From: "zhudi (E)" <zhudi2@huawei.com>
To: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Daniel Borkmann <daniel@iogearbox.net>,
"Andrii Nakryiko" <andrii@kernel.org>, Martin Lau <kafai@fb.com>,
Song Liu <songliubraving@fb.com>, Yonghong Song <yhs@fb.com>,
john fastabend <john.fastabend@gmail.com>,
KP Singh <kpsingh@kernel.org>,
Jakub Sitnicki <jakub@cloudflare.com>, bpf <bpf@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
"Luzhihao (luzhihao, Euler)" <luzhihao@huawei.com>,
"Chenxiang (EulerOS)" <rose.chen@huawei.com>
Subject: Re: [PATCH bpf-next v5 2/2] selftests: bpf: test BPF_PROG_QUERY for progs attached to sockmap
Date: Sat, 15 Jan 2022 02:34:00 +0000 [thread overview]
Message-ID: <a05a0e4fdd3c49deaa6671c14bb20a6c@huawei.com> (raw)
> On Thu, Jan 13, 2022 at 1:01 AM Di Zhu <zhudi2@huawei.com> wrote:
> >
> > Add test for querying progs attached to sockmap. we use an existing
> > libbpf query interface to query prog cnt before and after progs
> > attaching to sockmap and check whether the queried prog id is right.
> >
> > Signed-off-by: Di Zhu <zhudi2@huawei.com>
> > Acked-by: Yonghong Song <yhs@fb.com>
> > ---
> > .../selftests/bpf/prog_tests/sockmap_basic.c | 70 +++++++++++++++++++
> > .../bpf/progs/test_sockmap_progs_query.c | 24 +++++++
> > 2 files changed, 94 insertions(+)
> > create mode 100644
> tools/testing/selftests/bpf/progs/test_sockmap_progs_query.c
> >
> > diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
> b/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
> > index 85db0f4cdd95..06923ea44bad 100644
> > --- a/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
> > +++ b/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
> > @@ -8,6 +8,7 @@
> > #include "test_sockmap_update.skel.h"
> > #include "test_sockmap_invalid_update.skel.h"
> > #include "test_sockmap_skb_verdict_attach.skel.h"
> > +#include "test_sockmap_progs_query.skel.h"
> > #include "bpf_iter_sockmap.skel.h"
> >
> > #define TCP_REPAIR 19 /* TCP sock is under repair
> right now */
> > @@ -315,6 +316,69 @@ static void test_sockmap_skb_verdict_attach(enum
> bpf_attach_type first,
> > test_sockmap_skb_verdict_attach__destroy(skel);
> > }
> >
> > +static __u32 query_prog_id(int prog_fd)
> > +{
> > + struct bpf_prog_info info = {};
> > + __u32 info_len = sizeof(info);
> > + int err;
> > +
> > + err = bpf_obj_get_info_by_fd(prog_fd, &info, &info_len);
> > + if (!ASSERT_OK(err, "bpf_obj_get_info_by_fd") ||
> > + !ASSERT_EQ(info_len, sizeof(info), "bpf_obj_get_info_by_fd"))
> > + return 0;
> > +
> > + return info.id;
> > +}
> > +
> > +static void test_sockmap_progs_query(enum bpf_attach_type attach_type)
> > +{
> > + struct test_sockmap_progs_query *skel;
> > + int err, map_fd, verdict_fd, duration = 0;
> > + __u32 attach_flags = 0;
> > + __u32 prog_ids[3] = {};
> > + __u32 prog_cnt = 3;
> > +
> > + skel = test_sockmap_progs_query__open_and_load();
> > + if (!ASSERT_OK_PTR(skel,
> "test_sockmap_progs_query__open_and_load"))
> > + return;
> > +
> > + map_fd = bpf_map__fd(skel->maps.sock_map);
> > +
> > + if (attach_type == BPF_SK_MSG_VERDICT)
> > + verdict_fd =
> bpf_program__fd(skel->progs.prog_skmsg_verdict);
> > + else
> > + verdict_fd =
> bpf_program__fd(skel->progs.prog_skb_verdict);
> > +
> > + err = bpf_prog_query(map_fd, attach_type, 0 /* query flags */,
> > + &attach_flags, prog_ids, &prog_cnt);
> > + if (!ASSERT_OK(err, "bpf_prog_query failed"))
> > + goto out;
> > +
> > + if (!ASSERT_EQ(attach_flags, 0, "wrong attach_flags on query"))
> > + goto out;
> > +
> > + if (!ASSERT_EQ(prog_cnt, 0, "wrong program count on query"))
> > + goto out;
> > +
> > + err = bpf_prog_attach(verdict_fd, map_fd, attach_type, 0);
> > + if (!ASSERT_OK(err, "bpf_prog_attach failed"))
> > + goto out;
> > +
> > + prog_cnt = 1;
> > + err = bpf_prog_query(map_fd, attach_type, 0 /* query flags */,
> > + &attach_flags, prog_ids, &prog_cnt);
> > +
> > + ASSERT_OK(err, "bpf_prog_query failed");
> > + ASSERT_EQ(attach_flags, 0, "wrong attach_flags on query");
> > + ASSERT_EQ(prog_cnt, 1, "wrong program count on query");
> > + ASSERT_EQ(prog_ids[0], query_prog_id(verdict_fd),
> > + "wrong prog_ids on query");
>
> See how much easier it is to follow these tests, why didn't you do the
> same with err, attach_flags and prog above?
It is recommended by Yonghong Song to increase the test coverage.
>
>
> > +
> > + bpf_prog_detach2(verdict_fd, map_fd, attach_type);
> > +out:
> > + test_sockmap_progs_query__destroy(skel);
> > +}
> > +
> > void test_sockmap_basic(void)
> > {
> > if (test__start_subtest("sockmap create_update_free"))
> > @@ -341,4 +405,10 @@ void test_sockmap_basic(void)
> >
> test_sockmap_skb_verdict_attach(BPF_SK_SKB_STREAM_VERDICT,
> >
> BPF_SK_SKB_VERDICT);
> > }
> > + if (test__start_subtest("sockmap progs query")) {
> > + test_sockmap_progs_query(BPF_SK_MSG_VERDICT);
> > +
> test_sockmap_progs_query(BPF_SK_SKB_STREAM_PARSER);
> > +
> test_sockmap_progs_query(BPF_SK_SKB_STREAM_VERDICT);
> > + test_sockmap_progs_query(BPF_SK_SKB_VERDICT);
>
> Why are these not separate subtests? What's the benefit of bundling
> them into one subtest?
>
These are essentially doing the same thing, just for different program attach types.
> > + }
> > }
> > diff --git a/tools/testing/selftests/bpf/progs/test_sockmap_progs_query.c
> b/tools/testing/selftests/bpf/progs/test_sockmap_progs_query.c
> > new file mode 100644
> > index 000000000000..9d58d61c0dee
> > --- /dev/null
> > +++ b/tools/testing/selftests/bpf/progs/test_sockmap_progs_query.c
> > @@ -0,0 +1,24 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +#include "vmlinux.h"
> > +#include <bpf/bpf_helpers.h>
> > +
> > +struct {
> > + __uint(type, BPF_MAP_TYPE_SOCKMAP);
> > + __uint(max_entries, 1);
> > + __type(key, __u32);
> > + __type(value, __u64);
> > +} sock_map SEC(".maps");
> > +
> > +SEC("sk_skb")
> > +int prog_skb_verdict(struct __sk_buff *skb)
> > +{
> > + return SK_PASS;
> > +}
> > +
> > +SEC("sk_msg")
> > +int prog_skmsg_verdict(struct sk_msg_md *msg)
> > +{
> > + return SK_PASS;
> > +}
> > +
> > +char _license[] SEC("license") = "GPL";
> > --
> > 2.27.0
> >
next reply other threads:[~2022-01-15 2:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-15 2:34 zhudi (E) [this message]
2022-01-15 2:48 ` [PATCH bpf-next v5 2/2] selftests: bpf: test BPF_PROG_QUERY for progs attached to sockmap Andrii Nakryiko
-- strict thread matches above, loose matches on Subject: below --
2022-01-17 2:59 zhudi (E)
2022-01-13 9:00 [PATCH bpf-next v5 1/2] bpf: support " Di Zhu
2022-01-13 9:00 ` [PATCH bpf-next v5 2/2] selftests: bpf: test " Di Zhu
2022-01-15 1:18 ` Andrii Nakryiko
2021-11-05 1:57 [PATCH bpf-next v5 1/2] bpf: support " Di Zhu
2021-11-05 1:57 ` [PATCH bpf-next v5 2/2] selftests: bpf: test " Di Zhu
2021-11-05 4:24 ` Yonghong Song
2021-11-04 6:09 zhudi (E)
2021-11-04 1:07 [PATCH bpf-next v5 1/2] bpf: support " Di Zhu
2021-11-04 1:07 ` [PATCH bpf-next v5 2/2] selftests: bpf: test " Di Zhu
2021-11-04 5:51 ` Yonghong Song
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a05a0e4fdd3c49deaa6671c14bb20a6c@huawei.com \
--to=zhudi2@huawei.com \
--cc=andrii.nakryiko@gmail.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=jakub@cloudflare.com \
--cc=john.fastabend@gmail.com \
--cc=kafai@fb.com \
--cc=kpsingh@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luzhihao@huawei.com \
--cc=rose.chen@huawei.com \
--cc=songliubraving@fb.com \
--cc=yhs@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox