From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-oi1-f179.google.com (mail-oi1-f179.google.com [209.85.167.179]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id BC92422313; Sun, 14 Jul 2024 22:16:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.179 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720995415; cv=none; b=eZeoiIHeYAfyj9PY/1EplTs1/OJ1iegwk0gmPjIU13Z5PESDKPtE4ztOHWM19jNghqEl0yXaNYEbKje8SkRDMX7Jxvb78U06oOVDMXFb/CzdrViQ013YGBbFdiMD6KVWqwjA7GNjko1WEObKC5gnWEOOdA/2MoBKOP4cROc/AUw= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720995415; c=relaxed/simple; bh=eYgSZLzmim8PZvR8yGXfyMWT6VkEb/g39AmRmQKoRsw=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=Bieb0vEwTgE9CYt0ZjB0FIelQ7qcLD/MIVAlVwET1X+aGiD4piBF/Nw77nPN/kus0/sZzv6PHCpDz5FqiqT6FpwRaowjPnP43V7Josoq9UAPX8WbTu3aQj2jDNZyLQnvVRCMI2FSL+39ArtgM/II6hPP52YvIsl8x392Z+Pnbzw= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=IljPi8Rk; arc=none smtp.client-ip=209.85.167.179 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="IljPi8Rk" Received: by mail-oi1-f179.google.com with SMTP id 5614622812f47-3d9e13ef8edso2416585b6e.2; Sun, 14 Jul 2024 15:16:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1720995413; x=1721600213; darn=vger.kernel.org; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:from:to:cc:subject:date:message-id:reply-to; bh=Pmqq4n5CIZ0JQxKe2t7vhP02GD4OjQVV2coVsMa2CVA=; b=IljPi8RkhWbTeVvXavCoPEfkIGdmTrtPP8yLrNdOl3K6f95G4bA0DutK3TmyJ1rHhO T186A4F447QnwDg0I1kC2JW7GgN0CHfEsiR0bp090KhM/6gdpqNaMZa9vLJgKma2EX+W aCti3rcBxq3RTAwWo2v5D87LrYQtJ+jcO0a1yhLoqtB4MSUSmyOoB79R+btSNH2KbhW1 Mp5LCB3jgpHAfVkVaSIjB5Ym/ugF0+Pu8zkR2O08lTC+Qz54O5R93B8EAY2G9ouCIrdt UIEfXULog2QYLv41wr0CwqrDqwVUTt2z32PkvX8xtACO5E6O5g0jQDRzJuoSApH0ffjA 11Sw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720995413; x=1721600213; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=Pmqq4n5CIZ0JQxKe2t7vhP02GD4OjQVV2coVsMa2CVA=; b=ObhuIAaNxe1c+ulIjNYC2rWC1jYxUlpkJvBtmXDQ1CU17NdYcyalLOsenF9iJeCCgj HR5P6ak/uJDNO5ONvnlY7IYUTo86mqg9Zo3vIDwGax1HG2xrRzQs6iDEqRBLoaGfaUFQ wtNYzLfQNg5Ay4HqE1SwJ6dyFF93rDTLZq4GWyyX4A0kxYl/yHHoRAGZrv2BJfAzc1AS lO6vkFThlSbOKxY3QCo5MBgIldFBprE0PUl5F1IwR4mv/rj61JS4ekCM3PZPZyNO9GFo 4YmxFqw3tpb74rIqNTQc811p/nwSa8lxjJ7pweAOj5h0yR0Dm+muNAqYgO8igAPhTPhH AlIw== X-Forwarded-Encrypted: i=1; AJvYcCXlBaFvkV4inMZOU4jId6fNMpMoWJhRn4Xn/TPMa10FxhBLUfrqRevCzt/SLosGlDpbnrPGaGW60sIrC6geLMRhoeA+6yIrbMcdPZnp1uJhfrHptHqclRTI1sxaR6pWr4+EETtAB+/U X-Gm-Message-State: AOJu0YxzBZa09bYBTQoJpjI9xOYdvteIXPMFQ/7HBRnLy9prI0egMWzb swnNPug8tiMz1QCpauXTANO8EIlInkCpq0+V1sM0uTzuKrHtM+p3 X-Google-Smtp-Source: AGHT+IFKgeLio2PihUIGUQPRoH0Qbvva/txY4AJfmXKQNffQwEpfpHZ3kYAEU1KQmyrE2v7uJM5KlQ== X-Received: by 2002:a05:6808:148b:b0:3d9:26d6:c70f with SMTP id 5614622812f47-3d93bee9516mr22216442b6e.7.1720995412520; Sun, 14 Jul 2024 15:16:52 -0700 (PDT) Received: from adam-asahi.team.saronic.dev ([136.41.97.255]) by smtp.gmail.com with ESMTPSA id 5614622812f47-3dab3dc4cc8sm591836b6e.11.2024.07.14.15.16.51 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 14 Jul 2024 15:16:51 -0700 (PDT) Date: Sun, 14 Jul 2024 17:16:50 -0500 From: Adam Rizkalla To: Vasileios Amoiridis Cc: jic23@kernel.org, lars@metafoo.de, petre.rodan@subdimension.ro, mazziesaccount@gmail.com, ak@it-klinger.de, ang.iglesiasg@gmail.com, linus.walleij@linaro.org, tgamblin@baylibre.com, phil@raspberrypi.com, 579lpy@gmail.com, andriy.shevchenko@linux.intel.com, semen.protsenko@linaro.org, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v9 1/3] iio: pressure: bmp280: Generalize read_*() functions Message-ID: References: <20240628171726.124852-1-vassilisamir@gmail.com> <20240628171726.124852-2-vassilisamir@gmail.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20240628171726.124852-2-vassilisamir@gmail.com> On Fri, Jun 28, 2024 at 07:17:24PM +0200, Vasileios Amoiridis wrote: > Add the coefficients for the IIO standard units and the IIO value > inside the chip_info structure. > > Move the calculations for the IIO unit compatibility from inside the > read_{temp,press,humid}() functions and move them to the general > read_raw() function. > > In this way, all the data for the calculation of the value are > located in the chip_info structure of the respective sensor. > > Signed-off-by: Vasileios Amoiridis > --- > drivers/iio/pressure/bmp280-core.c | 168 +++++++++++++++++------------ > drivers/iio/pressure/bmp280.h | 13 ++- > 2 files changed, 108 insertions(+), 73 deletions(-) > > diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c > index 49081b729618..9ff26a8e85d3 100644 > --- a/drivers/iio/pressure/bmp280-core.c > +++ b/drivers/iio/pressure/bmp280-core.c > @@ -445,10 +445,8 @@ static u32 bmp280_compensate_press(struct bmp280_data *data, > return (u32)p; > } > > -static int bmp280_read_temp(struct bmp280_data *data, > - int *val, int *val2) > +static int bmp280_read_temp(struct bmp280_data *data, s32 *comp_temp) > { > - s32 comp_temp; > u32 adc_temp; > int ret; > > @@ -456,16 +454,15 @@ static int bmp280_read_temp(struct bmp280_data *data, > if (ret) > return ret; > > - comp_temp = bmp280_compensate_temp(data, adc_temp); > + *comp_temp = bmp280_compensate_temp(data, adc_temp); > > - *val = comp_temp * 10; > - return IIO_VAL_INT; > + return 0; > } > > -static int bmp280_read_press(struct bmp280_data *data, > - int *val, int *val2) > +static int bmp280_read_press(struct bmp280_data *data, u32 *comp_press) > { > - u32 comp_press, adc_press, t_fine; > + u32 adc_press; > + s32 t_fine; > int ret; > > ret = bmp280_get_t_fine(data, &t_fine); > @@ -476,17 +473,13 @@ static int bmp280_read_press(struct bmp280_data *data, > if (ret) > return ret; > > - comp_press = bmp280_compensate_press(data, adc_press, t_fine); > - > - *val = comp_press; > - *val2 = 256000; > + *comp_press = bmp280_compensate_press(data, adc_press, t_fine); > > - return IIO_VAL_FRACTIONAL; > + return 0; > } > > -static int bme280_read_humid(struct bmp280_data *data, int *val, int *val2) > +static int bme280_read_humid(struct bmp280_data *data, u32 *comp_humidity) > { > - u32 comp_humidity; > u16 adc_humidity; > s32 t_fine; > int ret; > @@ -499,11 +492,9 @@ static int bme280_read_humid(struct bmp280_data *data, int *val, int *val2) > if (ret) > return ret; > > - comp_humidity = bme280_compensate_humidity(data, adc_humidity, t_fine); > - > - *val = comp_humidity * 1000 / 1024; > + *comp_humidity = bme280_compensate_humidity(data, adc_humidity, t_fine); > > - return IIO_VAL_INT; > + return 0; > } > > static int bmp280_read_raw_impl(struct iio_dev *indio_dev, > @@ -511,6 +502,8 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev, > int *val, int *val2, long mask) > { > struct bmp280_data *data = iio_priv(indio_dev); > + int chan_value; > + int ret; > > guard(mutex)(&data->lock); > > @@ -518,11 +511,29 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev, > case IIO_CHAN_INFO_PROCESSED: > switch (chan->type) { > case IIO_HUMIDITYRELATIVE: > - return data->chip_info->read_humid(data, val, val2); > + ret = data->chip_info->read_humid(data, &chan_value); > + if (ret) > + return ret; > + > + *val = data->chip_info->humid_coeffs[0] * chan_value; > + *val2 = data->chip_info->humid_coeffs[1]; > + return data->chip_info->humid_coeffs_type; > case IIO_PRESSURE: > - return data->chip_info->read_press(data, val, val2); > + ret = data->chip_info->read_press(data, &chan_value); > + if (ret) > + return ret; > + > + *val = data->chip_info->press_coeffs[0] * chan_value; > + *val2 = data->chip_info->press_coeffs[1]; > + return data->chip_info->press_coeffs_type; > case IIO_TEMP: > - return data->chip_info->read_temp(data, val, val2); > + ret = data->chip_info->read_temp(data, &chan_value); > + if (ret) > + return ret; > + > + *val = data->chip_info->temp_coeffs[0] * chan_value; > + *val2 = data->chip_info->temp_coeffs[1]; > + return data->chip_info->temp_coeffs_type; > default: > return -EINVAL; > } > @@ -822,6 +833,8 @@ static int bmp280_chip_config(struct bmp280_data *data) > > static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; > static const u8 bmp280_chip_ids[] = { BMP280_CHIP_ID }; > +static const int bmp280_temp_coeffs[] = { 10, 1 }; > +static const int bmp280_press_coeffs[] = { 1, 256000 }; > > const struct bmp280_chip_info bmp280_chip_info = { > .id_reg = BMP280_REG_ID, > @@ -850,6 +863,11 @@ const struct bmp280_chip_info bmp280_chip_info = { > .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), > .oversampling_press_default = BMP280_OSRS_PRESS_16X - 1, > > + .temp_coeffs = bmp280_temp_coeffs, > + .temp_coeffs_type = IIO_VAL_FRACTIONAL, > + .press_coeffs = bmp280_press_coeffs, > + .press_coeffs_type = IIO_VAL_FRACTIONAL, > + > .chip_config = bmp280_chip_config, > .read_temp = bmp280_read_temp, > .read_press = bmp280_read_press, > @@ -877,6 +895,7 @@ static int bme280_chip_config(struct bmp280_data *data) > } > > static const u8 bme280_chip_ids[] = { BME280_CHIP_ID }; > +static const int bme280_humid_coeffs[] = { 1000, 1024 }; > > const struct bmp280_chip_info bme280_chip_info = { > .id_reg = BMP280_REG_ID, > @@ -899,6 +918,13 @@ const struct bmp280_chip_info bme280_chip_info = { > .num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail), > .oversampling_humid_default = BME280_OSRS_HUMIDITY_16X - 1, > > + .temp_coeffs = bmp280_temp_coeffs, > + .temp_coeffs_type = IIO_VAL_FRACTIONAL, > + .press_coeffs = bmp280_press_coeffs, > + .press_coeffs_type = IIO_VAL_FRACTIONAL, > + .humid_coeffs = bme280_humid_coeffs, > + .humid_coeffs_type = IIO_VAL_FRACTIONAL, > + > .chip_config = bme280_chip_config, > .read_temp = bmp280_read_temp, > .read_press = bmp280_read_press, > @@ -1091,9 +1117,8 @@ static u32 bmp380_compensate_press(struct bmp280_data *data, > return comp_press; > } > > -static int bmp380_read_temp(struct bmp280_data *data, int *val, int *val2) > +static int bmp380_read_temp(struct bmp280_data *data, s32 *comp_temp) > { > - s32 comp_temp; > u32 adc_temp; > int ret; > > @@ -1101,15 +1126,14 @@ static int bmp380_read_temp(struct bmp280_data *data, int *val, int *val2) > if (ret) > return ret; > > - comp_temp = bmp380_compensate_temp(data, adc_temp); > + *comp_temp = bmp380_compensate_temp(data, adc_temp); > > - *val = comp_temp * 10; > - return IIO_VAL_INT; > + return 0; > } > > -static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2) > +static int bmp380_read_press(struct bmp280_data *data, u32 *comp_press) > { > - u32 adc_press, comp_press, t_fine; > + u32 adc_press, t_fine; > int ret; > > ret = bmp380_get_t_fine(data, &t_fine); > @@ -1120,12 +1144,9 @@ static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2) > if (ret) > return ret; > > - comp_press = bmp380_compensate_press(data, adc_press, t_fine); > - > - *val = comp_press; > - *val2 = 100000; > + *comp_press = bmp380_compensate_press(data, adc_press, t_fine); > > - return IIO_VAL_FRACTIONAL; > + return 0; > } > > static int bmp380_read_calib(struct bmp280_data *data) > @@ -1296,6 +1317,8 @@ static int bmp380_chip_config(struct bmp280_data *data) > static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 }; > static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128}; > static const u8 bmp380_chip_ids[] = { BMP380_CHIP_ID, BMP390_CHIP_ID }; > +static const int bmp380_temp_coeffs[] = { 10, 1 }; > +static const int bmp380_press_coeffs[] = { 1, 100000 }; > > const struct bmp280_chip_info bmp380_chip_info = { > .id_reg = BMP380_REG_ID, > @@ -1323,6 +1346,11 @@ const struct bmp280_chip_info bmp380_chip_info = { > .num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail), > .iir_filter_coeff_default = 2, > > + .temp_coeffs = bmp380_temp_coeffs, > + .temp_coeffs_type = IIO_VAL_FRACTIONAL, > + .press_coeffs = bmp380_press_coeffs, > + .press_coeffs_type = IIO_VAL_FRACTIONAL, > + > .chip_config = bmp380_chip_config, > .read_temp = bmp380_read_temp, > .read_press = bmp380_read_press, > @@ -1443,9 +1471,9 @@ static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write) > * for what is expected on IIO ABI. > */ > > -static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2) > +static int bmp580_read_temp(struct bmp280_data *data, s32 *raw_temp) > { > - s32 raw_temp; > + s32 value_temp; > int ret; > > ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, data->buf, > @@ -1455,25 +1483,19 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2) > return ret; > } > > - raw_temp = get_unaligned_le24(data->buf); > - if (raw_temp == BMP580_TEMP_SKIPPED) { > + value_temp = get_unaligned_le24(data->buf); > + if (value_temp == BMP580_TEMP_SKIPPED) { > dev_err(data->dev, "reading temperature skipped\n"); > return -EIO; > } > + *raw_temp = sign_extend32(value_temp, 23); > > - /* > - * Temperature is returned in Celsius degrees in fractional > - * form down 2^16. We rescale by x1000 to return millidegrees > - * Celsius to respect IIO ABI. > - */ > - raw_temp = sign_extend32(raw_temp, 23); > - *val = ((s64)raw_temp * 1000) / (1 << 16); > - return IIO_VAL_INT; > + return 0; > } > > -static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) > +static int bmp580_read_press(struct bmp280_data *data, u32 *raw_press) > { > - u32 raw_press; > + u32 value_press; > int ret; > > ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, data->buf, > @@ -1483,18 +1505,14 @@ static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) > return ret; > } > > - raw_press = get_unaligned_le24(data->buf); > - if (raw_press == BMP580_PRESS_SKIPPED) { > + value_press = get_unaligned_le24(data->buf); > + if (value_press == BMP580_PRESS_SKIPPED) { > dev_err(data->dev, "reading pressure skipped\n"); > return -EIO; > } > - /* > - * Pressure is returned in Pascals in fractional form down 2^16. > - * We rescale /1000 to convert to kilopascal to respect IIO ABI. > - */ > - *val = raw_press; > - *val2 = 64000; /* 2^6 * 1000 */ > - return IIO_VAL_FRACTIONAL; > + *raw_press = value_press; > + > + return 0; > } > > static const int bmp580_odr_table[][2] = { > @@ -1830,6 +1848,9 @@ static int bmp580_chip_config(struct bmp280_data *data) > > static const int bmp580_oversampling_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 }; > static const u8 bmp580_chip_ids[] = { BMP580_CHIP_ID, BMP580_CHIP_ID_ALT }; > +/* Instead of { 1000, 16 } we do this, to avoid overflow issues */ > +static const int bmp580_temp_coeffs[] = { 125, 13 }; I'm not really sure what we gain here from using 125/13 instead of 250/14...but I don't think it hurts either. I don't have a way to test this with the latest kernel release currently, but lgtm. Acked-by: Adam Rizkalla > +static const int bmp580_press_coeffs[] = { 1, 64000}; > > const struct bmp280_chip_info bmp580_chip_info = { > .id_reg = BMP580_REG_CHIP_ID, > @@ -1856,6 +1877,11 @@ const struct bmp280_chip_info bmp580_chip_info = { > .num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail), > .iir_filter_coeff_default = 2, > > + .temp_coeffs = bmp580_temp_coeffs, > + .temp_coeffs_type = IIO_VAL_FRACTIONAL_LOG2, > + .press_coeffs = bmp580_press_coeffs, > + .press_coeffs_type = IIO_VAL_FRACTIONAL, > + > .chip_config = bmp580_chip_config, > .read_temp = bmp580_read_temp, > .read_press = bmp580_read_press, > @@ -2011,9 +2037,8 @@ static s32 bmp180_compensate_temp(struct bmp280_data *data, u32 adc_temp) > return (bmp180_calc_t_fine(data, adc_temp) + 8) / 16; > } > > -static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2) > +static int bmp180_read_temp(struct bmp280_data *data, s32 *comp_temp) > { > - s32 comp_temp; > u32 adc_temp; > int ret; > > @@ -2021,10 +2046,9 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2) > if (ret) > return ret; > > - comp_temp = bmp180_compensate_temp(data, adc_temp); > + *comp_temp = bmp180_compensate_temp(data, adc_temp); > > - *val = comp_temp * 100; > - return IIO_VAL_INT; > + return 0; > } > > static int bmp180_read_press_adc(struct bmp280_data *data, u32 *adc_press) > @@ -2087,9 +2111,9 @@ static u32 bmp180_compensate_press(struct bmp280_data *data, u32 adc_press, > return p + ((x1 + x2 + 3791) >> 4); > } > > -static int bmp180_read_press(struct bmp280_data *data, int *val, int *val2) > +static int bmp180_read_press(struct bmp280_data *data, u32 *comp_press) > { > - u32 comp_press, adc_press; > + u32 adc_press; > s32 t_fine; > int ret; > > @@ -2101,12 +2125,9 @@ static int bmp180_read_press(struct bmp280_data *data, int *val, int *val2) > if (ret) > return ret; > > - comp_press = bmp180_compensate_press(data, adc_press, t_fine); > - > - *val = comp_press; > - *val2 = 1000; > + *comp_press = bmp180_compensate_press(data, adc_press, t_fine); > > - return IIO_VAL_FRACTIONAL; > + return 0; > } > > static int bmp180_chip_config(struct bmp280_data *data) > @@ -2117,6 +2138,8 @@ static int bmp180_chip_config(struct bmp280_data *data) > static const int bmp180_oversampling_temp_avail[] = { 1 }; > static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; > static const u8 bmp180_chip_ids[] = { BMP180_CHIP_ID }; > +static const int bmp180_temp_coeffs[] = { 100, 1 }; > +static const int bmp180_press_coeffs[] = { 1, 1000 }; > > const struct bmp280_chip_info bmp180_chip_info = { > .id_reg = BMP280_REG_ID, > @@ -2137,6 +2160,11 @@ const struct bmp280_chip_info bmp180_chip_info = { > ARRAY_SIZE(bmp180_oversampling_press_avail), > .oversampling_press_default = BMP180_MEAS_PRESS_8X, > > + .temp_coeffs = bmp180_temp_coeffs, > + .temp_coeffs_type = IIO_VAL_FRACTIONAL, > + .press_coeffs = bmp180_press_coeffs, > + .press_coeffs_type = IIO_VAL_FRACTIONAL, > + > .chip_config = bmp180_chip_config, > .read_temp = bmp180_read_temp, > .read_press = bmp180_read_press, > diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h > index 7c30e4d523be..a3d2cd722760 100644 > --- a/drivers/iio/pressure/bmp280.h > +++ b/drivers/iio/pressure/bmp280.h > @@ -446,10 +446,17 @@ struct bmp280_chip_info { > int num_sampling_freq_avail; > int sampling_freq_default; > > + const int *temp_coeffs; > + const int temp_coeffs_type; > + const int *press_coeffs; > + const int press_coeffs_type; > + const int *humid_coeffs; > + const int humid_coeffs_type; > + > int (*chip_config)(struct bmp280_data *data); > - int (*read_temp)(struct bmp280_data *data, int *val, int *val2); > - int (*read_press)(struct bmp280_data *data, int *val, int *val2); > - int (*read_humid)(struct bmp280_data *data, int *val, int *val2); > + int (*read_temp)(struct bmp280_data *data, s32 *adc_temp); > + int (*read_press)(struct bmp280_data *data, u32 *adc_press); > + int (*read_humid)(struct bmp280_data *data, u32 *adc_humidity); > int (*read_calib)(struct bmp280_data *data); > int (*preinit)(struct bmp280_data *data); > }; > -- > 2.25.1 >