From: "Guido Günther" <agx@sigxcpu.org>
To: Tejas Vipin <tejasvipin76@gmail.com>
Cc: kernel@puri.sm, neil.armstrong@linaro.org, dianders@chromium.org,
quic_jesszhan@quicinc.com, maarten.lankhorst@linux.intel.com,
mripard@kernel.org, tzimmermann@suse.de, airlied@gmail.com,
daniel@ffwll.ch, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drm/panel: mantix-mlaf057we51: transition to mipi_dsi wrapped functions
Date: Mon, 19 Aug 2024 18:36:36 +0200 [thread overview]
Message-ID: <ZsN0lImmU8PTxuLB@qwark.sigxcpu.org> (raw)
In-Reply-To: <20240818072356.870465-1-tejasvipin76@gmail.com>
Hi,
On Sun, Aug 18, 2024 at 12:53:56PM +0530, Tejas Vipin wrote:
> Changes the mantix-mlaf057we51 panel to use multi style functions for
> improved error handling.
>
> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
> ---
> .../gpu/drm/panel/panel-mantix-mlaf057we51.c | 79 +++++++------------
> 1 file changed, 27 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
> index ea4a6bf6d35b..4db852ffb0f6 100644
> --- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
> +++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
> @@ -23,7 +23,7 @@
>
> /* Manufacturer specific Commands send via DSI */
> #define MANTIX_CMD_OTP_STOP_RELOAD_MIPI 0x41
> -#define MANTIX_CMD_INT_CANCEL 0x4C
> +#define MANTIX_CMD_INT_CANCEL 0x4c
> #define MANTIX_CMD_SPI_FINISH 0x90
>
> struct mantix {
> @@ -45,82 +45,57 @@ static inline struct mantix *panel_to_mantix(struct drm_panel *panel)
> return container_of(panel, struct mantix, panel);
> }
>
> -static int mantix_init_sequence(struct mantix *ctx)
> +static void mantix_init_sequence(struct mipi_dsi_multi_context *dsi_ctx)
> {
> - struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> - struct device *dev = ctx->dev;
> -
> /*
> * Init sequence was supplied by the panel vendor.
> */
> - mipi_dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A);
> -
> - mipi_dsi_generic_write_seq(dsi, MANTIX_CMD_INT_CANCEL, 0x03);
> - mipi_dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A, 0x03);
> - mipi_dsi_generic_write_seq(dsi, 0x80, 0xA9, 0x00);
> + mipi_dsi_generic_write_seq_multi(dsi_ctx, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5a);
>
> - mipi_dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5A, 0x09);
> - mipi_dsi_generic_write_seq(dsi, 0x80, 0x64, 0x00, 0x64, 0x00, 0x00);
> - msleep(20);
> + mipi_dsi_generic_write_seq_multi(dsi_ctx, MANTIX_CMD_INT_CANCEL, 0x03);
> + mipi_dsi_generic_write_seq_multi(dsi_ctx, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5a, 0x03);
> + mipi_dsi_generic_write_seq_multi(dsi_ctx, 0x80, 0xa9, 0x00);
>
> - mipi_dsi_generic_write_seq(dsi, MANTIX_CMD_SPI_FINISH, 0xA5);
> - mipi_dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x00, 0x2F);
> - msleep(20);
> + mipi_dsi_generic_write_seq_multi(dsi_ctx, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x5a, 0x09);
> + mipi_dsi_generic_write_seq_multi(dsi_ctx, 0x80, 0x64, 0x00, 0x64, 0x00, 0x00);
> + mipi_dsi_msleep(dsi_ctx, 20);
>
> - dev_dbg(dev, "Panel init sequence done\n");
> - return 0;
> + mipi_dsi_generic_write_seq_multi(dsi_ctx, MANTIX_CMD_SPI_FINISH, 0xa5);
> + mipi_dsi_generic_write_seq_multi(dsi_ctx, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x00, 0x2f);
> + mipi_dsi_msleep(dsi_ctx, 20);
> }
>
> static int mantix_enable(struct drm_panel *panel)
> {
> struct mantix *ctx = panel_to_mantix(panel);
> - struct device *dev = ctx->dev;
> - struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
> - int ret;
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>
> - ret = mantix_init_sequence(ctx);
> - if (ret < 0) {
> - dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
> - return ret;
> - }
> + mantix_init_sequence(&dsi_ctx);
> + if (!dsi_ctx.accum_err)
> + dev_dbg(ctx->dev, "Panel init sequence done\n");
>
> - ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> - if (ret < 0) {
> - dev_err(dev, "Failed to exit sleep mode\n");
> - return ret;
> - }
> - msleep(20);
> + mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, 20);
>
> - ret = mipi_dsi_dcs_set_display_on(dsi);
> - if (ret)
> - return ret;
> - usleep_range(10000, 12000);
> + mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
> + mipi_dsi_usleep_range(&dsi_ctx, 10000, 12000);
>
> - ret = mipi_dsi_turn_on_peripheral(dsi);
> - if (ret < 0) {
> - dev_err(dev, "Failed to turn on peripheral\n");
> - return ret;
> - }
> + mipi_dsi_turn_on_peripheral_multi(&dsi_ctx);
>
> - return 0;
> + return dsi_ctx.accum_err;
> }
>
> static int mantix_disable(struct drm_panel *panel)
> {
> struct mantix *ctx = panel_to_mantix(panel);
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> - int ret;
> -
> - ret = mipi_dsi_dcs_set_display_off(dsi);
> - if (ret < 0)
> - dev_err(ctx->dev, "Failed to turn off the display: %d\n", ret);
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>
> - ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> - if (ret < 0)
> - dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
> + mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
> + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
>
> -
> - return 0;
> + return dsi_ctx.accum_err;
> }
>
> static int mantix_unprepare(struct drm_panel *panel)
Reviewed-by: Guido Günther <agx@sigxcpu.org>
The split out of cleanups as suggested by Neil would be nice though)
Cheers,
-- Guido
> --
> 2.46.0
>
prev parent reply other threads:[~2024-08-19 16:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-18 7:23 [PATCH] drm/panel: mantix-mlaf057we51: transition to mipi_dsi wrapped functions Tejas Vipin
2024-08-19 15:36 ` neil.armstrong
2024-08-19 16:14 ` Doug Anderson
2024-08-19 16:38 ` neil.armstrong
2024-08-19 16:29 ` Doug Anderson
2024-08-19 16:36 ` Guido Günther [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZsN0lImmU8PTxuLB@qwark.sigxcpu.org \
--to=agx@sigxcpu.org \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@puri.sm \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=tejasvipin76@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox