From: Fan Ni <nifan.cxl@gmail.com>
To: Terry Bowman <terry.bowman@amd.com>
Cc: ming4.li@intel.com, linux-cxl@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
dave@stgolabs.net, jonathan.cameron@huawei.com,
dave.jiang@intel.com, alison.schofield@intel.com,
vishal.l.verma@intel.com, dan.j.williams@intel.com,
bhelgaas@google.com, mahesh@linux.ibm.com, ira.weiny@intel.com,
oohall@gmail.com, Benjamin.Cheatham@amd.com, rrichter@amd.com,
nathan.fontenot@amd.com, Smita.KoralahalliChannabasappa@amd.com
Subject: Re: [PATCH v2 01/14] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver'
Date: Thu, 31 Oct 2024 13:24:18 -0700 [thread overview]
Message-ID: <ZyPncuiISDL7ubqN@fan> (raw)
In-Reply-To: <20241025210305.27499-2-terry.bowman@amd.com>
On Fri, Oct 25, 2024 at 04:02:52PM -0500, Terry Bowman wrote:
> CXL.io provides PCIe like protocol error implementation, but CXL.io and
> PCIe have different handling requirements.
>
> The PCIe AER service driver may attempt recovering PCIe devices with
> uncorrectable errors while recovery is not used for CXL.io. Recovery is not
> used in the CXL.io recovery because of the potential for corruption on
> what can be system memory.
>
> Create pci_driver::cxl_err_handlers similar to pci_driver::error_handler.
> Create handlers for correctable and uncorrectable CXL.io error
> handling.
>
> The CXL error handlers will be used in future patches adding CXL PCIe
> port protocol error handling.
>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> ---
Reviewed-by: Fan Ni <fan.ni@samsung.com>
> include/linux/pci.h | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 573b4c4c2be6..106ac83e3a7b 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -886,6 +886,14 @@ struct pci_error_handlers {
> void (*cor_error_detected)(struct pci_dev *dev);
> };
>
> +/* CXL bus error event callbacks */
> +struct cxl_error_handlers {
> + /* CXL bus error detected on this device */
> + bool (*error_detected)(struct pci_dev *dev);
> +
> + /* Allow device driver to record more details of a correctable error */
> + void (*cor_error_detected)(struct pci_dev *dev);
> +};
>
> struct module;
>
> @@ -956,6 +964,7 @@ struct pci_driver {
> int (*sriov_set_msix_vec_count)(struct pci_dev *vf, int msix_vec_count); /* On PF */
> u32 (*sriov_get_vf_total_msix)(struct pci_dev *pf);
> const struct pci_error_handlers *err_handler;
> + const struct cxl_error_handlers *cxl_err_handler;
> const struct attribute_group **groups;
> const struct attribute_group **dev_groups;
> struct device_driver driver;
> --
> 2.34.1
>
--
Fan Ni
next prev parent reply other threads:[~2024-10-31 20:24 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-25 21:02 [PATCH v2 0/14] Enable CXL PCIe port protocol error handling and logging Terry Bowman
2024-10-25 21:02 ` [PATCH v2 01/14] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver' Terry Bowman
2024-10-30 15:14 ` Jonathan Cameron
2024-10-30 15:15 ` Bowman, Terry
2024-10-31 16:20 ` Dave Jiang
2024-10-31 20:24 ` Fan Ni [this message]
2024-10-25 21:02 ` [PATCH v2 02/14] PCI/AER: Rename AER driver's interfaces to also indicate CXL PCIe port support Terry Bowman
2024-10-30 15:13 ` Jonathan Cameron
2024-10-31 16:21 ` Dave Jiang
2024-10-31 20:25 ` Fan Ni
2024-10-25 21:02 ` [PATCH v2 03/14] cxl/pci: Introduce helper functions pcie_is_cxl() and pcie_is_cxl_port() Terry Bowman
2024-10-30 14:57 ` Jonathan Cameron
2024-10-31 16:25 ` Dave Jiang
2024-10-31 21:22 ` Fan Ni
2024-10-25 21:02 ` [PATCH v2 04/14] PCI/AER: Modify AER driver logging to report CXL or PCIe bus error type Terry Bowman
2024-10-30 14:56 ` Jonathan Cameron
2024-10-31 16:27 ` Dave Jiang
2024-10-31 21:27 ` Fan Ni
2024-10-25 21:02 ` [PATCH v2 05/14] PCI/AER: Add CXL PCIe port correctable error support in AER service driver Terry Bowman
2024-10-30 15:13 ` Jonathan Cameron
2024-10-30 15:51 ` Bowman, Terry
2024-11-04 21:50 ` Dan Williams
2024-11-04 22:05 ` Bowman, Terry
2024-10-31 16:37 ` Dave Jiang
2024-10-25 21:02 ` [PATCH v2 06/14] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices Terry Bowman
2024-10-30 15:37 ` Jonathan Cameron
2024-10-31 16:58 ` Dave Jiang
2024-11-01 13:30 ` Bowman, Terry
2024-10-25 21:02 ` [PATCH v2 07/14] PCI/AER: Add CXL PCIe port uncorrectable error recovery in AER service driver Terry Bowman
2024-10-30 15:42 ` Jonathan Cameron
2024-10-25 21:02 ` [PATCH v2 08/14] cxl/pci: Change find_cxl_ports() to non-static Terry Bowman
2024-10-30 15:45 ` Jonathan Cameron
2024-10-30 15:54 ` Bowman, Terry
2024-10-25 21:03 ` [PATCH v2 09/14] cxl/pci: Map CXL PCIe root port and downstream switch port RAS registers Terry Bowman
2024-10-30 15:55 ` Jonathan Cameron
2024-10-25 21:03 ` [PATCH v2 10/14] cxl/pci: Map CXL PCIe upstream " Terry Bowman
2024-10-30 15:56 ` Jonathan Cameron
2024-10-25 21:03 ` [PATCH v2 11/14] cxl/pci: Rename RAS handler interfaces to also indicate CXL PCIe port support Terry Bowman
2024-10-30 15:59 ` Jonathan Cameron
2024-10-25 21:03 ` [PATCH v2 12/14] cxl/pci: Add error handler for CXL PCIe port RAS errors Terry Bowman
2024-10-30 16:03 ` Jonathan Cameron
2024-10-25 21:03 ` [PATCH v2 13/14] cxl/pci: Add trace logging " Terry Bowman
2024-10-30 16:07 ` Jonathan Cameron
2024-10-30 21:30 ` Bowman, Terry
2024-10-25 21:03 ` [PATCH v2 14/14] cxl/pci: Add support to assign and clear pci_driver::cxl_err_handlers Terry Bowman
2024-10-30 16:11 ` Jonathan Cameron
2024-10-30 21:34 ` Bowman, Terry
2024-10-27 16:59 ` [PATCH v2 0/14] Applies to Base commit: 8cf0b93919e1 (tag: v6.12-rc2) Linux 6.12-rc2 Bowman, Terry
2024-10-28 1:05 ` [PATCH v2 0/14] Enable CXL PCIe port protocol error handling and logging Bowman, Terry
2024-11-01 18:00 ` Fan Ni
2024-11-01 18:28 ` Bowman, Terry
2024-11-01 19:11 ` Fan Ni
2024-11-01 22:11 ` Fan Ni
2024-11-04 21:25 ` Bowman, Terry
2024-11-04 21:48 ` Fan Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZyPncuiISDL7ubqN@fan \
--to=nifan.cxl@gmail.com \
--cc=Benjamin.Cheatham@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mahesh@linux.ibm.com \
--cc=ming4.li@intel.com \
--cc=nathan.fontenot@amd.com \
--cc=oohall@gmail.com \
--cc=rrichter@amd.com \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox