From: Mostafa Saleh <smostafa@google.com>
To: Ben Horgan <ben.horgan@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kvmarm@lists.linux.dev,
catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
oliver.upton@linux.dev, joey.gouly@arm.com,
suzuki.poulose@arm.com, yuzenghui@huawei.com, qperret@google.com,
keirf@google.com
Subject: Re: [PATCH 2/2] KVM: arm64: Map hyp text as RO and dump instr on panic
Date: Fri, 18 Jul 2025 10:22:55 +0000 [thread overview]
Message-ID: <aHogf50CvjeSklRo@google.com> (raw)
In-Reply-To: <38b08607-b9d9-425b-81c4-b227dda427b3@arm.com>
Hi Ben,
On Fri, Jul 18, 2025 at 11:16:18AM +0100, Ben Horgan wrote:
> Hi Mostafa,
>
> On 18/07/2025 00:47, Mostafa Saleh wrote:
> > Map the hyp text section as RO, there are no secrets there
> > and that allows the kernel extract info for debugging.
> >
> > As in case of panic we can now dump the faulting instructions
> > similar to the kernel.
> >
> > Signed-off-by: Mostafa Saleh <smostafa@google.com>
> > ---
> > arch/arm64/kvm/handle_exit.c | 4 +---
> > arch/arm64/kvm/hyp/nvhe/setup.c | 12 ++++++++++--
> > 2 files changed, 11 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
> > index de12b4d4bccd..d59f33c40767 100644
> > --- a/arch/arm64/kvm/handle_exit.c
> > +++ b/arch/arm64/kvm/handle_exit.c
> > @@ -566,9 +566,7 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr,
> > kvm_nvhe_dump_backtrace(hyp_offset);
> > /* Dump the faulting instruction */
> > - if (!is_protected_kvm_enabled() ||
> > - IS_ENABLED(CONFIG_NVHE_EL2_DEBUG))
> > - dump_instr(panic_addr + kaslr_offset());
> > + dump_instr(panic_addr + kaslr_offset());
> This makes the dumping in nvhe no longer conditional on
> CONFIG_NVHE_EL2_DEBUG. A change from what you introduced in the patch.
> Perhaps it makes sense to reorder the patches; do the preparatory work for
> instruction dumping before the enabling.>
Yes, I thought about squashing both patches, but I was worried this patch
might be more controversial, so I split the code into 2 patches, where the
first one can be merged separately if needed. But no strong opinion.
Thanks,
Mostafa
> > /*
> > * Hyp has panicked and we're going to handle that by panicking the
> > diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c
> > index a48d3f5a5afb..90bd014e952f 100644
> > --- a/arch/arm64/kvm/hyp/nvhe/setup.c
> > +++ b/arch/arm64/kvm/hyp/nvhe/setup.c
> > @@ -192,6 +192,7 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
> > enum pkvm_page_state state;
> > struct hyp_page *page;
> > phys_addr_t phys;
> > + enum kvm_pgtable_prot prot;
> > if (!kvm_pte_valid(ctx->old))
> > return 0;
> > @@ -210,11 +211,18 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
> > * configured in the hypervisor stage-1, and make sure to propagate them
> > * to the hyp_vmemmap state.
> > */
> > - state = pkvm_getstate(kvm_pgtable_hyp_pte_prot(ctx->old));
> > + prot = kvm_pgtable_hyp_pte_prot(ctx->old);
> > + state = pkvm_getstate(prot);
> > switch (state) {
> > case PKVM_PAGE_OWNED:
> > set_hyp_state(page, PKVM_PAGE_OWNED);
> > - return host_stage2_set_owner_locked(phys, PAGE_SIZE, PKVM_ID_HYP);
> > + /* hyp text is RO in the host stage-2 to be inspected on panic. */
> > + if (prot == PAGE_HYP_EXEC) {
> > + set_host_state(page, PKVM_NOPAGE);
> > + return host_stage2_idmap_locked(phys, PAGE_SIZE, KVM_PGTABLE_PROT_R);
> > + } else {
> > + return host_stage2_set_owner_locked(phys, PAGE_SIZE, PKVM_ID_HYP);
> > + }
> > case PKVM_PAGE_SHARED_OWNED:
> > set_hyp_state(page, PKVM_PAGE_SHARED_OWNED);
> > set_host_state(page, PKVM_PAGE_SHARED_BORROWED);
> --
> Thanks,
>
> Ben
>
next prev parent reply other threads:[~2025-07-18 10:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-17 23:47 [PATCH 0/2] Dump instructions on panic for pKVM/nvhe Mostafa Saleh
2025-07-17 23:47 ` [PATCH 1/2] KVM: arm64: Dump instruction on hyp panic Mostafa Saleh
2025-07-31 12:58 ` Kunwu Chan
2025-07-31 13:05 ` Mostafa Saleh
2025-08-01 8:00 ` Kunwu Chan
2025-07-17 23:47 ` [PATCH 2/2] KVM: arm64: Map hyp text as RO and dump instr on panic Mostafa Saleh
2025-07-18 10:16 ` Ben Horgan
2025-07-18 10:22 ` Mostafa Saleh [this message]
2025-07-18 10:35 ` Ben Horgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aHogf50CvjeSklRo@google.com \
--to=smostafa@google.com \
--cc=ben.horgan@arm.com \
--cc=catalin.marinas@arm.com \
--cc=joey.gouly@arm.com \
--cc=keirf@google.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=oliver.upton@linux.dev \
--cc=qperret@google.com \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).