Re: [PATCH v5] platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Wed, Nov 26, 2025 at 10:14:33PM +0800, Baojun Xu wrote:
> The tas2781-hda supports multi-projects. In some projects, GpioInt() was
> dropped due to no IRQ connection. See the example code below:
> 
> Device (SPKR)
> {
>     Name (_ADR, One)
>     Name (_HID, "TXNW2781")
>     Method (_CRS, 0, NotSerialized)
>     {
>         Name (RBUF, ResourceTemplate ()
>         {
>             I2cSerialBusV2 (0x0038, ...)
>             I2cSerialBusV2 (0x0039, ...)
>             // GpioInt (Edge, ...) { 0x0000 }
>             //"GpioInt (...) {}" was commented out due to no IRQ connection.
>         })
>         Return (RBUF)
>     }
> }
> 
> But in smi_i2c_probe(), smi_spi_probe() (serial-multi-instantiate.c), if
> looking for IRQ by smi_get_irq() fails, it will return an error, will not add
> new device, and cause smi_probe() to fail:
> 
> [    2.356546] Serial bus multi instantiate pseudo device driver TXNW2781:00:
> error -ENXIO: IRQ index 0 not found
> [    2.356561] Serial bus multi instantiate pseudo device driver TXNW2781:00:
> error -ENXIO: Error requesting irq at index 0
> 
> So, we need to add an exception case for these situations. BTW, this patch
> will take effect on both I2C and SPI devices.

Thanks, excellent!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

-- 
With Best Regards,
Andy Shevchenko