From: Michael Grzeschik <mgr@pengutronix.de>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Scally <dan.scally@ideasonboard.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Avichal Rakesh <arakesh@google.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 06/10] usb: gadget: uvc: set req_size once when the vb2 queue is calculated
Date: Tue, 27 Aug 2024 23:58:53 +0200 [thread overview]
Message-ID: <Zs5MHRMe1b3qDuRJ@pengutronix.de> (raw)
In-Reply-To: <20240813094110.GE19716@pendragon.ideasonboard.com>
[-- Attachment #1: Type: text/plain, Size: 4532 bytes --]
On Tue, Aug 13, 2024 at 12:41:10PM +0300, Laurent Pinchart wrote:
>On Tue, Aug 13, 2024 at 11:09:30AM +0200, Michael Grzeschik wrote:
>> The uvc gadget driver is calculating the req_size on every
>> video_enable/alloc_request and is based on the fixed configfs parameters
>> maxpacket, maxburst and mult.
>>
>> As those parameters can not be changed once the gadget is started and
>> the same calculation is done already early on the
>> vb2_streamon/queue_setup path its save to remove one extra calculation
>> and reuse the calculation from uvc_queue_setup for the allocation step.
>
>Avoiding double calculations is good, but then don't compute the value
>in uvc_queue_setup(). That will also be called multiple times, and its
>timing will be controlled by userspace. Move it to a better location.
I think I was unclear regarding the avoidance of double calculations.
Actually this is the right place to calculate this, since the
resulting req_size will be dependent on the expected imagesize
and the frameduration, we have to calculate it in every queue_setup.
Since this patch is an preperation for the next change, I will leave the
codebase as is but will add the details in the patch description.
Michael
>> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
>>
>> ---
>> v3 -> v4: -
>> v2 -> v3: -
>> v1 -> v2: -
>> ---
>> drivers/usb/gadget/function/uvc_queue.c | 2 ++
>> drivers/usb/gadget/function/uvc_video.c | 15 ++-------------
>> 2 files changed, 4 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
>> index 7995dd3fef184..2414d78b031f4 100644
>> --- a/drivers/usb/gadget/function/uvc_queue.c
>> +++ b/drivers/usb/gadget/function/uvc_queue.c
>> @@ -63,6 +63,8 @@ static int uvc_queue_setup(struct vb2_queue *vq,
>> */
>> nreq = DIV_ROUND_UP(DIV_ROUND_UP(sizes[0], 2), req_size);
>> nreq = clamp(nreq, 4U, 64U);
>> +
>> + video->req_size = req_size;
>> video->uvc_num_requests = nreq;
>>
>> return 0;
>> diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
>> index 259920ae36843..a6786beef91ad 100644
>> --- a/drivers/usb/gadget/function/uvc_video.c
>> +++ b/drivers/usb/gadget/function/uvc_video.c
>> @@ -480,7 +480,6 @@ uvc_video_free_requests(struct uvc_video *video)
>> INIT_LIST_HEAD(&video->ureqs);
>> INIT_LIST_HEAD(&video->req_free);
>> INIT_LIST_HEAD(&video->req_ready);
>> - video->req_size = 0;
>> return 0;
>> }
>>
>> @@ -488,16 +487,9 @@ static int
>> uvc_video_alloc_requests(struct uvc_video *video)
>> {
>> struct uvc_request *ureq;
>> - unsigned int req_size;
>> unsigned int i;
>> int ret = -ENOMEM;
>>
>> - BUG_ON(video->req_size);
>> -
>> - req_size = video->ep->maxpacket
>> - * max_t(unsigned int, video->ep->maxburst, 1)
>> - * (video->ep->mult);
>> -
>> for (i = 0; i < video->uvc_num_requests; i++) {
>> ureq = kzalloc(sizeof(struct uvc_request), GFP_KERNEL);
>> if (ureq == NULL)
>> @@ -507,7 +499,7 @@ uvc_video_alloc_requests(struct uvc_video *video)
>>
>> list_add_tail(&ureq->list, &video->ureqs);
>>
>> - ureq->req_buffer = kmalloc(req_size, GFP_KERNEL);
>> + ureq->req_buffer = kmalloc(video->req_size, GFP_KERNEL);
>> if (ureq->req_buffer == NULL)
>> goto error;
>>
>> @@ -525,12 +517,10 @@ uvc_video_alloc_requests(struct uvc_video *video)
>> list_add_tail(&ureq->req->list, &video->req_free);
>> /* req_size/PAGE_SIZE + 1 for overruns and + 1 for header */
>> sg_alloc_table(&ureq->sgt,
>> - DIV_ROUND_UP(req_size - UVCG_REQUEST_HEADER_LEN,
>> + DIV_ROUND_UP(video->req_size - UVCG_REQUEST_HEADER_LEN,
>> PAGE_SIZE) + 2, GFP_KERNEL);
>> }
>>
>> - video->req_size = req_size;
>> -
>> return 0;
>>
>> error:
>> @@ -663,7 +653,6 @@ uvcg_video_disable(struct uvc_video *video)
>> INIT_LIST_HEAD(&video->ureqs);
>> INIT_LIST_HEAD(&video->req_free);
>> INIT_LIST_HEAD(&video->req_ready);
>> - video->req_size = 0;
>> spin_unlock_irqrestore(&video->req_lock, flags);
>>
>> /*
>
>--
>Regards,
>
>Laurent Pinchart
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2024-08-27 21:59 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-13 9:09 [PATCH v4 00/10] usb: gadget: uvc: effectively fill the udc isoc pipeline with available video buffers Michael Grzeschik
2024-08-13 9:09 ` [PATCH v4 01/10] usb: gadget: uvc: always set interrupt on zero length requests Michael Grzeschik
2024-08-13 9:17 ` Laurent Pinchart
2024-08-13 9:09 ` [PATCH v4 02/10] usb: gadget: uvc: only enqueue zero length requests in potential underrun Michael Grzeschik
2024-08-13 9:09 ` [PATCH v4 03/10] usb: gadget: uvc: remove pump worker and enqueue all buffers per frame in qbuf Michael Grzeschik
2024-08-13 9:09 ` [PATCH v4 04/10] usb: gadget: uvc: rework to enqueue in pump worker from encoded queue Michael Grzeschik
2024-08-13 9:09 ` [PATCH v4 05/10] usb: gadget: uvc: remove uvc_video_ep_queue_initial_requests Michael Grzeschik
2024-08-13 9:09 ` [PATCH v4 06/10] usb: gadget: uvc: set req_size once when the vb2 queue is calculated Michael Grzeschik
2024-08-13 9:41 ` Laurent Pinchart
2024-08-27 21:58 ` Michael Grzeschik [this message]
2024-08-13 9:09 ` [PATCH v4 07/10] usb: gadget: uvc: add g_parm and s_parm for frame interval Michael Grzeschik
2024-08-13 9:22 ` Laurent Pinchart
2024-08-13 9:28 ` Laurent Pinchart
2024-08-13 10:27 ` Michael Grzeschik
2024-08-13 10:34 ` Laurent Pinchart
2024-08-13 9:09 ` [PATCH v4 08/10] usb: gadget: uvc: set req_size and n_requests based on the " Michael Grzeschik
2024-08-13 9:09 ` [PATCH v4 09/10] usb: gadget: uvc: set req_length based on payload by nreqs instead of req_size Michael Grzeschik
2024-08-13 9:09 ` [PATCH v4 10/10] usb: gadget: uvc: add min g_ctrl vidioc and set min buffs to 4 Michael Grzeschik
2024-08-13 9:35 ` Laurent Pinchart
2024-08-13 9:56 ` [PATCH v4 00/10] usb: gadget: uvc: effectively fill the udc isoc pipeline with available video buffers Greg Kroah-Hartman
2024-08-13 10:01 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zs5MHRMe1b3qDuRJ@pengutronix.de \
--to=mgr@pengutronix.de \
--cc=arakesh@google.com \
--cc=dan.scally@ideasonboard.com \
--cc=gregkh@linuxfoundation.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox