From: Frank Li <Frank.li@nxp.com>
To: Wei Fang <wei.fang@nxp.com>
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
richardcochran@gmail.com, claudiu.manoil@nxp.com,
vladimir.oltean@nxp.com, xiaoning.wang@nxp.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, vadim.fedorenko@linux.dev,
shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com,
fushi.peng@nxp.com, devicetree@vger.kernel.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, kernel@pengutronix.de
Subject: Re: [PATCH v2 net-next 13/14] net: enetc: don't update sync packet checksum if checksum offload is used
Date: Wed, 16 Jul 2025 17:03:00 -0400 [thread overview]
Message-ID: <aHgThBhKSqlLnX0D@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20250716073111.367382-14-wei.fang@nxp.com>
On Wed, Jul 16, 2025 at 03:31:10PM +0800, Wei Fang wrote:
> For ENETC v4, the hardware has the capability to support Tx checksum
> offload. so the enetc driver does not need to update the UDP checksum
> of PTP sync packets if Tx checksum offload is enabled.
>
> Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/net/ethernet/freescale/enetc/enetc.c | 17 +++++++++--------
> 1 file changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
> index 6e04dd825a95..cf72d50246a9 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc.c
> @@ -247,7 +247,7 @@ static void enetc4_set_one_step_ts(struct enetc_si *si, bool udp, int offset)
> }
>
> static u32 enetc_update_ptp_sync_msg(struct enetc_ndev_priv *priv,
> - struct sk_buff *skb)
> + struct sk_buff *skb, bool csum_offload)
> {
> struct enetc_skb_cb *enetc_cb = ENETC_SKB_CB(skb);
> u16 tstamp_off = enetc_cb->origin_tstamp_off;
> @@ -269,18 +269,17 @@ static u32 enetc_update_ptp_sync_msg(struct enetc_ndev_priv *priv,
> * - 48 bits seconds field
> * - 32 bits nanseconds field
> *
> - * In addition, the UDP checksum needs to be updated
> - * by software after updating originTimestamp field,
> - * otherwise the hardware will calculate the wrong
> - * checksum when updating the correction field and
> - * update it to the packet.
> + * In addition, if csum_offload is false, the UDP checksum needs
> + * to be updated by software after updating originTimestamp field,
> + * otherwise the hardware will calculate the wrong checksum when
> + * updating the correction field and update it to the packet.
> */
>
> data = skb_mac_header(skb);
> new_sec_h = htons((sec >> 32) & 0xffff);
> new_sec_l = htonl(sec & 0xffffffff);
> new_nsec = htonl(nsec);
> - if (enetc_cb->udp) {
> + if (enetc_cb->udp && !csum_offload) {
> struct udphdr *uh = udp_hdr(skb);
> __be32 old_sec_l, old_nsec;
> __be16 old_sec_h;
> @@ -319,6 +318,7 @@ static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb)
> struct enetc_tx_swbd *tx_swbd;
> int len = skb_headlen(skb);
> union enetc_tx_bd temp_bd;
> + bool csum_offload = false;
> union enetc_tx_bd *txbd;
> int i, count = 0;
> skb_frag_t *frag;
> @@ -345,6 +345,7 @@ static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb)
> temp_bd.l4_aux = FIELD_PREP(ENETC_TX_BD_L4T,
> ENETC_TXBD_L4T_UDP);
> flags |= ENETC_TXBD_FLAGS_CSUM_LSO | ENETC_TXBD_FLAGS_L4CS;
> + csum_offload = true;
> } else if (skb_checksum_help(skb)) {
> return 0;
> }
> @@ -352,7 +353,7 @@ static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb)
>
> if (enetc_cb->flag & ENETC_F_TX_ONESTEP_SYNC_TSTAMP) {
> do_onestep_tstamp = true;
> - tstamp = enetc_update_ptp_sync_msg(priv, skb);
> + tstamp = enetc_update_ptp_sync_msg(priv, skb, csum_offload);
> } else if (enetc_cb->flag & ENETC_F_TX_TSTAMP) {
> do_twostep_tstamp = true;
> }
> --
> 2.34.1
>
next prev parent reply other threads:[~2025-07-16 21:03 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-16 7:30 [PATCH v2 net-next 00/14] Add NETC Timer PTP driver and add PTP support for i.MX95 Wei Fang
2025-07-16 7:30 ` [PATCH v2 net-next 01/14] dt-bindings: ptp: add NETC Timer PTP clock Wei Fang
2025-07-16 19:19 ` Frank Li
2025-07-17 7:40 ` Krzysztof Kozlowski
2025-07-17 8:30 ` Wei Fang
2025-07-17 9:05 ` Vladimir Oltean
2025-07-17 9:55 ` Wei Fang
2025-07-17 12:42 ` Vladimir Oltean
2025-07-17 15:06 ` Frank Li
2025-07-22 14:36 ` Vladimir Oltean
2025-07-22 18:25 ` Frank Li
2025-07-17 10:04 ` Krzysztof Kozlowski
2025-07-17 10:28 ` Wei Fang
2025-07-16 7:30 ` [PATCH v2 net-next 02/14] dt-bindings: net: add nxp,netc-timer property Wei Fang
2025-07-16 19:28 ` Frank Li
2025-07-17 3:23 ` Wei Fang
2025-07-17 7:42 ` Krzysztof Kozlowski
2025-07-17 8:32 ` Wei Fang
2025-07-17 9:12 ` Krzysztof Kozlowski
2025-07-17 9:49 ` Wei Fang
2025-07-17 10:06 ` Krzysztof Kozlowski
2025-07-17 10:26 ` Wei Fang
2025-07-18 7:46 ` Krzysztof Kozlowski
2025-07-18 7:50 ` Krzysztof Kozlowski
2025-07-18 12:01 ` Vladimir Oltean
2025-07-21 6:00 ` Wei Fang
2025-07-21 12:23 ` Krzysztof Kozlowski
2025-07-16 7:31 ` [PATCH v2 net-next 03/14] ptp: netc: add NETC Timer PTP driver support Wei Fang
2025-07-16 19:58 ` Frank Li
2025-07-17 8:42 ` Wei Fang
2025-07-23 16:09 ` Vladimir Oltean
2025-07-24 2:36 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 04/14] ptp: netc: add PTP_CLK_REQ_PPS support Wei Fang
2025-07-16 20:05 ` Frank Li
2025-07-17 11:59 ` Wei Fang
2025-07-17 15:15 ` Frank Li
2025-07-18 2:08 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 05/14] ptp: netc: add periodic pulse output support Wei Fang
2025-07-16 20:26 ` Frank Li
2025-07-17 12:11 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 06/14] ptp: netc: add external trigger stamp support Wei Fang
2025-07-16 20:30 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 07/14] ptp: netc: add debugfs support to loop back pulse signal Wei Fang
2025-07-16 20:32 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 08/14] MAINTAINERS: add NETC Timer PTP clock driver section Wei Fang
2025-07-16 20:33 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 09/14] net: enetc: save the parsed information of PTP packet to skb->cb Wei Fang
2025-07-16 20:46 ` Frank Li
2025-07-17 12:20 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 10/14] net: enetc: Add enetc_update_ptp_sync_msg() to process PTP sync packet Wei Fang
2025-07-16 20:49 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 11/14] net: enetc: remove unnecessary CONFIG_FSL_ENETC_PTP_CLOCK check Wei Fang
2025-07-16 20:50 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 12/14] net: enetc: add PTP synchronization support for ENETC v4 Wei Fang
2025-07-16 21:01 ` Frank Li
2025-07-17 12:35 ` Wei Fang
2025-07-17 22:07 ` Frank Li
2025-07-18 2:08 ` Wei Fang
2025-07-22 12:57 ` Vladimir Oltean
2025-07-22 13:41 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 13/14] net: enetc: don't update sync packet checksum if checksum offload is used Wei Fang
2025-07-16 21:03 ` Frank Li [this message]
2025-07-16 7:31 ` [PATCH v2 14/14] arm64: dts: imx95: Add NETC Timer support Wei Fang
2025-07-16 21:04 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aHgThBhKSqlLnX0D@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=andrew+netdev@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=festevam@gmail.com \
--cc=fushi.peng@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vadim.fedorenko@linux.dev \
--cc=vladimir.oltean@nxp.com \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).