public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Yuanshen Cao <alex.caoys@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] usb: typec: tcpm: Add vid and chip info for Etek ET7304
Date: Mon, 23 Feb 2026 17:09:17 +0200	[thread overview]
Message-ID: <aZxtncdzuUejRVF3@kuha> (raw)
In-Reply-To: <20260220-et7304-v3-2-ede2d9634957@gmail.com>

Fri, Feb 20, 2026 at 06:22:41AM +0000, Yuanshen Cao wrote:
> Move VID field to chip info to accommodate different VIDs.
> Add chip info for Etek Micro ET7304. ET7304 is functionally
> identical to the Richtek RT1715, with the only difference
> being the VID.
> 
> Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/tcpm/tcpci_rt1711h.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> index 88c50b984e8a..37cf55ad74f8 100644
> --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> @@ -19,9 +19,11 @@
>  #include <linux/regulator/consumer.h>
>  
>  #define RT1711H_VID		0x29CF
> +#define ET7304_VID		0x6DCF
>  #define RT1711H_PID		0x1711
>  #define RT1711H_DID		0x2171
>  #define RT1715_DID		0x2173
> +#define ET7304_DID		0x2173
>  
>  #define RT1711H_PHYCTRL1	0x80
>  #define RT1711H_PHYCTRL2	0x81
> @@ -55,6 +57,7 @@
>  
>  struct rt1711h_chip_info {
>  	u32 rxdz_sel;
> +	u16 vid;
>  	u16 did;
>  	bool enable_pd30_extended_message;
>  };
> @@ -308,7 +311,7 @@ static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *c
>  	ret = i2c_smbus_read_word_data(i2c, TCPC_VENDOR_ID);
>  	if (ret < 0)
>  		return ret;
> -	if (ret != RT1711H_VID) {
> +	if (ret != chip->info->vid) {
>  		dev_err(&i2c->dev, "vid is not correct, 0x%04x\n", ret);
>  		return -ENODEV;
>  	}
> @@ -405,17 +408,27 @@ static void rt1711h_remove(struct i2c_client *client)
>  	tcpci_unregister_port(chip->tcpci);
>  }
>  
> +static const struct rt1711h_chip_info et7304 = {
> +	.rxdz_sel = RT1711H_BMCIO_RXDZSEL,
> +	.vid = ET7304_VID,
> +	.did = ET7304_DID,
> +	.enable_pd30_extended_message = true,
> +};
> +
>  static const struct rt1711h_chip_info rt1711h = {
> +	.vid = RT1711H_VID,
>  	.did = RT1711H_DID,
>  };
>  
>  static const struct rt1711h_chip_info rt1715 = {
>  	.rxdz_sel = RT1711H_BMCIO_RXDZSEL,
> +	.vid = RT1711H_VID,
>  	.did = RT1715_DID,
>  	.enable_pd30_extended_message = true,
>  };
>  
>  static const struct i2c_device_id rt1711h_id[] = {
> +	{ "et7304", (kernel_ulong_t)&et7304 },
>  	{ "rt1711h", (kernel_ulong_t)&rt1711h },
>  	{ "rt1715", (kernel_ulong_t)&rt1715 },
>  	{}
> @@ -423,6 +436,7 @@ static const struct i2c_device_id rt1711h_id[] = {
>  MODULE_DEVICE_TABLE(i2c, rt1711h_id);
>  
>  static const struct of_device_id rt1711h_of_match[] = {
> +	{ .compatible = "etekmicro,et7304", .data = &et7304 },
>  	{ .compatible = "richtek,rt1711h", .data = &rt1711h },
>  	{ .compatible = "richtek,rt1715", .data = &rt1715 },
>  	{}
> 
> -- 
> 2.53.0

-- 
heikki

      reply	other threads:[~2026-02-23 15:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-20  6:22 [PATCH v3 0/2] Add support for Etek ET7304 Controller Yuanshen Cao
2026-02-20  6:22 ` [PATCH v3 1/2] dt-bindings: usb: document the Etek ET7304 USB Type-C Port Controller Yuanshen Cao
2026-02-20  7:17   ` Krzysztof Kozlowski
2026-02-20  6:22 ` [PATCH v3 2/2] usb: typec: tcpm: Add vid and chip info for Etek ET7304 Yuanshen Cao
2026-02-23 15:09   ` Heikki Krogerus [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aZxtncdzuUejRVF3@kuha \
    --to=heikki.krogerus@linux.intel.com \
    --cc=alex.caoys@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox