From: Mark Rutland <mark.rutland@arm.com>
To: Shrikanth Hegde <sshegde@linux.ibm.com>,
catalin.marinas@arm.com, will@kernel.org
Cc: mingo@redhat.com, peterz@infradead.org, juri.lelli@redhat.com,
vincent.guittot@linaro.org, maddy@linux.ibm.com,
tglx@linutronix.de, bigeasy@linutronix.de, vschneid@redhat.com,
dietmar.eggemann@arm.com, rostedt@goodmis.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/1] sched: preempt: Move dynamic keys into kernel/sched
Date: Mon, 16 Jun 2025 17:37:19 +0100 [thread overview]
Message-ID: <aFBIPxOGbWfTCWLm@J2N7QTR9R3> (raw)
In-Reply-To: <20250610075344.1379597-2-sshegde@linux.ibm.com>
On Tue, Jun 10, 2025 at 01:23:44PM +0530, Shrikanth Hegde wrote:
> Dynamic preemption can be static key or static call based.
> Static key is used to check kernel preemption depending on
> the current preemption model. i.e enable for lazy, full.
>
> Code is spread currently across entry/common.c, arm64 and latest being
> powerpc. There is little arch specific to it. For example, arm64,
> powerpc does the same thing. It is better to move it into kernel/sched
> since preemption is more closely associated with scheduler.
>
> Plus, Any new arch that wants dynamic preemption enabled need to have
> only HAVE_PREEMPT_DYNAMIC_KEY.
>
> This is more of code movement. No functional change.
>
> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
I've tested this on arm64 atop v6.16-rc2, building and booting defconfig
and defconfig + PREEMPT_DYNAMIC=y.
It builds cleanly, boots fine, and I think this is obviously correct
given it's just moving things around, so FWIW:
Acked-by: Mark Rutland <mark.rutland@arm.com>
Catalin, Will, are you happy with this?
I assume this would go via the tip tree?
Mark.
> ---
> arch/arm64/include/asm/preempt.h | 1 -
> arch/arm64/kernel/entry-common.c | 8 --------
> arch/powerpc/include/asm/preempt.h | 16 ----------------
> arch/powerpc/kernel/interrupt.c | 4 ----
> include/linux/entry-common.h | 1 -
> include/linux/sched.h | 8 ++++++++
> kernel/entry/common.c | 1 -
> kernel/sched/core.c | 4 ++++
> 8 files changed, 12 insertions(+), 31 deletions(-)
> delete mode 100644 arch/powerpc/include/asm/preempt.h
>
> diff --git a/arch/arm64/include/asm/preempt.h b/arch/arm64/include/asm/preempt.h
> index 0159b625cc7f..a9348e65d75e 100644
> --- a/arch/arm64/include/asm/preempt.h
> +++ b/arch/arm64/include/asm/preempt.h
> @@ -87,7 +87,6 @@ void preempt_schedule_notrace(void);
>
> #ifdef CONFIG_PREEMPT_DYNAMIC
>
> -DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
> void dynamic_preempt_schedule(void);
> #define __preempt_schedule() dynamic_preempt_schedule()
> void dynamic_preempt_schedule_notrace(void);
> diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
> index b260ddc4d3e9..b1c854fb4884 100644
> --- a/arch/arm64/kernel/entry-common.c
> +++ b/arch/arm64/kernel/entry-common.c
> @@ -259,14 +259,6 @@ static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs)
> lockdep_hardirqs_on(CALLER_ADDR0);
> }
>
> -#ifdef CONFIG_PREEMPT_DYNAMIC
> -DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
> -#define need_irq_preemption() \
> - (static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
> -#else
> -#define need_irq_preemption() (IS_ENABLED(CONFIG_PREEMPTION))
> -#endif
> -
> static void __sched arm64_preempt_schedule_irq(void)
> {
> if (!need_irq_preemption())
> diff --git a/arch/powerpc/include/asm/preempt.h b/arch/powerpc/include/asm/preempt.h
> deleted file mode 100644
> index 000e2b9681f3..000000000000
> --- a/arch/powerpc/include/asm/preempt.h
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef __ASM_POWERPC_PREEMPT_H
> -#define __ASM_POWERPC_PREEMPT_H
> -
> -#include <asm-generic/preempt.h>
> -
> -#if defined(CONFIG_PREEMPT_DYNAMIC)
> -#include <linux/jump_label.h>
> -DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
> -#define need_irq_preemption() \
> - (static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
> -#else
> -#define need_irq_preemption() (IS_ENABLED(CONFIG_PREEMPTION))
> -#endif
> -
> -#endif /* __ASM_POWERPC_PREEMPT_H */
> diff --git a/arch/powerpc/kernel/interrupt.c b/arch/powerpc/kernel/interrupt.c
> index e0c681d0b076..4d62d785ad26 100644
> --- a/arch/powerpc/kernel/interrupt.c
> +++ b/arch/powerpc/kernel/interrupt.c
> @@ -25,10 +25,6 @@
> unsigned long global_dbcr0[NR_CPUS];
> #endif
>
> -#if defined(CONFIG_PREEMPT_DYNAMIC)
> -DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
> -#endif
> -
> #ifdef CONFIG_PPC_BOOK3S_64
> DEFINE_STATIC_KEY_FALSE(interrupt_exit_not_reentrant);
> static inline bool exit_must_hard_disable(void)
> diff --git a/include/linux/entry-common.h b/include/linux/entry-common.h
> index f94f3fdf15fc..8624faa1f8b9 100644
> --- a/include/linux/entry-common.h
> +++ b/include/linux/entry-common.h
> @@ -549,7 +549,6 @@ void raw_irqentry_exit_cond_resched(void);
> DECLARE_STATIC_CALL(irqentry_exit_cond_resched, raw_irqentry_exit_cond_resched);
> #define irqentry_exit_cond_resched() static_call(irqentry_exit_cond_resched)()
> #elif defined(CONFIG_HAVE_PREEMPT_DYNAMIC_KEY)
> -DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
> void dynamic_irqentry_exit_cond_resched(void);
> #define irqentry_exit_cond_resched() dynamic_irqentry_exit_cond_resched()
> #endif
> diff --git a/include/linux/sched.h b/include/linux/sched.h
> index 45e5953b8f32..ebd230382027 100644
> --- a/include/linux/sched.h
> +++ b/include/linux/sched.h
> @@ -2115,6 +2115,14 @@ static inline int _cond_resched(void)
>
> #endif /* !CONFIG_PREEMPTION || CONFIG_PREEMPT_DYNAMIC */
>
> +#if defined(CONFIG_PREEMPT_DYNAMIC) && defined(CONFIG_HAVE_PREEMPT_DYNAMIC_KEY)
> +DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
> +#define need_irq_preemption() \
> + (static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
> +#else
> +#define need_irq_preemption() (IS_ENABLED(CONFIG_PREEMPTION))
> +#endif
> +
> #define cond_resched() ({ \
> __might_resched(__FILE__, __LINE__, 0); \
> _cond_resched(); \
> diff --git a/kernel/entry/common.c b/kernel/entry/common.c
> index a8dd1f27417c..b8ffd7127338 100644
> --- a/kernel/entry/common.c
> +++ b/kernel/entry/common.c
> @@ -268,7 +268,6 @@ void raw_irqentry_exit_cond_resched(void)
> #if defined(CONFIG_HAVE_PREEMPT_DYNAMIC_CALL)
> DEFINE_STATIC_CALL(irqentry_exit_cond_resched, raw_irqentry_exit_cond_resched);
> #elif defined(CONFIG_HAVE_PREEMPT_DYNAMIC_KEY)
> -DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
> void dynamic_irqentry_exit_cond_resched(void)
> {
> if (!static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index 62b3416f5e43..6af2bab187cb 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -7083,6 +7083,10 @@ EXPORT_SYMBOL(dynamic_preempt_schedule_notrace);
>
> #endif /* CONFIG_PREEMPTION */
>
> +#if defined(CONFIG_PREEMPT_DYNAMIC) && defined(CONFIG_HAVE_PREEMPT_DYNAMIC_KEY)
> +DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
> +#endif
> +
> /*
> * This is the entry point to schedule() from kernel preemption
> * off of IRQ context.
> --
> 2.43.0
>
next prev parent reply other threads:[~2025-06-16 16:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-10 7:53 [PATCH 0/1] powerpc, arm64: move preempt dynamic key into kernel/sched Shrikanth Hegde
2025-06-10 7:53 ` [PATCH 1/1] sched: preempt: Move dynamic keys " Shrikanth Hegde
2025-06-13 9:49 ` Shrikanth Hegde
2025-06-16 16:37 ` Mark Rutland [this message]
2025-07-13 4:50 ` Shrikanth Hegde
2025-07-11 14:56 ` Will Deacon
2025-07-14 2:39 ` Madhavan Srinivasan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aFBIPxOGbWfTCWLm@J2N7QTR9R3 \
--to=mark.rutland@arm.com \
--cc=bigeasy@linutronix.de \
--cc=catalin.marinas@arm.com \
--cc=dietmar.eggemann@arm.com \
--cc=juri.lelli@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maddy@linux.ibm.com \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=sshegde@linux.ibm.com \
--cc=tglx@linutronix.de \
--cc=vincent.guittot@linaro.org \
--cc=vschneid@redhat.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).