-by: Rob Clark <robdclark@chromium.org>
> > > ---
> > >  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts   | 13 ++++++++++++-
> > >  1 file changed, 12 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > > index f569f0fbd1fc..28a6ea5a24fd 100644
> > > --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > > @@ -592,9 +592,13 @@ &mdss_dp3 {
> > >
> > >       aux-bus {
> > >               panel {
> > > -                     compatible = "edp-panel";
> > > +                     compatible = "samsung,atna45dc02", "samsung,atna33xc20";
> > > +                     enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
> > >                       power-supply = <&vreg_edp_3p3>;
> > >
> > > +                     pinctrl-0 = <&edp_bl_en>;
> > > +                     pinctrl-names = "default";
> > > +
> > >                       port {
> > >                               edp_panel_in: endpoint {
> > >                                       remote-endpoint = <&mdss_dp3_out>;
> > > @@ -663,6 +667,13 @@ &pcie6a_phy {
> > >       status = "okay";
> > >  };
> > >
> > > +&pmc8380_3_gpios {
> > > +     edp_bl_en: edp-bl-en-state {
> > > +             pins = "gpio4";
> > > +             function = "normal";
> > > +     };
> >
> > Did you omit the "power-source" here on purpose? It works without
> > because the firmware already configures this pin, but ideally we should
> > provide the full configuration.
> 
> I just copied the CRD.. other than the panel, things appear to be
> wired up in the same way.
> 

It looks like Abel has an older version of my patch in his tree. The
patch that I sent upstream has the "power-source":

https://lore.kernel.org/linux-arm-msm/20240715-x1e80100-crd-backlight-v2-3-31b7f2f658a3@linaro.org/

Can you copy it from there?

Thanks,
Stephan

Re: [PATCH v2 1/2] dt-bindings: display: panel: samsung,atna45dc02: Document ATNA45DC02

[Krzysztof Kozlowski]

On 19/07/2024 20:52, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> The Samsung ATNA45DC02 panel is an AMOLED eDP panel, similar to the
> existing ATNA45AF01 and ATNA33XC20 panel but with a higher resolution.
> 
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
>  .../devicetree/bindings/display/panel/samsung,atna33xc20.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
> index 5192c93fbd67..3ec9b8c79b5f 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
> @@ -21,6 +21,10 @@ properties:
>        - items:
>            - const: samsung,atna45af01
>            - const: samsung,atna33xc20
> +      # Samsung 14.5" 3K (2944x1840 pixels) eDP AMOLED panel
> +      - items:
> +          - const: samsung,atna45dc02

This should be just enum of above entry (the first compatible).


Best regards,
Krzysztof

Re: [PATCH v2 1/2] dt-bindings: display: panel: samsung,atna45dc02: Document ATNA45DC02

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 365 bytes --]

On Fri, Jul 19, 2024 at 11:52:49AM -0700, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> The Samsung ATNA45DC02 panel is an AMOLED eDP panel, similar to the
> existing ATNA45AF01 and ATNA33XC20 panel but with a higher resolution.
> 
> Signed-off-by: Rob Clark <robdclark@chromium.org>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]