Re: [PATCH v3] usb: typec: ucsi: Fix busy loop on ASUS VivoBooks

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

On Tue, Sep 03, 2024 at 08:19:17PM +0200, Christian A. Ehrhardt wrote:
> If the busy indicator is set, all other fields in CCI should be
> clear according to the spec. However, some UCSI implementations do
> not follow this rule and report bogus data in CCI along with the
> busy indicator. Ignore the contents of CCI if the busy indicator is
> set.
> 
> If a command timeout is hit it is possible that the EVENT_PENDING
> bit is cleared while connector work is still scheduled which can
> cause the EVENT_PENDING bit to go out of sync with scheduled connector
> work. Check and set the EVENT_PENDING bit on entry to
> ucsi_handle_connector_change() to fix this.
> 
> Reported-by: Anurag Bijea <icaliberdev@gmail.com>
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219108
> Bisected-by: Christian Heusel <christian@heusel.eu>
> Tested-by: Anurag Bijea <icaliberdev@gmail.com>
> Fixes: de52aca4d9d5 ("usb: typec: ucsi: Never send a lone connector change ack")
> Cc: stable@vger.kernel.org
> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
> ---
>  drivers/usb/typec/ucsi/ucsi.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index 4039851551c1..540cb1d2822c 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -38,6 +38,10 @@
>  
>  void ucsi_notify_common(struct ucsi *ucsi, u32 cci)
>  {
> +	/* Ignore bogus data in CCI if busy indicator is set. */
> +	if (cci & UCSI_CCI_BUSY)
> +		return;

I started testing this and it looks like the commands never get
cancelled when the BUSY bit is set. I don't think this patch is the
problem, though. I think the BUSY handling broke earlier, probable in
5e9c1662a89b ("usb: typec: ucsi: rework command execution functions").

I need to look at this a bit more carefully, but in the meantime, can
you try this:

	if (cci & UCSI_CCI_BUSY) {
		complete(&ucsi->complete);
		return;
        }

>  	if (UCSI_CCI_CONNECTOR(cci))
>  		ucsi_connector_change(ucsi, UCSI_CCI_CONNECTOR(cci));
>  

thanks,

-- 
heikki