[PATCH sched_ext/for-6.12-fixes] sched_ext: Improve error reporting during loading

[PATCH sched_ext/for-6.12-fixes] sched_ext: Improve error reporting during loading

[Tejun Heo]

When the BPF scheduler fails, ops.exit() allows rich error reporting through
scx_exit_info. Use scx.exit() path consistently for all failures which can
be caused by the BPF scheduler:

- scx_ops_error() is called after ops.init() and ops.cgroup_init() failure
  to record error information.

- ops.init_task() failure now uses scx_ops_error() instead of pr_err().

- The err_disable path updated to automatically trigger scx_ops_error() to
  cover cases that the error message hasn't already been generated and
  always return 0 indicating init success so that the error is reported
  through ops.exit().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Andrea Righi <andrea.righi@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
---
 kernel/sched/ext.c |   30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

--- a/kernel/sched/ext.c
+++ b/kernel/sched/ext.c
@@ -625,6 +625,10 @@ struct sched_ext_ops {
 	/**
 	 * exit - Clean up after the BPF scheduler
 	 * @info: Exit info
+	 *
+	 * ops.exit() is also called on ops.init() failure, which is a bit
+	 * unusual. This is to allow rich reporting through @info on how
+	 * ops.init() failed.
 	 */
 	void (*exit)(struct scx_exit_info *info);
 
@@ -4184,6 +4188,7 @@ static int scx_cgroup_init(void)
 				      css->cgroup, &args);
 		if (ret) {
 			css_put(css);
+			scx_ops_error("ops.cgroup_init() failed (%d)", ret);
 			return ret;
 		}
 		tg->scx_flags |= SCX_TG_INITED;
@@ -5108,6 +5113,7 @@ static int scx_ops_enable(struct sched_e
 		if (ret) {
 			ret = ops_sanitize_err("init", ret);
 			cpus_read_unlock();
+			scx_ops_error("ops.init() failed (%d)", ret);
 			goto err_disable;
 		}
 	}
@@ -5217,8 +5223,8 @@ static int scx_ops_enable(struct sched_e
 			spin_lock_irq(&scx_tasks_lock);
 			scx_task_iter_exit(&sti);
 			spin_unlock_irq(&scx_tasks_lock);
-			pr_err("sched_ext: ops.init_task() failed (%d) for %s[%d] while loading\n",
-			       ret, p->comm, p->pid);
+			scx_ops_error("ops.init_task() failed (%d) for %s[%d]",
+				      ret, p->comm, p->pid);
 			goto err_disable_unlock_all;
 		}
 
@@ -5266,14 +5272,8 @@ static int scx_ops_enable(struct sched_e
 
 	scx_ops_bypass(false);
 
-	/*
-	 * Returning an error code here would lose the recorded error
-	 * information. Exit indicating success so that the error is notified
-	 * through ops.exit() with all the details.
-	 */
 	if (!scx_ops_tryset_enable_state(SCX_OPS_ENABLED, SCX_OPS_ENABLING)) {
 		WARN_ON_ONCE(atomic_read(&scx_exit_kind) == SCX_EXIT_NONE);
-		ret = 0;
 		goto err_disable;
 	}
 
@@ -5308,10 +5308,18 @@ err_disable_unlock_all:
 	scx_ops_bypass(false);
 err_disable:
 	mutex_unlock(&scx_ops_enable_mutex);
-	/* must be fully disabled before returning */
-	scx_ops_disable(SCX_EXIT_ERROR);
+	/*
+	 * Returning an error code here would not pass all the error information
+	 * to userspace. Record errno using scx_ops_error() for cases
+	 * scx_ops_error() wasn't already invoked and exit indicating success so
+	 * that the error is notified through ops.exit() with all the details.
+	 *
+	 * Flush scx_ops_disable_work to ensure that error is reported before
+	 * init completion.
+	 */
+	scx_ops_error("scx_ops_enable() failed (%d)", ret);
 	kthread_flush_work(&scx_ops_disable_work);
-	return ret;
+	return 0;
 }

Re: [PATCH sched_ext/for-6.12-fixes] sched_ext: Improve error reporting during loading

[Tejun Heo]

On Wed, Oct 02, 2024 at 10:33:37AM -1000, Tejun Heo wrote:
> When the BPF scheduler fails, ops.exit() allows rich error reporting through
> scx_exit_info. Use scx.exit() path consistently for all failures which can
> be caused by the BPF scheduler:
> 
> - scx_ops_error() is called after ops.init() and ops.cgroup_init() failure
>   to record error information.
> 
> - ops.init_task() failure now uses scx_ops_error() instead of pr_err().
> 
> - The err_disable path updated to automatically trigger scx_ops_error() to
>   cover cases that the error message hasn't already been generated and
>   always return 0 indicating init success so that the error is reported
>   through ops.exit().
> 
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: David Vernet <void@manifault.com>
> Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
> Cc: Changwoo Min <multics69@gmail.com>
> Cc: Andrea Righi <andrea.righi@linux.dev>
> Cc: Dan Schatzberg <schatzberg.dan@gmail.com>

Applied to sched_ext/for-6.12-fixes.

Thanks.

-- 
tejun