[PATCH 0/2] arm64: dts: lx2160a-cex7/lx2160a-clearfog-cx: add missing descriptions

[PATCH 0/2] arm64: dts: lx2160a-cex7/lx2160a-clearfog-cx: add missing descriptions

[Josua Mayer]

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
Josua Mayer (2):
      arm64: dts: lx2160a-cex7: add interrupts for rtc and ethernet phy
      arm64: dts: lx2160a-clearfog-itx: enable pcie nodes for x4 and x8 slots

 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi         | 2 ++
 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 8 ++++++++
 2 files changed, 10 insertions(+)
---
base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585
change-id: 20250825-lx2160-clearfog-omissions-379bde1578f7

Best regards,
-- 
Josua Mayer <josua@solid-run.com>

[PATCH 1/2] arm64: dts: lx2160a-cex7: add interrupts for rtc and ethernet phy

[Josua Mayer]

SolidRun LX2160A CEX-7 module has interrupts wired for both the rtc and
ethernet phy.

Add description for those interrupts to the rtc and phy nodes.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index e4b727070814f9183904a7384c47229e364186b5..eec2cd6c6d32a72c332223f15d195878bb65d7f4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -41,6 +41,7 @@ &emdio1 {
 	rgmii_phy1: ethernet-phy@1 {
 		reg = <1>;
 		qca,smarteee-tw-us-1g = <24>;
+		interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
 
@@ -156,6 +157,7 @@ &i2c4 {
 	rtc@51 {
 		compatible = "nxp,pcf2129";
 		reg = <0x51>;
+		interrupts-extended = <&gpio2 8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 

-- 
2.43.0

[PATCH 2/2] arm64: dts: lx2160a-clearfog-itx: enable pcie nodes for x4 and x8 slots

[Josua Mayer]

SolidRun Clearfog CX and Honeycomb have LX2160A PEX3 and PEX5 exposed on
physical connectors.

Vendor U-Boot used to patch status properties such that it went
undiscovered these nodes have their status set disabled.

Set status okay for pcie3 and pcie5 nodes.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index a7dcbecc1f41b5387fdfc0e6c449e97bab0398cd..af6258b2fe82654615ba9b899928d4dd1339d573 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -96,6 +96,14 @@ &esdhc0 {
 	status = "okay";
 };
 
+&pcie3 {
+	status = "okay";
+};
+
+&pcie5 {
+	status = "okay";
+};
+
 &pcs_mdio7 {
 	status = "okay";
 };

-- 
2.43.0

Re: [PATCH 0/2] arm64: dts: lx2160a-cex7/lx2160a-clearfog-cx: add missing descriptions

[Shawn Guo]

On Mon, Aug 25, 2025 at 08:00:54PM +0200, Josua Mayer wrote:
> Josua Mayer (2):
>       arm64: dts: lx2160a-cex7: add interrupts for rtc and ethernet phy
>       arm64: dts: lx2160a-clearfog-itx: enable pcie nodes for x4 and x8 slots

Applied both, thanks!