Re: [PATCH v4 0/3] LoongArch: Add Loongson-2K BMC support

[Corey Minyard <corey@minyard.net>]

On Fri, Jun 13, 2025 at 02:43:38PM +0800, Binbin Zhou wrote:
> Hi all:
> 
> This patch set introduces the Loongson-2K BMC.
> 
> It is a PCIe device present on servers similar to the Loongson-3 CPUs.
> And it is a multifunctional device (MFD), such as display as a sub-function
> of it.

I've asked this before, but I haven't gotten a answer, I don't think.

Is this really a multi-function device?  Is there (or will there be)
another driver that uses the MFD code?

If nothing else is going to use this, then it's really not a
multi-function device and all the code can go into the IPMI directory.
That simplifies maintenance.

If it is a multi-function device, then I want two separate Kconfig
items, one for the MFD and one for the IPMI portion.  That way it's
ready and you don't have to bother about the IPMI portion when
adding the other device.

All else looks good, I think.

-corey

> 
> For IPMI, according to the existing design, we use software simulation to
> implement the KCS interface registers: Stauts/Command/Data_Out/Data_In.
> 
> Also since both host side and BMC side read and write kcs status, we use
> fifo pointer to ensure data consistency.
> 
> For the display, based on simpledrm, the resolution is read from a fixed
> position in the BMC since the hardware does not support auto-detection
> of the resolution. Of course, we will try to support multiple
> resolutions later, through a vbios-like approach.
> 
> Especially, for the BMC reset function, since the display will be
> disconnected when BMC reset, we made a special treatment of re-push.
> 
> Based on this, I will present it in four patches:
> patch-1: BMC device PCI resource allocation.
> patch-2: BMC reset function support
> patch-3: IPMI implementation
> 
> Thanks.
> 
> -------
> V4:
> - Add Reviewed-by tag;
> - Change the order of the patches.
> Patch (1/3):
>   - Fix build warning by lkp: Kconfig tristate -> bool
>     - https://lore.kernel.org/all/202505312022.QmFmGE1F-lkp@intel.com/
>  - Update commit message;
>  - Move MFD_LS2K_BMC after MFD_INTEL_M10_BMC_PMCI in Kconfig and
>    Makefile.
> Patch (2/3):
>   - Remove unnecessary newlines;
>   - Rename ls2k_bmc_check_pcie_connected() to
>     ls2k_bmc_pcie_is_connected();
>   - Update comment message.
> Patch (3/3):
>   - Remove unnecessary newlines.
> 
> Link to V3:
> https://lore.kernel.org/all/cover.1748505446.git.zhoubinbin@loongson.cn/
> 
> V3:
> Patch (1/3):
>  - Drop "MFD" in title and comment;
>  - Fromatting code;
>  - Add clearer comments.
> Patch (2/3):
>  - Rebase linux-ipmi/next tree;
>  - Use readx()/writex() to read and write IPMI data instead of structure
>    pointer references;
>  - CONFIG_LOONGARCH -> MFD_LS2K_BMC;
>  - Drop unused output.
> Patch (3/3):
>  - Inline the ls2k_bmc_gpio_reset_handler() function to ls2k_bmc_pdata_initial();
>  - Add clearer comments.
>  - Use proper multi-line commentary as per the Coding Style documentation;
>  - Define all magic numbers.
> 
> Link to V2:
> https://lore.kernel.org/all/cover.1747276047.git.zhoubinbin@loongson.cn/
> 
> V2:
> - Drop ls2kdrm, use simpledrm instead.
> Patch (1/3):
>  - Use DEFINE_RES_MEM_NAMED/MFD_CELL_RES simplified code;
>  - Add resolution fetching due to replacing the original display
>    solution with simpledrm; 
>  - Add aperture_remove_conflicting_devices() to avoid efifb
>    conflict with simpledrm.
> Patch (3/3):
>  - This part of the function, moved from the original ls2kdrm to mfd;
>  - Use set_console to implement the Re-push display function.
> 
> Link to V1:
> https://lore.kernel.org/all/cover.1735550269.git.zhoubinbin@loongson.cn/
> 
> Binbin Zhou (3):
>   mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
>   mfd: ls2kbmc: Add Loongson-2K BMC reset function support
>   ipmi: Add Loongson-2K BMC support
> 
>  drivers/char/ipmi/Makefile       |   1 +
>  drivers/char/ipmi/ipmi_si.h      |   7 +
>  drivers/char/ipmi/ipmi_si_intf.c |   3 +
>  drivers/char/ipmi/ipmi_si_ls2k.c | 189 ++++++++++++
>  drivers/mfd/Kconfig              |  12 +
>  drivers/mfd/Makefile             |   2 +
>  drivers/mfd/ls2kbmc-mfd.c        | 485 +++++++++++++++++++++++++++++++
>  7 files changed, 699 insertions(+)
>  create mode 100644 drivers/char/ipmi/ipmi_si_ls2k.c
>  create mode 100644 drivers/mfd/ls2kbmc-mfd.c
> 
> 
> base-commit: cd2e103d57e5615f9bb027d772f93b9efd567224
> -- 
> 2.47.1
>