[PATCH] mmc: core: Align to common busy polling behaviour for mmc ioctls

[PATCH] mmc: core: Align to common busy polling behaviour for mmc ioctls

[Ulf Hansson]

Let's align to the common busy polling behaviour for mmc ioctls, by
updating the below two corresponding parts, that comes into play when using
an R1B response for a command.

*) A command with an R1B response should be prepared by calling
mmc_prepare_busy_cmd(), which make us respects the host's busy timeout
constraints.
**) When an R1B response is being used and the host also supports HW busy
detection, we should skip to poll for busy completion.

Suggested-by: Christian Loehle <cloehle@hyperstone.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/core/block.c   | 25 +++++++++++++++++--------
 drivers/mmc/core/mmc_ops.c |  1 +
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 20da7ed43e6d..672ab90c4b2d 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -470,6 +470,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	struct mmc_data data = {};
 	struct mmc_request mrq = {};
 	struct scatterlist sg;
+	bool r1b_resp, use_r1b_resp = false;
+	unsigned int busy_timeout_ms;
 	int err;
 	unsigned int target_part;
 
@@ -545,6 +547,13 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	    (cmd.opcode == MMC_SWITCH))
 		return mmc_sanitize(card, idata->ic.cmd_timeout_ms);
 
+	/* If it's an R1B response we need some more preparations. */
+	busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS;
+	r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B;
+	if (r1b_resp)
+		use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd,
+						    busy_timeout_ms);
+
 	mmc_wait_for_req(card->host, &mrq);
 	memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp));
 
@@ -596,14 +605,14 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	if (idata->ic.postsleep_min_us)
 		usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
 
-	if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
-		/*
-		 * Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we
-		 * allow to override the default timeout value if a custom timeout is specified.
-		 */
-		err = mmc_poll_for_busy(card, idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS,
-					false, MMC_BUSY_IO);
-	}
+	/* No need to poll when using HW busy detection. */
+	if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
+		return 0;
+
+	/* Ensure RPMB/R1B command has completed by polling with CMD13. */
+	if (idata->rpmb || r1b_resp)
+		err = mmc_poll_for_busy(card, busy_timeout_ms, false,
+					MMC_BUSY_IO);
 
 	return err;
 }
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 81c55bfd6e0c..3b3adbddf664 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -575,6 +575,7 @@ bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
 	cmd->busy_timeout = timeout_ms;
 	return true;
 }
+EXPORT_SYMBOL_GPL(mmc_prepare_busy_cmd);
 
 /**
  *	__mmc_switch - modify EXT_CSD register
-- 
2.34.1

RE: [PATCH] mmc: core: Align to common busy polling behaviour for mmc ioctls

[Christian Löhle]

FWIW you can add a
Reviewed-by: Christian Loehle <cloehle@hyperstone.com>
Thanks!


-----Original Message-----
From: Ulf Hansson <ulf.hansson@linaro.org> 
Sent: Montag, 13. Februar 2023 14:37
To: linux-mmc@vger.kernel.org; Ulf Hansson <ulf.hansson@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>; Avri Altman <avri.altman@wdc.com>; Christian Löhle <CLoehle@hyperstone.com>; linux-kernel@vger.kernel.org
Subject: [PATCH] mmc: core: Align to common busy polling behaviour for mmc ioctls

Let's align to the common busy polling behaviour for mmc ioctls, by updating the below two corresponding parts, that comes into play when using an R1B response for a command.

*) A command with an R1B response should be prepared by calling mmc_prepare_busy_cmd(), which make us respects the host's busy timeout constraints.
**) When an R1B response is being used and the host also supports HW busy detection, we should skip to poll for busy completion.

Suggested-by: Christian Loehle <cloehle@hyperstone.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/core/block.c   | 25 +++++++++++++++++--------
 drivers/mmc/core/mmc_ops.c |  1 +
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 20da7ed43e6d..672ab90c4b2d 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -470,6 +470,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	struct mmc_data data = {};
 	struct mmc_request mrq = {};
 	struct scatterlist sg;
+	bool r1b_resp, use_r1b_resp = false;
+	unsigned int busy_timeout_ms;
 	int err;
 	unsigned int target_part;
 
@@ -545,6 +547,13 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	    (cmd.opcode == MMC_SWITCH))
 		return mmc_sanitize(card, idata->ic.cmd_timeout_ms);
 
+	/* If it's an R1B response we need some more preparations. */
+	busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS;
+	r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B;
+	if (r1b_resp)
+		use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd,
+						    busy_timeout_ms);
+
 	mmc_wait_for_req(card->host, &mrq);
 	memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp));
 
@@ -596,14 +605,14 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	if (idata->ic.postsleep_min_us)
 		usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
 
-	if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
-		/*
-		 * Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we
-		 * allow to override the default timeout value if a custom timeout is specified.
-		 */
-		err = mmc_poll_for_busy(card, idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS,
-					false, MMC_BUSY_IO);
-	}
+	/* No need to poll when using HW busy detection. */
+	if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
+		return 0;
+
+	/* Ensure RPMB/R1B command has completed by polling with CMD13. */
+	if (idata->rpmb || r1b_resp)
+		err = mmc_poll_for_busy(card, busy_timeout_ms, false,
+					MMC_BUSY_IO);
 
 	return err;
 }
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 81c55bfd6e0c..3b3adbddf664 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -575,6 +575,7 @@ bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
 	cmd->busy_timeout = timeout_ms;
 	return true;
 }
+EXPORT_SYMBOL_GPL(mmc_prepare_busy_cmd);
 
 /**
  *	__mmc_switch - modify EXT_CSD register
--
2.34.1

Hyperstone GmbH | Reichenaustr. 39a  | 78467 Konstanz
Managing Director: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782

Re: [PATCH] mmc: core: Align to common busy polling behaviour for mmc ioctls

[Ulf Hansson]

On Mon, 13 Feb 2023 at 14:37, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> Let's align to the common busy polling behaviour for mmc ioctls, by
> updating the below two corresponding parts, that comes into play when using
> an R1B response for a command.
>
> *) A command with an R1B response should be prepared by calling
> mmc_prepare_busy_cmd(), which make us respects the host's busy timeout
> constraints.
> **) When an R1B response is being used and the host also supports HW busy
> detection, we should skip to poll for busy completion.
>
> Suggested-by: Christian Loehle <cloehle@hyperstone.com>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

I have now applied this for next and by adding your reviewed-by tag, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/core/block.c   | 25 +++++++++++++++++--------
>  drivers/mmc/core/mmc_ops.c |  1 +
>  2 files changed, 18 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 20da7ed43e6d..672ab90c4b2d 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -470,6 +470,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
>         struct mmc_data data = {};
>         struct mmc_request mrq = {};
>         struct scatterlist sg;
> +       bool r1b_resp, use_r1b_resp = false;
> +       unsigned int busy_timeout_ms;
>         int err;
>         unsigned int target_part;
>
> @@ -545,6 +547,13 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
>             (cmd.opcode == MMC_SWITCH))
>                 return mmc_sanitize(card, idata->ic.cmd_timeout_ms);
>
> +       /* If it's an R1B response we need some more preparations. */
> +       busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS;
> +       r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B;
> +       if (r1b_resp)
> +               use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd,
> +                                                   busy_timeout_ms);
> +
>         mmc_wait_for_req(card->host, &mrq);
>         memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp));
>
> @@ -596,14 +605,14 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
>         if (idata->ic.postsleep_min_us)
>                 usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
>
> -       if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
> -               /*
> -                * Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we
> -                * allow to override the default timeout value if a custom timeout is specified.
> -                */
> -               err = mmc_poll_for_busy(card, idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS,
> -                                       false, MMC_BUSY_IO);
> -       }
> +       /* No need to poll when using HW busy detection. */
> +       if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
> +               return 0;
> +
> +       /* Ensure RPMB/R1B command has completed by polling with CMD13. */
> +       if (idata->rpmb || r1b_resp)
> +               err = mmc_poll_for_busy(card, busy_timeout_ms, false,
> +                                       MMC_BUSY_IO);
>
>         return err;
>  }
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index 81c55bfd6e0c..3b3adbddf664 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -575,6 +575,7 @@ bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
>         cmd->busy_timeout = timeout_ms;
>         return true;
>  }
> +EXPORT_SYMBOL_GPL(mmc_prepare_busy_cmd);
>
>  /**
>   *     __mmc_switch - modify EXT_CSD register
> --
> 2.34.1
>