public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Paolo Abeni <pabeni@redhat.com>
To: Peter Delevoryas <peter@pjd.dev>
Cc: sam@mendozajonas.com, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, joel@jms.id.au, gwshan@linux.vnet.ibm.com,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] net/ncsi: Add NC-SI 1.2 Get MC MAC Address command
Date: Thu, 22 Dec 2022 11:53:13 +0100	[thread overview]
Message-ID: <a198f9fa6737b22ed2839a5dbfbcfdf6c6d7508d.camel@redhat.com> (raw)
In-Reply-To: <20221221052246.519674-4-peter@pjd.dev>

On Tue, 2022-12-20 at 21:22 -0800, Peter Delevoryas wrote:
> This change adds support for the NC-SI 1.2 Get MC MAC Address command,
> specified here:
> 
> https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.2WIP90_0.pdf
> 
> It serves the exact same function as the existing OEM Get MAC Address
> commands, so if a channel reports that it supports NC-SI 1.2, we prefer
> to use the standard command rather than the OEM command.
> 
> Verified with an invalid MAC address and 2 valid ones:
> 
> [   55.137072] ftgmac100 1e690000.ftgmac eth0: NCSI: Received 3 provisioned MAC addresses
> [   55.137614] ftgmac100 1e690000.ftgmac eth0: NCSI: MAC address 0: 00:00:00:00:00:00
> [   55.138026] ftgmac100 1e690000.ftgmac eth0: NCSI: MAC address 1: fa:ce:b0:0c:20:22
> [   55.138528] ftgmac100 1e690000.ftgmac eth0: NCSI: MAC address 2: fa:ce:b0:0c:20:23
> [   55.139241] ftgmac100 1e690000.ftgmac eth0: NCSI: Unable to assign 00:00:00:00:00:00 to device
> [   55.140098] ftgmac100 1e690000.ftgmac eth0: NCSI: Set MAC address to fa:ce:b0:0c:20:22
> 
> IMPORTANT NOTE:
> 
> The code I'm submitting here is parsing the MAC addresses as if they are
> transmitted in *reverse* order.
> 
> This is different from how every other NC-SI command is parsed in the
> Linux kernel, even though the spec describes the format in the same way
> for every command.
> 
> The *reason* for this is that I was able to test this code against the
> new 200G Broadcom NIC, which reports that it supports NC-SI 1.2 in Get
> Version ID and successfully responds to this command. It transmits the
> MAC addresses in reverse byte order.
> 
> Nvidia's new 200G NIC doesn't support NC-SI 1.2 yet. I don't know how
> they're planning to implement it.

All the above looks like a good reason to wait for at least a
stable/documented H/W implementation, before pushing code to the
networking core.

>  net/ncsi/ncsi-cmd.c    |  3 ++-
>  net/ncsi/ncsi-manage.c |  9 +++++++--
>  net/ncsi/ncsi-pkt.h    | 10 ++++++++++
>  net/ncsi/ncsi-rsp.c    | 45 +++++++++++++++++++++++++++++++++++++++++-
>  4 files changed, 63 insertions(+), 4 deletions(-)
> 
> diff --git a/net/ncsi/ncsi-cmd.c b/net/ncsi/ncsi-cmd.c
> index dda8b76b7798..7be177f55173 100644
> --- a/net/ncsi/ncsi-cmd.c
> +++ b/net/ncsi/ncsi-cmd.c
> @@ -269,7 +269,8 @@ static struct ncsi_cmd_handler {
>  	{ NCSI_PKT_CMD_GPS,    0, ncsi_cmd_handler_default },
>  	{ NCSI_PKT_CMD_OEM,   -1, ncsi_cmd_handler_oem     },
>  	{ NCSI_PKT_CMD_PLDM,   0, NULL                     },
> -	{ NCSI_PKT_CMD_GPUUID, 0, ncsi_cmd_handler_default }
> +	{ NCSI_PKT_CMD_GPUUID, 0, ncsi_cmd_handler_default },
> +	{ NCSI_PKT_CMD_GMCMA,  0, ncsi_cmd_handler_default }
>  };
>  
>  static struct ncsi_request *ncsi_alloc_command(struct ncsi_cmd_arg *nca)
> diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
> index f56795769893..bc1887a2543d 100644
> --- a/net/ncsi/ncsi-manage.c
> +++ b/net/ncsi/ncsi-manage.c
> @@ -1038,11 +1038,16 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
>  	case ncsi_dev_state_config_oem_gma:
>  		nd->state = ncsi_dev_state_config_clear_vids;
>  
> -		nca.type = NCSI_PKT_CMD_OEM;
>  		nca.package = np->id;
>  		nca.channel = nc->id;
>  		ndp->pending_req_num = 1;
> -		ret = ncsi_gma_handler(&nca, nc->version.mf_id);
> +		if (nc->version.major >= 1 && nc->version.minor >= 2) {
> +			nca.type = NCSI_PKT_CMD_GMCMA;
> +			ret = ncsi_xmit_cmd(&nca);
> +		} else {
> +			nca.type = NCSI_PKT_CMD_OEM;
> +			ret = ncsi_gma_handler(&nca, nc->version.mf_id);
> +		}
>  		if (ret < 0)
>  			schedule_work(&ndp->work);
>  
> diff --git a/net/ncsi/ncsi-pkt.h b/net/ncsi/ncsi-pkt.h
> index c9d1da34dc4d..f2f3b5c1b941 100644
> --- a/net/ncsi/ncsi-pkt.h
> +++ b/net/ncsi/ncsi-pkt.h
> @@ -338,6 +338,14 @@ struct ncsi_rsp_gpuuid_pkt {
>  	__be32                  checksum;
>  };
>  
> +/* Get MC MAC Address */
> +struct ncsi_rsp_gmcma_pkt {
> +	struct ncsi_rsp_pkt_hdr rsp;
> +	unsigned char           address_count;
> +	unsigned char           reserved[3];
> +	unsigned char           addresses[][ETH_ALEN];
> +};
> +
>  /* AEN: Link State Change */
>  struct ncsi_aen_lsc_pkt {
>  	struct ncsi_aen_pkt_hdr aen;        /* AEN header      */
> @@ -398,6 +406,7 @@ struct ncsi_aen_hncdsc_pkt {
>  #define NCSI_PKT_CMD_GPUUID	0x52 /* Get package UUID                 */
>  #define NCSI_PKT_CMD_QPNPR	0x56 /* Query Pending NC PLDM request */
>  #define NCSI_PKT_CMD_SNPR	0x57 /* Send NC PLDM Reply  */
> +#define NCSI_PKT_CMD_GMCMA	0x58 /* Get MC MAC Address */
>  
>  
>  /* NCSI packet responses */
> @@ -433,6 +442,7 @@ struct ncsi_aen_hncdsc_pkt {
>  #define NCSI_PKT_RSP_GPUUID	(NCSI_PKT_CMD_GPUUID + 0x80)
>  #define NCSI_PKT_RSP_QPNPR	(NCSI_PKT_CMD_QPNPR   + 0x80)
>  #define NCSI_PKT_RSP_SNPR	(NCSI_PKT_CMD_SNPR   + 0x80)
> +#define NCSI_PKT_RSP_GMCMA	(NCSI_PKT_CMD_GMCMA  + 0x80)
>  
>  /* NCSI response code/reason */
>  #define NCSI_PKT_RSP_C_COMPLETED	0x0000 /* Command Completed        */
> diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
> index 7a805b86a12d..28a042688d0b 100644
> --- a/net/ncsi/ncsi-rsp.c
> +++ b/net/ncsi/ncsi-rsp.c
> @@ -1140,6 +1140,48 @@ static int ncsi_rsp_handler_netlink(struct ncsi_request *nr)
>  	return ret;
>  }
>  
> +static int ncsi_rsp_handler_gmcma(struct ncsi_request *nr)
> +{
> +	struct ncsi_dev_priv *ndp = nr->ndp;
> +	struct net_device *ndev = ndp->ndev.dev;
> +	struct ncsi_rsp_gmcma_pkt *rsp;
> +	struct sockaddr saddr;
> +	int ret = -1;
> +	int i;
> +	int j;
> +
> +	rsp = (struct ncsi_rsp_gmcma_pkt *)skb_network_header(nr->rsp);
> +	saddr.sa_family = ndev->type;
> +	ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
> +
> +	netdev_warn(ndev, "NCSI: Received %d provisioned MAC addresses\n",
> +		    rsp->address_count);
> +	for (i = 0; i < rsp->address_count; i++) {
> +		netdev_warn(ndev, "NCSI: MAC address %d: "
> +			    "%02x:%02x:%02x:%02x:%02x:%02x\n", i,
> +			    rsp->addresses[i][5], rsp->addresses[i][4],
> +			    rsp->addresses[i][3], rsp->addresses[i][2],
> +			    rsp->addresses[i][1], rsp->addresses[i][0]);
> +	}

You must avoid this kind of debug messages on 'warn' level (more
below). You could consider pr_debug() instead or completely drop the
message.

Cheers,

Paolo


  reply	other threads:[~2022-12-22 10:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-21  5:22 [PATCH 0/3] net/ncsi: Add NC-SI 1.2 Get MC MAC Address command Peter Delevoryas
2022-12-21  5:22 ` [PATCH 1/3] net/ncsi: Simplify Kconfig/dts control flow Peter Delevoryas
2022-12-21  5:22 ` [PATCH 2/3] net/ncsi: Fix netlink major/minor version numbers Peter Delevoryas
2022-12-21  5:22 ` [PATCH 3/3] net/ncsi: Add NC-SI 1.2 Get MC MAC Address command Peter Delevoryas
2022-12-22 10:53   ` Paolo Abeni [this message]
2022-12-22 17:18     ` Peter Delevoryas
2022-12-22 10:44 ` [PATCH 0/3] " Paolo Abeni
2022-12-22 17:13   ` Peter Delevoryas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a198f9fa6737b22ed2839a5dbfbcfdf6c6d7508d.camel@redhat.com \
    --to=pabeni@redhat.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=gwshan@linux.vnet.ibm.com \
    --cc=joel@jms.id.au \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peter@pjd.dev \
    --cc=sam@mendozajonas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox