From: Louis Chauvet <louis.chauvet@bootlin.com>
To: "Maíra Canal" <mairacanal@riseup.net>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>,
Melissa Wen <melissa.srw@gmail.com>,
Haneen Mohammed <hamohammed.sa@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Simona Vetter <simona.vetter@ffwll.ch>,
dri-devel@lists.freedesktop.org, arthurgrillo@riseup.net,
linux-kernel@vger.kernel.org, jeremie.dautheribes@bootlin.com,
miquel.raynal@bootlin.com, thomas.petazzoni@bootlin.com,
seanpaul@google.com, marcheu@google.com,
nicolejadeyee@google.com,
20241007-yuv-v12-0-01c1ada6fec8@bootlin.com
Subject: Re: [PATCH RESEND v2 2/8] drm/vkms: Add support for ARGB8888 formats
Date: Mon, 28 Oct 2024 10:50:34 +0100 [thread overview]
Message-ID: <Zx9eateq0ylJGvS_@fedora> (raw)
In-Reply-To: <40c85513-6c57-4b9c-87f6-2ca56c556462@riseup.net>
On 26/10/24 - 11:11, Maíra Canal wrote:
> Hi Louis,
>
> On 07/10/24 13:46, Louis Chauvet wrote:
> > The formats XRGB8888 and ARGB8888 were already supported.
> > Add the support for:
> > - XBGR8888
> > - RGBX8888
> > - BGRX8888
> > - ABGR8888
> > - RGBA8888
> > - BGRA8888
> >
> > Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
> > ---
> > drivers/gpu/drm/vkms/vkms_formats.c | 18 ++++++++++++++++++
> > drivers/gpu/drm/vkms/vkms_plane.c | 6 ++++++
> > 2 files changed, 24 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/vkms/vkms_formats.c b/drivers/gpu/drm/vkms/vkms_formats.c
> > index 8f1bcca38148..b5a38f70c62b 100644
> > --- a/drivers/gpu/drm/vkms/vkms_formats.c
> > +++ b/drivers/gpu/drm/vkms/vkms_formats.c
> > @@ -432,8 +432,14 @@ static void R4_read_line(const struct vkms_plane_state *plane, int x_start,
> > READ_LINE_ARGB8888(XRGB8888_read_line, px, 255, px[2], px[1], px[0])
> > +READ_LINE_ARGB8888(XBGR8888_read_line, px, 255, px[0], px[1], px[2]) > +READ_LINE_ARGB8888(RGBX8888_read_line, px, 255, px[3], px[2], px[1])
>
> I'm not expert in colors, but is this correct? From what I understand,
> it should be:
Yes, this is correct, READ_LINE_ARGB8888 take the parameters as A, R, G,
B, so here 0xFF, px[2], px[1], px[0]
> READ_LINE_ARGB8888(RGBX8888_read_line, px, px[2], px[1], px[0], 255)
> ^R ^G ^B ^X
>
> > +READ_LINE_ARGB8888(BGRX8888_read_line, px, 255, px[1], px[2], px[3])
>
> Again, is this correct?
>
> Best Regards,
> - Maíra
>
> > READ_LINE_ARGB8888(ARGB8888_read_line, px, px[3], px[2], px[1], px[0])
> > +READ_LINE_ARGB8888(ABGR8888_read_line, px, px[3], px[0], px[1], px[2])
> > +READ_LINE_ARGB8888(RGBA8888_read_line, px, px[0], px[3], px[2], px[1])
> > +READ_LINE_ARGB8888(BGRA8888_read_line, px, px[0], px[1], px[2], px[3])
> > READ_LINE_16161616(ARGB16161616_read_line, px, px[3], px[2], px[1], px[0]);
> > @@ -637,8 +643,20 @@ pixel_read_line_t get_pixel_read_line_function(u32 format)
> > switch (format) {
> > case DRM_FORMAT_ARGB8888:
> > return &ARGB8888_read_line;
> > + case DRM_FORMAT_ABGR8888:
> > + return &ABGR8888_read_line;
> > + case DRM_FORMAT_BGRA8888:
> > + return &BGRA8888_read_line;
> > + case DRM_FORMAT_RGBA8888:
> > + return &RGBA8888_read_line;
> > case DRM_FORMAT_XRGB8888:
> > return &XRGB8888_read_line;
> > + case DRM_FORMAT_XBGR8888:
> > + return &XBGR8888_read_line;
> > + case DRM_FORMAT_RGBX8888:
> > + return &RGBX8888_read_line;
> > + case DRM_FORMAT_BGRX8888:
> > + return &BGRX8888_read_line;
> > case DRM_FORMAT_ARGB16161616:
> > return &ARGB16161616_read_line;
> > case DRM_FORMAT_XRGB16161616:
> > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> > index 67f891e7ac58..941a6e92a040 100644
> > --- a/drivers/gpu/drm/vkms/vkms_plane.c
> > +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> > @@ -14,7 +14,13 @@
> > static const u32 vkms_formats[] = {
> > DRM_FORMAT_ARGB8888,
> > + DRM_FORMAT_ABGR8888,
> > + DRM_FORMAT_BGRA8888,
> > + DRM_FORMAT_RGBA8888,
> > DRM_FORMAT_XRGB8888,
> > + DRM_FORMAT_XBGR8888,
> > + DRM_FORMAT_RGBX8888,
> > + DRM_FORMAT_BGRX8888,
> > DRM_FORMAT_XRGB16161616,
> > DRM_FORMAT_ARGB16161616,
> > DRM_FORMAT_RGB565,
> >
next prev parent reply other threads:[~2024-10-28 9:50 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-07 16:46 [PATCH RESEND v2 0/8] drm/vkms: Add support for multiple plane formats Louis Chauvet
2024-10-07 16:46 ` [PATCH RESEND v2 1/8] drm/vkms: Create helpers macro to avoid code duplication in format callbacks Louis Chauvet
2024-10-26 14:29 ` Maíra Canal
2024-10-28 9:50 ` Louis Chauvet
2024-10-26 14:58 ` Maíra Canal
2024-10-28 9:50 ` Louis Chauvet
2024-10-07 16:46 ` [PATCH RESEND v2 2/8] drm/vkms: Add support for ARGB8888 formats Louis Chauvet
2024-10-26 14:11 ` Maíra Canal
2024-10-28 9:50 ` Louis Chauvet [this message]
2024-10-28 10:20 ` Maíra Canal
2024-10-28 10:39 ` Louis Chauvet
2024-10-07 16:46 ` [PATCH RESEND v2 3/8] drm/vkms: Add support for ARGB16161616 formats Louis Chauvet
2024-10-26 14:15 ` Maíra Canal
2024-10-28 9:50 ` Louis Chauvet
2024-10-07 16:46 ` [PATCH RESEND v2 4/8] drm/vkms: Add support for RGB565 formats Louis Chauvet
2024-10-26 14:17 ` Maíra Canal
2024-10-28 9:50 ` Louis Chauvet
2024-10-07 16:46 ` [PATCH RESEND v2 5/8] drm/vkms: Add support for RGB888 formats Louis Chauvet
2024-10-26 14:51 ` Maíra Canal
2024-10-28 9:50 ` Louis Chauvet
2024-10-28 10:39 ` Maíra Canal
2024-10-07 16:46 ` [PATCH RESEND v2 6/8] drm/vkms: Change YUV helpers to support u16 inputs for conversion Louis Chauvet
2024-10-07 16:46 ` [PATCH RESEND v2 7/8] drm/vkms: Create helper macro for YUV formats Louis Chauvet
2024-10-07 16:46 ` [PATCH RESEND v2 8/8] drm/vkms: Add P01* formats Louis Chauvet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zx9eateq0ylJGvS_@fedora \
--to=louis.chauvet@bootlin.com \
--cc=20241007-yuv-v12-0-01c1ada6fec8@bootlin.com \
--cc=airlied@gmail.com \
--cc=arthurgrillo@riseup.net \
--cc=dri-devel@lists.freedesktop.org \
--cc=hamohammed.sa@gmail.com \
--cc=jeremie.dautheribes@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mairacanal@riseup.net \
--cc=marcheu@google.com \
--cc=melissa.srw@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=mripard@kernel.org \
--cc=nicolejadeyee@google.com \
--cc=rodrigosiqueiramelo@gmail.com \
--cc=seanpaul@google.com \
--cc=simona.vetter@ffwll.ch \
--cc=simona@ffwll.ch \
--cc=thomas.petazzoni@bootlin.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox