From: Stephan Gerhold <stephan.gerhold@linaro.org>
To: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org, Abel Vesa <abel.vesa@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Rob Clark <robdclark@chromium.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4] arm64: dts: qcom: x1e80100-yoga: Update panel bindings
Date: Wed, 7 Aug 2024 14:42:31 +0200 [thread overview]
Message-ID: <ZrNrtx1qvPYatpsw@linaro.org> (raw)
In-Reply-To: <20240806202218.9060-1-robdclark@gmail.com>
On Tue, Aug 06, 2024 at 01:22:17PM -0700, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
>
> Use the correct panel compatible, and wire up enable-gpio. It is wired
> up in the same way as the x1e80100-crd.
>
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Thanks for the update!
> ---
> Corresponding schema update is in drm-misc-fixes
>
> [1/2] dt-bindings: display: panel: samsung,atna45dc02: Document ATNA45DC02
> commit: 1c4a057d01f4432704c4dc8842b6e888a91d95df
>
> .../dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> index 70977e9fa266..3c13331a9ef4 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> @@ -190,7 +190,6 @@ vreg_edp_3p3: regulator-edp-3p3 {
> pinctrl-0 = <&edp_reg_en>;
> pinctrl-names = "default";
>
> - regulator-always-on;
> regulator-boot-on;
> };
>
> @@ -592,9 +591,13 @@ &mdss_dp3 {
>
> aux-bus {
> panel {
> - compatible = "edp-panel";
> + compatible = "samsung,atna45dc02", "samsung,atna33xc20";
> + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
> power-supply = <&vreg_edp_3p3>;
>
> + pinctrl-0 = <&edp_bl_en>;
> + pinctrl-names = "default";
> +
> port {
> edp_panel_in: endpoint {
> remote-endpoint = <&mdss_dp3_out>;
> @@ -669,6 +672,16 @@ &pcie6a_phy {
> status = "okay";
> };
>
> +&pmc8380_3_gpios {
> + edp_bl_en: edp-bl-en-state {
> + pins = "gpio4";
> + function = "normal";
> + power-source = <0>;
> + input-disable;
> + output-enable;
> + };
> +};
> +
> &qupv3_0 {
> status = "okay";
> };
> --
> 2.45.2
>
next prev parent reply other threads:[~2024-08-07 12:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-06 20:22 [PATCH v4] arm64: dts: qcom: x1e80100-yoga: Update panel bindings Rob Clark
2024-08-07 12:42 ` Stephan Gerhold [this message]
2024-08-15 20:40 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZrNrtx1qvPYatpsw@linaro.org \
--to=stephan.gerhold@linaro.org \
--cc=abel.vesa@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@chromium.org \
--cc=robdclark@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox