Re: [PATCH 1/2] usb: typec: ucsi: psy: Fix ucsi_psy_get_current_now in non-PD cases

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

Mon, Dec 08, 2025 at 05:48:47PM +0000, Benson Leung kirjoitti:
> current_now would always return 0 in for non-PD power sources, and the
> negotiated current based on the Request RDO in PD mode.
> 
> For USB Type-C current or legacy Default USB cases current_now will present
> the max value of those modes, as that is the equivalent of the Request RDO
> in PD.
> 
> Also, current_now will now return 0 when the port is disconnected to match
> the same behavior of current_max.
> 
> Signed-off-by: Benson Leung <bleung@chromium.org>

Looks good to me. Shouldn't this be applied also to the stable trees?

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/ucsi/psy.c | 24 +++++++++++++++++++++---
>  1 file changed, 21 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/typec/ucsi/psy.c b/drivers/usb/typec/ucsi/psy.c
> index 3abe9370ffaa..b828719e33df 100644
> --- a/drivers/usb/typec/ucsi/psy.c
> +++ b/drivers/usb/typec/ucsi/psy.c
> @@ -202,10 +202,28 @@ static int ucsi_psy_get_current_max(struct ucsi_connector *con,
>  static int ucsi_psy_get_current_now(struct ucsi_connector *con,
>  				    union power_supply_propval *val)
>  {
> -	if (UCSI_CONSTAT(con, PWR_OPMODE) == UCSI_CONSTAT_PWR_OPMODE_PD)
> -		val->intval = rdo_op_current(con->rdo) * 1000;
> -	else
> +	if (!UCSI_CONSTAT(con, CONNECTED)) {
>  		val->intval = 0;
> +		return 0;
> +	}
> +
> +	switch (UCSI_CONSTAT(con, PWR_OPMODE)) {
> +	case UCSI_CONSTAT_PWR_OPMODE_PD:
> +		val->intval = rdo_op_current(con->rdo) * 1000;
> +		break;
> +	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
> +		val->intval = UCSI_TYPEC_1_5_CURRENT * 1000;
> +		break;
> +	case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
> +		val->intval = UCSI_TYPEC_3_0_CURRENT * 1000;
> +		break;
> +	case UCSI_CONSTAT_PWR_OPMODE_BC:
> +	case UCSI_CONSTAT_PWR_OPMODE_DEFAULT:
> +	/* UCSI can't tell b/w DCP/CDP or USB2/3x1/3x2 SDP chargers */
> +	default:
> +		val->intval = UCSI_TYPEC_DEFAULT_CURRENT * 1000;
> +		break;
> +	}
>  	return 0;
>  }
>  
> -- 
> 2.52.0.223.gf5cc29aaa4-goog

-- 
heikki