[PATCH v6 0/3] pci: qcom: Add QCS615 PCIe support

[PATCH v6 0/3] pci: qcom: Add QCS615 PCIe support

[Ziyue Zhang]

This series adds document, phy, configs support for PCIe in QCS615.

This series depend on the dt-bindings change
https://lore.kernel.org/all/20250521-topic-8150_pcie_drop_clocks-v1-0-3d42e84f6453@oss.qualcomm.com/

Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
Have following changes:
	- Add a new Document the QCS615 PCIe Controller
	- Add configurations in devicetree for PCIe, including registers, clocks, interrupts and phy setting sequence.
	- Add configurations in devicetree for PCIe, platform related gpios, PMIC regulators, etc.

Changes in v6:
- Change PCIe equalization setting to one lane
- Add reviewed by tags
- Link to v5: https://lore.kernel.org/all/t6bwkld55a2dcozxz7rxnvdgpjis6oveqzkh4s7nvxgikws4rl@fn2sd7zlabhe/

Changes in v5:
- Drop qcs615-pcie.yaml and use sm8150, as qcs615 is the downgraded
  version of sm8150, which can share the same yaml.
- Drop compatible enrty in driver and use sm8150's enrty (Krzysztof)
- Fix the DT format problem (Konrad)
- Link to v4: https://lore.kernel.org/all/20250507031559.4085159-1-quic_ziyuzhan@quicinc.com/

Changes in v4:
- Fixed compile error found by kernel test robot(Krzysztof)
- Update DT format (Konrad & Krzysztof)
- Remove QCS8550 compatible use QCS615 compatible only (Konrad)
- Update phy dt bindings to fix the dtb check errors.
- Link to v3: https://lore.kernel.org/all/20250310065613.151598-1-quic_ziyuzhan@quicinc.com/

Changes in v3:
- Update qcs615 dt-bindings to fit the qcom-soc.yaml (Krzysztof & Dmitry)
- Removed the driver patch and using fallback method (Mani)
- Update DT format, keep it same with the x1e801000.dtsi (Konrad)
- Update DT commit message (Bojor)
- Link to v2: https://lore.kernel.org/all/20241122023314.1616353-1-quic_ziyuzhan@quicinc.com/

Changes in v2:
- Update commit message for qcs615 phy
- Update qcs615 phy, using lowercase hex
- Removed redundant function
- split the soc dtsi and the platform dts into two changes
- Link to v1: https://lore.kernel.org/all/20241118082619.177201-1-quic_ziyuzhan@quicinc.com/

Krishna chaitanya chundru (2):
  arm64: dts: qcom: qcs615: enable pcie
  arm64: dts: qcom: qcs615-ride: Enable PCIe interface

Ziyue Zhang (1):
  dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings
    for QCS615

 .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml       |   2 +-
 arch/arm64/boot/dts/qcom/qcs615-ride.dts      |  42 +++++
 arch/arm64/boot/dts/qcom/qcs615.dtsi          | 145 ++++++++++++++++++
 3 files changed, 188 insertions(+), 1 deletion(-)


base-commit: 5d4809e25903ab8e74034c1f23c787fd26d52934
-- 
2.34.1

[PATCH v6 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615

[Ziyue Zhang]

QCS615 pcie phy only use 5 clocks, which are aux, cfg_ahb, ref,
ref_gen, pipe. So move "qcom,qcs615-qmp-gen3x1-pcie-phy" compatible
from 6 clocks' list to 5 clocks' list.

Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml     | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 2c6c9296e4c0..a1ae8c7988c8 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -145,6 +145,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qcs615-qmp-gen3x1-pcie-phy
               - qcom,sar2130p-qmp-gen3x2-pcie-phy
               - qcom,sc8180x-qmp-pcie-phy
               - qcom,sdm845-qhp-pcie-phy
@@ -175,7 +176,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,qcs615-qmp-gen3x1-pcie-phy
               - qcom,sc8280xp-qmp-gen3x1-pcie-phy
               - qcom,sc8280xp-qmp-gen3x2-pcie-phy
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy
-- 
2.34.1

[PATCH v6 2/3] arm64: dts: qcom: qcs615: enable pcie

[Ziyue Zhang]

From: Krishna chaitanya chundru <quic_krichai@quicinc.com>

Add configurations in devicetree for PCIe0, including registers, clocks,
interrupts and phy setting sequence.

Add PCIe lane equalization preset properties for 8 GT/s.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
---
 arch/arm64/boot/dts/qcom/qcs615.dtsi | 145 +++++++++++++++++++++++++++
 1 file changed, 145 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index bfbb21035492..8a25386d5096 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -1066,6 +1066,151 @@ mmss_noc: interconnect@1740000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		pcie: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-qcs615", "qcom,pcie-sm8150";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a";
+			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre1_noc MASTER_PCIE QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0 &apps_smmu 0x400 0x1>,
+				    <0x100 &apps_smmu 0x401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+
+			eq-presets-8gts = /bits/ 16 <0x5555>;
+
+			operating-points-v2 = <&pcie_opp_table>;
+
+			status = "disabled";
+
+			pcie_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <984500 1>;
+				};
+			};
+		};
+
+		pcie_phy: phy@1c0e000 {
+			compatible = "qcom,qcs615-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,qcs615-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>,
-- 
2.34.1

[PATCH v6 3/3] arm64: dts: qcom: qcs615-ride: Enable PCIe interface

[Ziyue Zhang]

From: Krishna chaitanya chundru <quic_krichai@quicinc.com>

Add platform configurations in devicetree for PCIe, board related
gpios, PMIC regulators, etc.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs615-ride.dts | 42 ++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index a6652e4817d1..011f8ae077c2 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -217,6 +217,23 @@ &gcc {
 		 <&sleep_clk>;
 };
 
+&pcie {
+	perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
 &pm8150_gpios {
 	usb2_en: usb2-en-state {
 		pins = "gpio10";
@@ -256,6 +273,31 @@ &rpmhcc {
 	clocks = <&xo_board_clk>;
 };
 
+&tlmm {
+	pcie_default_state: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio90";
+			function = "pcie_clk_req";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio101";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+			pins = "gpio100";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc1_state_on>;
 	pinctrl-1 = <&sdc1_state_off>;
-- 
2.34.1

Re: [PATCH v6 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615

[Johan Hovold]

On Wed, Jun 25, 2025 at 02:32:11PM +0800, Ziyue Zhang wrote:
> QCS615 pcie phy only use 5 clocks, which are aux, cfg_ahb, ref,
> ref_gen, pipe. So move "qcom,qcs615-qmp-gen3x1-pcie-phy" compatible
> from 6 clocks' list to 5 clocks' list.

Please add a Fixes tag pointing out the commit that erroneously
described the PHY as requiring six clocks.

> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>

Johan