From: Yeoreum Yun <yeoreum.yun@arm.com>
To: Ard Biesheuvel <ardb+git@google.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, will@kernel.org,
catalin.marinas@arm.com, mark.rutland@arm.com,
Ard Biesheuvel <ardb@kernel.org>
Subject: Re: [PATCH v2 3/3] arm64/boot: Disallow BSS exports to startup code
Date: Thu, 8 May 2025 14:41:55 +0100 [thread overview]
Message-ID: <aBy0o+AvFkMm+5ss@e129823.arm.com> (raw)
In-Reply-To: <aByy1CFUieJQeofl@e129823.arm.com>
On Thu, May 08, 2025 at 02:34:12PM +0100, Yeoreum Yun wrote:
> Hi Ard,
>
> > From: Ard Biesheuvel <ardb@kernel.org>
> >
> > BSS might be uninitialized when entering the startup code, so forbid the
> > use by the startup code of any variables that live after __bss_start in
> > the linker map.
> >
> > Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> > ---
> > arch/arm64/kernel/image-vars.h | 62 +++++++++++---------
> > arch/arm64/kernel/vmlinux.lds.S | 2 +
> > 2 files changed, 35 insertions(+), 29 deletions(-)
> >
> > diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
> > index c3b4c0479d5c..a928e0c0b45a 100644
> > --- a/arch/arm64/kernel/image-vars.h
> > +++ b/arch/arm64/kernel/image-vars.h
> > @@ -10,6 +10,12 @@
> > #error This file should only be included in vmlinux.lds.S
> > #endif
> >
> > +#define PI_EXPORT_SYM(sym) \
> > + __PI_EXPORT_SYM(sym, __pi_ ## sym, Cannot export BSS symbol sym to startup code)
> > +#define __PI_EXPORT_SYM(sym, pisym, msg)\
> > + PROVIDE(pisym = sym); \
> > + ASSERT((sym - KIMAGE_VADDR) < (__bss_start - KIMAGE_VADDR), #msg)
> > +
> > PROVIDE(__efistub_primary_entry = primary_entry);
> >
> > /*
> > @@ -36,37 +42,35 @@ PROVIDE(__pi___memcpy = __pi_memcpy);
> > PROVIDE(__pi___memmove = __pi_memmove);
> > PROVIDE(__pi___memset = __pi_memset);
> >
> > -PROVIDE(__pi_id_aa64isar1_override = id_aa64isar1_override);
> > -PROVIDE(__pi_id_aa64isar2_override = id_aa64isar2_override);
> > -PROVIDE(__pi_id_aa64mmfr0_override = id_aa64mmfr0_override);
> > -PROVIDE(__pi_id_aa64mmfr1_override = id_aa64mmfr1_override);
> > -PROVIDE(__pi_id_aa64mmfr2_override = id_aa64mmfr2_override);
> > -PROVIDE(__pi_id_aa64pfr0_override = id_aa64pfr0_override);
> > -PROVIDE(__pi_id_aa64pfr1_override = id_aa64pfr1_override);
> > -PROVIDE(__pi_id_aa64smfr0_override = id_aa64smfr0_override);
> > -PROVIDE(__pi_id_aa64zfr0_override = id_aa64zfr0_override);
> > -PROVIDE(__pi_arm64_sw_feature_override = arm64_sw_feature_override);
> > -PROVIDE(__pi_arm64_use_ng_mappings = arm64_use_ng_mappings);
> > +PI_EXPORT_SYM(id_aa64isar1_override);
> > +PI_EXPORT_SYM(id_aa64isar2_override);
> > +PI_EXPORT_SYM(id_aa64mmfr0_override);
> > +PI_EXPORT_SYM(id_aa64mmfr1_override);
> > +PI_EXPORT_SYM(id_aa64mmfr2_override);
> > +PI_EXPORT_SYM(id_aa64pfr0_override);
> > +PI_EXPORT_SYM(id_aa64pfr1_override);
> > +PI_EXPORT_SYM(id_aa64smfr0_override);
> > +PI_EXPORT_SYM(id_aa64zfr0_override);
> > +PI_EXPORT_SYM(arm64_sw_feature_override);
> > +PI_EXPORT_SYM(arm64_use_ng_mappings);
> > #ifdef CONFIG_CAVIUM_ERRATUM_27456
> > -PROVIDE(__pi_cavium_erratum_27456_cpus = cavium_erratum_27456_cpus);
> > -PROVIDE(__pi_is_midr_in_range_list = is_midr_in_range_list);
> > +PI_EXPORT_SYM(cavium_erratum_27456_cpus);
> > +PI_EXPORT_SYM(is_midr_in_range_list);
>
> small nit:
> Would you rebase this patchset after
> commit 117c3b21d3c7 ("arm64: Rework checks for broken Cavium HW in the PI code")?
> Otherwise, I experience boot failure because of SCS related code:
>
> ffff80008009fbc0 <is_midr_in_range_list>:
> ffff80008009fbc0: d503245f bti c
> ffff80008009fbc4: d503201f nop
> ffff80008009fbc8: d503201f nop
> ffff80008009fbcc: f800865e str x30, [x18], #0x8 ---- (1)
> ffff80008009fbd0: d503233f paciasp
> ...
>
> At pi phase, platform register initialized properly...
> So it makes panic on (1).
Doesn't initialize properly...
Sorry for typo.
>
> Thanks!
>
>
> > #endif
> > -PROVIDE(__pi__ctype = _ctype);
> > -PROVIDE(__pi_memstart_offset_seed = memstart_offset_seed);
> > -
> > -PROVIDE(__pi_swapper_pg_dir = swapper_pg_dir);
> > -
> > -PROVIDE(__pi__text = _text);
> > -PROVIDE(__pi__stext = _stext);
> > -PROVIDE(__pi__etext = _etext);
> > -PROVIDE(__pi___start_rodata = __start_rodata);
> > -PROVIDE(__pi___inittext_begin = __inittext_begin);
> > -PROVIDE(__pi___inittext_end = __inittext_end);
> > -PROVIDE(__pi___initdata_begin = __initdata_begin);
> > -PROVIDE(__pi___initdata_end = __initdata_end);
> > -PROVIDE(__pi__data = _data);
> > -PROVIDE(__pi___bss_start = __bss_start);
> > -PROVIDE(__pi__end = _end);
> > +PI_EXPORT_SYM(_ctype);
> > +PI_EXPORT_SYM(memstart_offset_seed);
> > +
> > +PI_EXPORT_SYM(swapper_pg_dir);
> > +
> > +PI_EXPORT_SYM(_text);
> > +PI_EXPORT_SYM(_stext);
> > +PI_EXPORT_SYM(_etext);
> > +PI_EXPORT_SYM(__start_rodata);
> > +PI_EXPORT_SYM(__inittext_begin);
> > +PI_EXPORT_SYM(__inittext_end);
> > +PI_EXPORT_SYM(__initdata_begin);
> > +PI_EXPORT_SYM(__initdata_end);
> > +PI_EXPORT_SYM(_data);
> >
> > #ifdef CONFIG_KVM
> >
> > diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
> > index 466544c47dca..e4a525a865c1 100644
> > --- a/arch/arm64/kernel/vmlinux.lds.S
> > +++ b/arch/arm64/kernel/vmlinux.lds.S
> > @@ -319,6 +319,7 @@ SECTIONS
> >
> > /* start of zero-init region */
> > BSS_SECTION(SBSS_ALIGN, 0, 0)
> > + __pi___bss_start = __bss_start;
> >
> > . = ALIGN(PAGE_SIZE);
> > __pi_init_pg_dir = .;
> > @@ -332,6 +333,7 @@ SECTIONS
> > . = ALIGN(SEGMENT_ALIGN);
> > __pecoff_data_size = ABSOLUTE(. - __initdata_begin);
> > _end = .;
> > + __pi__end = .;
> >
> > STABS_DEBUG
> > DWARF_DEBUG
> > --
> > 2.49.0.987.g0cc8ee98dc-goog
> >
>
> --
> Sincerely,
> Yeoreum Yun
>
--
Sincerely,
Yeoreum Yun
next prev parent reply other threads:[~2025-05-08 13:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-08 11:43 [PATCH v2 0/3] arm64/boot: Forbid the use of BSS symbols in startup code Ard Biesheuvel
2025-05-08 11:43 ` [PATCH v2 1/3] arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace Ard Biesheuvel
2025-05-08 11:43 ` [PATCH v2 2/3] arm64/boot: Move global CPU override variables out of BSS Ard Biesheuvel
2025-05-08 11:43 ` [PATCH v2 3/3] arm64/boot: Disallow BSS exports to startup code Ard Biesheuvel
2025-05-08 13:34 ` Yeoreum Yun
2025-05-08 13:41 ` Yeoreum Yun [this message]
2025-05-09 6:43 ` Ard Biesheuvel
2025-05-09 17:10 ` [PATCH v2 0/3] arm64/boot: Forbid the use of BSS symbols in " Yeoreum Yun
2025-05-16 15:37 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aBy0o+AvFkMm+5ss@e129823.arm.com \
--to=yeoreum.yun@arm.com \
--cc=ardb+git@google.com \
--cc=ardb@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox