Re: [PATCH net-next 3/4] net: phy: realtek: use paged access for MDIO_MMD_VEND2 in C22 mode

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Sun, Jan 04, 2026 at 01:12:13PM +0000, Daniel Golle wrote:
> +static int rtl822xb_read_mmd(struct phy_device *phydev, int devnum, u16 reg)
> +{
> +	int oldpage, ret, read_ret;
> +	u16 page;
> +
> +	/* Use Clause-45 bus access in case it is available */
> +	if (phydev->is_c45)
> +		return __mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr,
> +					  devnum, mmdreg);
> +
> +	/* Use indirect access via MII_MMD_CTRL and MII_MMD_DATA for all
> +	 * MMDs except MDIO_MMD_VEND2
> +	 */
> +	if (devnum != MDIO_MMD_VEND2) {
> +		__mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
> +				MII_MMD_CTRL, devnum);
> +		__mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
> +				MII_MMD_DATA, mmdreg);
> +		__mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
> +				MII_MMD_CTRL, devnum | MII_MMD_CTRL_NOINCR);
> +
> +		return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
> +				       MII_MMD_DATA);
> +	}

I think I'd prefer this structure:

	if (devnum != MDIO_MMD_VEND2)
		return mmd_phy_read(phydev->mdio.bus, phydev->mdio.addr,
				    phydev->is_c45, devnum, regad);

	if (phydev->is_c45)
		return __mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr,
					  devnum, mmdreg);

rather than open-coding the indirect access, or the reverse order with
mmd_phy_read() called with is_c45 set to false.

Same for the write function.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!