From: "Dr. David Alan Gilbert" <linux@treblig.org>
To: Lee Jones <lee@kernel.org>
Cc: aaro.koskinen@iki.fi, andreas@kemnade.info, khilman@baylibre.com,
rogerq@kernel.org, tony@atomide.com, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mfd: twl6030-irq: Remove unused twl6030_mmc_card_detect*
Date: Fri, 13 Jun 2025 15:27:42 +0000 [thread overview]
Message-ID: <aExDbkQBhK3ZubVo@gallifrey> (raw)
In-Reply-To: <20250613143757.GL897353@google.com>
* Lee Jones (lee@kernel.org) wrote:
> On Sat, 07 Jun 2025, linux@treblig.org wrote:
>
> > From: "Dr. David Alan Gilbert" <linux@treblig.org>
> >
> > twl6030_mmc_card_detect() and twl6030_mmc_card_detect_config() have
> > been unused since 2013's
> > commit b2ff4790612b ("ARM: OMAP2+: Remove legacy
> > omap4_twl6030_hsmmc_init")
>
> This formatting is driving the little OCD being that lives on my
> shoulder crazy!
Thanks, which bit? I tend to put the commit .... on it's own
line, but then checkpatch really doesn't like long lines so I wrap
any word that starts after col 75.
> I'll fix-up and apply the patch. Bear with.
Thanks!
Dave
>
> > Remove them.
> >
> > Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
> > ---
> > drivers/mfd/twl6030-irq.c | 74 ---------------------------------------
> > include/linux/mfd/twl.h | 21 -----------
> > 2 files changed, 95 deletions(-)
> >
> > diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
> > index 00b14cef1dfb..ffb4b98639c7 100644
> > --- a/drivers/mfd/twl6030-irq.c
> > +++ b/drivers/mfd/twl6030-irq.c
> > @@ -256,80 +256,6 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
> > }
> > EXPORT_SYMBOL(twl6030_interrupt_mask);
> >
> > -int twl6030_mmc_card_detect_config(void)
> > -{
> > - int ret;
> > - u8 reg_val = 0;
> > -
> > - /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
> > - twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> > - REG_INT_MSK_LINE_B);
> > - twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> > - REG_INT_MSK_STS_B);
> > - /*
> > - * Initially Configuring MMC_CTRL for receiving interrupts &
> > - * Card status on TWL6030 for MMC1
> > - */
> > - ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
> > - if (ret < 0) {
> > - pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
> > - return ret;
> > - }
> > - reg_val &= ~VMMC_AUTO_OFF;
> > - reg_val |= SW_FC;
> > - ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
> > - if (ret < 0) {
> > - pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
> > - return ret;
> > - }
> > -
> > - /* Configuring PullUp-PullDown register */
> > - ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
> > - TWL6030_CFG_INPUT_PUPD3);
> > - if (ret < 0) {
> > - pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
> > - ret);
> > - return ret;
> > - }
> > - reg_val &= ~(MMC_PU | MMC_PD);
> > - ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
> > - TWL6030_CFG_INPUT_PUPD3);
> > - if (ret < 0) {
> > - pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
> > - ret);
> > - return ret;
> > - }
> > -
> > - return irq_find_mapping(twl6030_irq->irq_domain,
> > - MMCDETECT_INTR_OFFSET);
> > -}
> > -EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
> > -
> > -int twl6030_mmc_card_detect(struct device *dev, int slot)
> > -{
> > - int ret = -EIO;
> > - u8 read_reg = 0;
> > - struct platform_device *pdev = to_platform_device(dev);
> > -
> > - if (pdev->id) {
> > - /* TWL6030 provide's Card detect support for
> > - * only MMC1 controller.
> > - */
> > - pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
> > - return ret;
> > - }
> > - /*
> > - * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
> > - * 0 - Card not present ,1 - Card present
> > - */
> > - ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
> > - TWL6030_MMCCTRL);
> > - if (ret >= 0)
> > - ret = read_reg & STS_MMC;
> > - return ret;
> > -}
> > -EXPORT_SYMBOL(twl6030_mmc_card_detect);
> > -
> > static int twl6030_irq_map(struct irq_domain *d, unsigned int virq,
> > irq_hw_number_t hwirq)
> > {
> > diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
> > index 85dc406173db..b31e07fa4d51 100644
> > --- a/include/linux/mfd/twl.h
> > +++ b/include/linux/mfd/twl.h
> > @@ -205,27 +205,6 @@ int twl_get_hfclk_rate(void);
> > int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
> > int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
> >
> > -/* Card detect Configuration for MMC1 Controller on OMAP4 */
> > -#ifdef CONFIG_TWL4030_CORE
> > -int twl6030_mmc_card_detect_config(void);
> > -#else
> > -static inline int twl6030_mmc_card_detect_config(void)
> > -{
> > - pr_debug("twl6030_mmc_card_detect_config not supported\n");
> > - return 0;
> > -}
> > -#endif
> > -
> > -/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
> > -#ifdef CONFIG_TWL4030_CORE
> > -int twl6030_mmc_card_detect(struct device *dev, int slot);
> > -#else
> > -static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
> > -{
> > - pr_debug("Call back twl6030_mmc_card_detect not supported\n");
> > - return -EIO;
> > -}
> > -#endif
> > /*----------------------------------------------------------------------*/
> >
> > /*
> > --
> > 2.49.0
> >
>
> --
> Lee Jones [李琼斯]
--
-----Open up your eyes, open up your mind, open up your code -------
/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \
\ dave @ treblig.org | | In Hex /
\ _________________________|_____ http://www.treblig.org |_______/
next prev parent reply other threads:[~2025-06-13 15:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-07 20:22 [PATCH] mfd: twl6030-irq: Remove unused twl6030_mmc_card_detect* linux
2025-06-13 14:37 ` Lee Jones
2025-06-13 15:27 ` Dr. David Alan Gilbert [this message]
2025-06-19 11:51 ` Lee Jones
2025-06-13 14:39 ` (subset) " Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aExDbkQBhK3ZubVo@gallifrey \
--to=linux@treblig.org \
--cc=aaro.koskinen@iki.fi \
--cc=andreas@kemnade.info \
--cc=khilman@baylibre.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).