public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Vitaly Chikunov <vt@altlinux.org>
To: Tim Bird <tim.bird@sony.com>
Cc: herbert@gondor.apana.org.au, davem@davemloft.net,
	lukas@wunner.de,  ignat@cloudflare.com, stefanb@linux.ibm.com,
	smueller@chronox.de, ajgrothe@yahoo.com,
	 salvatore.benedetto@intel.com, dhowells@redhat.com,
	linux-crypto@vger.kernel.org,  linux-spdx@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] crypto: Add SPDX ids to some files
Date: Thu, 19 Feb 2026 04:08:00 +0300	[thread overview]
Message-ID: <aZZiNnEEIvAKgtGj@altlinux.org> (raw)
In-Reply-To: <20260219000939.276256-1-tim.bird@sony.com>

Tim,

On Wed, Feb 18, 2026 at 05:09:38PM -0700, Tim Bird wrote:
> Add SDPX-License-Identifier ID lines to assorted C files in the
> crypto directory, that are missing them.  Remove licensing text,
> except in cases where the text itself says that the notice must
> be retained.

You are saying "except" but in at least two cases in this patch you
removing the following text: "retain the above copyright notice, this
list of conditions and the following disclaimer." Aren't it should be
retained?

Also, in one case below you skip dual-licensing in SPDX record.

Cam you also state in the commit message the reason why you are removing
existing license texts at all and not just adding SPDX?

> 
> Signed-off-by: Tim Bird <tim.bird@sony.com>
> 
> ---
> Note that this does not finish adding SPDX id lines to all the
> files, as there are a few special cases with weird license texts.
> ---
>  crypto/algif_rng.c           |  1 +
>  crypto/anubis.c              |  7 +------
>  crypto/drbg.c                |  1 +
>  crypto/ecc.c                 | 22 +---------------------
>  crypto/fcrypt.c              | 33 +--------------------------------
>  crypto/jitterentropy-kcapi.c |  1 +
>  crypto/jitterentropy.c       |  1 +
>  crypto/khazad.c              |  7 +------
>  crypto/md4.c                 |  7 +------
>  crypto/wp512.c               |  7 +------
>  10 files changed, 10 insertions(+), 77 deletions(-)
> 
> diff --git a/crypto/algif_rng.c b/crypto/algif_rng.c
> index 1a86e40c8372..a9dffe53e85a 100644
> --- a/crypto/algif_rng.c
> +++ b/crypto/algif_rng.c
> @@ -1,3 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
>  /*
>   * algif_rng: User-space interface for random number generators
>   *
> diff --git a/crypto/anubis.c b/crypto/anubis.c
> index 4b01b6ec961a..18b359883d99 100644
> --- a/crypto/anubis.c
> +++ b/crypto/anubis.c
> @@ -1,3 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
>  /*
>   * Cryptographic API.
>   *
> @@ -21,12 +22,6 @@
>   * have put this under the GNU General Public License.
>   *
>   * By Aaron Grothe ajgrothe@yahoo.com, October 28, 2004
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
>   */
>  
>  #include <crypto/algapi.h>
> diff --git a/crypto/drbg.c b/crypto/drbg.c
> index 5e7ed5f5c192..410cecc45ab9 100644
> --- a/crypto/drbg.c
> +++ b/crypto/drbg.c
> @@ -1,3 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
>  /*
>   * DRBG: Deterministic Random Bits Generator
>   *       Based on NIST Recommended DRBG from NIST SP800-90A with the following
> diff --git a/crypto/ecc.c b/crypto/ecc.c
> index 2808b3d5f483..c38e4bc0d613 100644
> --- a/crypto/ecc.c
> +++ b/crypto/ecc.c
> @@ -1,27 +1,7 @@
> +// SPDX-License-Identifier: BSD-2-Clause

The file also have the line:

  MODULE_LICENSE("Dual BSD/GPL");

Thanks,

>  /*
>   * Copyright (c) 2013, 2014 Kenneth MacKay. All rights reserved.
>   * Copyright (c) 2019 Vitaly Chikunov <vt@altlinux.org>
> - *
> - * Redistribution and use in source and binary forms, with or without
> - * modification, are permitted provided that the following conditions are
> - * met:
> - *  * Redistributions of source code must retain the above copyright
> - *   notice, this list of conditions and the following disclaimer.
> - *  * Redistributions in binary form must reproduce the above copyright
> - *    notice, this list of conditions and the following disclaimer in the
> - *    documentation and/or other materials provided with the distribution.
> - *
> - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>   */
>  
>  #include <crypto/ecc_curve.h>
> diff --git a/crypto/fcrypt.c b/crypto/fcrypt.c
> index 80036835cec5..63c542ec5b85 100644
> --- a/crypto/fcrypt.c
> +++ b/crypto/fcrypt.c
> @@ -1,45 +1,14 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
>  /* FCrypt encryption algorithm
>   *
>   * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
>   * Written by David Howells (dhowells@redhat.com)
>   *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * as published by the Free Software Foundation; either version
> - * 2 of the License, or (at your option) any later version.
> - *
>   * Based on code:
>   *
>   * Copyright (c) 1995 - 2000 Kungliga Tekniska Högskolan
>   * (Royal Institute of Technology, Stockholm, Sweden).
>   * All rights reserved.
> - *
> - * Redistribution and use in source and binary forms, with or without
> - * modification, are permitted provided that the following conditions
> - * are met:
> - *
> - * 1. Redistributions of source code must retain the above copyright
> - *    notice, this list of conditions and the following disclaimer.
> - *
> - * 2. Redistributions in binary form must reproduce the above copyright
> - *    notice, this list of conditions and the following disclaimer in the
> - *    documentation and/or other materials provided with the distribution.
> - *
> - * 3. Neither the name of the Institute nor the names of its contributors
> - *    may be used to endorse or promote products derived from this software
> - *    without specific prior written permission.
> - *
> - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
> - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> - * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
> - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> - * SUCH DAMAGE.
>   */
>  
>  #include <asm/byteorder.h>
> diff --git a/crypto/jitterentropy-kcapi.c b/crypto/jitterentropy-kcapi.c
> index 7c880cf34c52..ad1d60252a96 100644
> --- a/crypto/jitterentropy-kcapi.c
> +++ b/crypto/jitterentropy-kcapi.c
> @@ -1,3 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
>  /*
>   * Non-physical true random number generator based on timing jitter --
>   * Linux Kernel Crypto API specific code
> diff --git a/crypto/jitterentropy.c b/crypto/jitterentropy.c
> index 3f93cdc9a7af..1ff0d5800b72 100644
> --- a/crypto/jitterentropy.c
> +++ b/crypto/jitterentropy.c
> @@ -1,3 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
>  /*
>   * Non-physical true random number generator based on timing jitter --
>   * Jitter RNG standalone code.
> diff --git a/crypto/khazad.c b/crypto/khazad.c
> index dee54ad5f0e4..0868e0fb6ad9 100644
> --- a/crypto/khazad.c
> +++ b/crypto/khazad.c
> @@ -1,3 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
>  /*
>   * Cryptographic API.
>   *
> @@ -11,12 +12,6 @@
>   * have put this under the GNU General Public License.
>   *
>   * By Aaron Grothe ajgrothe@yahoo.com, August 1, 2004
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
>   */
>  
>  #include <crypto/algapi.h>
> diff --git a/crypto/md4.c b/crypto/md4.c
> index 55bf47e23c13..3f04b1a2e839 100644
> --- a/crypto/md4.c
> +++ b/crypto/md4.c
> @@ -1,3 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
>  /* 
>   * Cryptographic API.
>   *
> @@ -13,12 +14,6 @@
>   * Copyright (c) Cryptoapi developers.
>   * Copyright (c) 2002 David S. Miller (davem@redhat.com)
>   * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
>   */
>  #include <crypto/internal/hash.h>
>  #include <linux/init.h>
> diff --git a/crypto/wp512.c b/crypto/wp512.c
> index 229b189a7988..1c9acdf007f3 100644
> --- a/crypto/wp512.c
> +++ b/crypto/wp512.c
> @@ -1,3 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
>  /*
>   * Cryptographic API.
>   *
> @@ -12,12 +13,6 @@
>   * have put this under the GNU General Public License.
>   *
>   * By Aaron Grothe ajgrothe@yahoo.com, August 23, 2004
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
>   */
>  #include <crypto/internal/hash.h>
>  #include <linux/init.h>
> -- 
> 2.43.0
> 

  reply	other threads:[~2026-02-19  1:16 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-19  0:09 [PATCH] crypto: Add SPDX ids to some files Tim Bird
2026-02-19  1:08 ` Vitaly Chikunov [this message]
2026-02-19 23:21   ` Bird, Tim
2026-02-19  3:07 ` Richard Fontana
2026-02-20  0:02   ` Bird, Tim
2026-02-20 18:29     ` Richard Fontana

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aZZiNnEEIvAKgtGj@altlinux.org \
    --to=vt@altlinux.org \
    --cc=ajgrothe@yahoo.com \
    --cc=davem@davemloft.net \
    --cc=dhowells@redhat.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=ignat@cloudflare.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spdx@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=salvatore.benedetto@intel.com \
    --cc=smueller@chronox.de \
    --cc=stefanb@linux.ibm.com \
    --cc=tim.bird@sony.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox