From: "Dr. David Alan Gilbert" <linux@treblig.org>
To: Loic Poulain <loic.poulain@oss.qualcomm.com>
Cc: wcn36xx@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] wifi: wcn36xx: Remove unused wcn36xx_smd_update_scan_params
Date: Thu, 9 Oct 2025 15:25:39 +0000 [thread overview]
Message-ID: <aOfT806hw7l2BeJu@gallifrey> (raw)
In-Reply-To: <CAFEp6-3U2rQEUtntb0cdJeykURocEZQdeVHXFbXXogZV=wxGWg@mail.gmail.com>
* Loic Poulain (loic.poulain@oss.qualcomm.com) wrote:
> On Thu, Jun 19, 2025 at 3:05 AM <linux@treblig.org> wrote:
> >
> > From: "Dr. David Alan Gilbert" <linux@treblig.org>
> >
> > wcn36xx_smd_update_scan_params() last use was removed in 2020 by
> > commit 5973a2947430 ("wcn36xx: Fix software-driven scan")
> >
> > Remove it.
> >
> > Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
>
> Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Hi Loic,
Is this getting into a pull somewhere?
Dave
>
> > ---
> > drivers/net/wireless/ath/wcn36xx/smd.c | 60 --------------------------
> > drivers/net/wireless/ath/wcn36xx/smd.h | 1 -
> > 2 files changed, 61 deletions(-)
> >
> > diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
> > index 2cf86fc3f8fe..136acc414714 100644
> > --- a/drivers/net/wireless/ath/wcn36xx/smd.c
> > +++ b/drivers/net/wireless/ath/wcn36xx/smd.c
> > @@ -1127,66 +1127,6 @@ int wcn36xx_smd_process_ptt_msg(struct wcn36xx *wcn,
> > return ret;
> > }
> >
> > -static int wcn36xx_smd_update_scan_params_rsp(void *buf, size_t len)
> > -{
> > - struct wcn36xx_hal_update_scan_params_resp *rsp;
> > -
> > - rsp = buf;
> > -
> > - /* Remove the PNO version bit */
> > - rsp->status &= (~(WCN36XX_FW_MSG_PNO_VERSION_MASK));
> > -
> > - if (WCN36XX_FW_MSG_RESULT_SUCCESS != rsp->status) {
> > - wcn36xx_warn("error response from update scan\n");
> > - return rsp->status;
> > - }
> > -
> > - return 0;
> > -}
> > -
> > -int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn,
> > - u8 *channels, size_t channel_count)
> > -{
> > - struct wcn36xx_hal_update_scan_params_req_ex msg_body;
> > - int ret;
> > -
> > - mutex_lock(&wcn->hal_mutex);
> > - INIT_HAL_MSG(msg_body, WCN36XX_HAL_UPDATE_SCAN_PARAM_REQ);
> > -
> > - msg_body.dot11d_enabled = false;
> > - msg_body.dot11d_resolved = true;
> > -
> > - msg_body.channel_count = channel_count;
> > - memcpy(msg_body.channels, channels, channel_count);
> > - msg_body.active_min_ch_time = 60;
> > - msg_body.active_max_ch_time = 120;
> > - msg_body.passive_min_ch_time = 60;
> > - msg_body.passive_max_ch_time = 110;
> > - msg_body.state = PHY_SINGLE_CHANNEL_CENTERED;
> > -
> > - PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
> > -
> > - wcn36xx_dbg(WCN36XX_DBG_HAL,
> > - "hal update scan params channel_count %d\n",
> > - msg_body.channel_count);
> > -
> > - ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len);
> > - if (ret) {
> > - wcn36xx_err("Sending hal_update_scan_params failed\n");
> > - goto out;
> > - }
> > - ret = wcn36xx_smd_update_scan_params_rsp(wcn->hal_buf,
> > - wcn->hal_rsp_len);
> > - if (ret) {
> > - wcn36xx_err("hal_update_scan_params response failed err=%d\n",
> > - ret);
> > - goto out;
> > - }
> > -out:
> > - mutex_unlock(&wcn->hal_mutex);
> > - return ret;
> > -}
> > -
> > static int wcn36xx_smd_add_sta_self_rsp(struct wcn36xx *wcn,
> > struct ieee80211_vif *vif,
> > void *buf,
> > diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
> > index 2c1ed9e570bf..4e39df5589b3 100644
> > --- a/drivers/net/wireless/ath/wcn36xx/smd.h
> > +++ b/drivers/net/wireless/ath/wcn36xx/smd.h
> > @@ -66,7 +66,6 @@ int wcn36xx_smd_finish_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode,
> > int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode,
> > struct ieee80211_vif *vif);
> >
> > -int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn, u8 *channels, size_t channel_count);
> > int wcn36xx_smd_start_hw_scan(struct wcn36xx *wcn, struct ieee80211_vif *vif,
> > struct cfg80211_scan_request *req);
> > int wcn36xx_smd_stop_hw_scan(struct wcn36xx *wcn);
> > --
> > 2.49.0
> >
>
--
-----Open up your eyes, open up your mind, open up your code -------
/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \
\ dave @ treblig.org | | In Hex /
\ _________________________|_____ http://www.treblig.org |_______/
next prev parent reply other threads:[~2025-10-09 15:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-19 1:05 [PATCH] wifi: wcn36xx: Remove unused wcn36xx_smd_update_scan_params linux
2025-06-22 9:10 ` Loic Poulain
2025-10-09 15:25 ` Dr. David Alan Gilbert [this message]
2025-10-09 22:15 ` Loic Poulain
2025-10-10 0:08 ` Jeff Johnson
2025-10-10 0:46 ` Dr. David Alan Gilbert
2025-10-10 19:13 ` Loic Poulain
2025-10-10 20:07 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aOfT806hw7l2BeJu@gallifrey \
--to=linux@treblig.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=wcn36xx@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox