* [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
` (2 more replies)
2026-02-23 6:38 ` [PATCH v3 2/9] dt-bindings: regulator: cpcap-regulator: document Mot regulator Svyatoslav Ryhel
` (8 subsequent siblings)
9 siblings, 3 replies; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
Convert devicetree bindings for the Motorola CPCAP MFD regulator subnode
from TXT to YAML format. Main functionality preserved.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../bindings/regulator/cpcap-regulator.txt | 35 --------------
.../regulator/motorola,cpcap-regulator.yaml | 46 +++++++++++++++++++
2 files changed, 46 insertions(+), 35 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
create mode 100644 Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
deleted file mode 100644
index 36f5e2f5cc0f..000000000000
--- a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Motorola CPCAP PMIC voltage regulators
-------------------------------------
-
-Requires node properties:
-- "compatible" value one of:
- "motorola,cpcap-regulator"
- "motorola,mapphone-cpcap-regulator"
- "motorola,xoom-cpcap-regulator"
-
-Required regulator properties:
-- "regulator-name"
-- "regulator-enable-ramp-delay"
-- "regulator-min-microvolt"
-- "regulator-max-microvolt"
-
-Optional regulator properties:
-- "regulator-boot-on"
-
-See Documentation/devicetree/bindings/regulator/regulator.txt
-for more details about the regulator properties.
-
-Example:
-
-cpcap_regulator: regulator {
- compatible = "motorola,cpcap-regulator";
-
- cpcap_regulators: regulators {
- sw5: SW5 {
- regulator-min-microvolt = <5050000>;
- regulator-max-microvolt = <5050000>;
- regulator-enable-ramp-delay = <50000>;
- regulator-boot-on;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml b/Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml
new file mode 100644
index 000000000000..ed28d2653a55
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/motorola,cpcap-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC regulators
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+ This module is part of the Motorola CPCAP MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml. The
+ regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+properties:
+ compatible:
+ enum:
+ - motorola,cpcap-regulator
+ - motorola,mapphone-cpcap-regulator
+ - motorola,xoom-cpcap-regulator
+
+ regulators:
+ type: object
+
+ patternProperties:
+ "^(SW[1-6]|V(CAM|CSI|DAC|DIG|FUSE|HVIO|SDIO|PLL|RF[12]|RFREF|WLAN[12]|SIM|SIMCARD|VIB|USB|AUDIO))$":
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+
+ required:
+ - regulator-name
+ - regulator-enable-ramp-delay
+ - regulator-min-microvolt
+ - regulator-max-microvolt
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+...
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema
2026-02-23 6:38 ` [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema Svyatoslav Ryhel
@ 2026-02-23 9:54 ` Rob Herring (Arm)
2026-02-23 15:50 ` Rob Herring (Arm)
2026-02-26 18:55 ` Mark Brown
2 siblings, 0 replies; 20+ messages in thread
From: Rob Herring (Arm) @ 2026-02-23 9:54 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Mark Brown, linux-kernel, David Lechner, Krzysztof Kozlowski,
Liam Girdwood, devicetree, linux-input, Conor Dooley, Lee Jones,
linux-leds, Pavel Machek, Dmitry Torokhov, Tony Lindgren
On Mon, 23 Feb 2026 08:38:50 +0200, Svyatoslav Ryhel wrote:
> Convert devicetree bindings for the Motorola CPCAP MFD regulator subnode
> from TXT to YAML format. Main functionality preserved.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../bindings/regulator/cpcap-regulator.txt | 35 --------------
> .../regulator/motorola,cpcap-regulator.yaml | 46 +++++++++++++++++++
> 2 files changed, 46 insertions(+), 35 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
Warning: Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
See https://patchwork.kernel.org/project/devicetree/patch/20260223063858.12208-2-clamor95@gmail.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema
2026-02-23 6:38 ` [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
@ 2026-02-23 15:50 ` Rob Herring (Arm)
2026-02-26 18:55 ` Mark Brown
2 siblings, 0 replies; 20+ messages in thread
From: Rob Herring (Arm) @ 2026-02-23 15:50 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: David Lechner, linux-kernel, Pavel Machek, Krzysztof Kozlowski,
Tony Lindgren, Lee Jones, linux-input, devicetree,
Dmitry Torokhov, linux-leds, Mark Brown, Liam Girdwood,
Conor Dooley
On Mon, 23 Feb 2026 08:38:50 +0200, Svyatoslav Ryhel wrote:
> Convert devicetree bindings for the Motorola CPCAP MFD regulator subnode
> from TXT to YAML format. Main functionality preserved.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../bindings/regulator/cpcap-regulator.txt | 35 --------------
> .../regulator/motorola,cpcap-regulator.yaml | 46 +++++++++++++++++++
> 2 files changed, 46 insertions(+), 35 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml
>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema
2026-02-23 6:38 ` [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
2026-02-23 15:50 ` Rob Herring (Arm)
@ 2026-02-26 18:55 ` Mark Brown
2 siblings, 0 replies; 20+ messages in thread
From: Mark Brown @ 2026-02-26 18:55 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, David Lechner,
Tony Lindgren, linux-input, devicetree, linux-kernel, linux-leds
[-- Attachment #1: Type: text/plain, Size: 529 bytes --]
On Mon, Feb 23, 2026 at 08:38:50AM +0200, Svyatoslav Ryhel wrote:
> Convert devicetree bindings for the Motorola CPCAP MFD regulator subnode
> from TXT to YAML format. Main functionality preserved.
Please submit patches using subject lines reflecting the style for the
subsystem, this makes it easier for people to identify relevant patches.
Look at what existing commits in the area you're changing are doing and
make sure your subject lines visually resemble what they're doing.
There's no need to resubmit to fix this alone.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 2/9] dt-bindings: regulator: cpcap-regulator: document Mot regulator
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 3/9] regulator: cpcap-regulator: add support for Mot regulators Svyatoslav Ryhel
` (7 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
Document regulator composition used by the CPCAP of Tegra20 Mot board,
that is a base for Atrix 4G and Droid X2.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---
.../devicetree/bindings/regulator/motorola,cpcap-regulator.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml b/Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml
index ed28d2653a55..1a44c8e61243 100644
--- a/Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml
@@ -20,6 +20,7 @@ properties:
enum:
- motorola,cpcap-regulator
- motorola,mapphone-cpcap-regulator
+ - motorola,mot-cpcap-regulator
- motorola,xoom-cpcap-regulator
regulators:
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 3/9] regulator: cpcap-regulator: add support for Mot regulators
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 2/9] dt-bindings: regulator: cpcap-regulator: document Mot regulator Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 4/9] dt-bindings: leds: leds-cpcap: convert to DT schema Svyatoslav Ryhel
` (6 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
Add support for regulator set used in Motorola Mot board, used as a base
for Atrix 4G and Droid X2 smartphones.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
drivers/regulator/cpcap-regulator.c | 105 ++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/drivers/regulator/cpcap-regulator.c b/drivers/regulator/cpcap-regulator.c
index 6958d154442b..63f5c90ddf50 100644
--- a/drivers/regulator/cpcap-regulator.c
+++ b/drivers/regulator/cpcap-regulator.c
@@ -261,6 +261,30 @@ static const struct regulator_ops cpcap_regulator_ops = {
};
static const unsigned int unknown_val_tbl[] = { 0, };
+static const unsigned int sw_mot_val_tbl[] = { 600000, 612500, 625000,
+ 637500, 650000, 662500,
+ 675000, 687500, 700000,
+ 712500, 725000, 737500,
+ 750000, 762500, 775000,
+ 787500, 800000, 812500,
+ 825000, 837500, 850000,
+ 862500, 875000, 887500,
+ 900000, 912500, 925000,
+ 937500, 950000, 962500,
+ 975000, 987500, 1000000,
+ 1012500, 1025000, 1037500,
+ 1050000, 1062500, 1075000,
+ 1087500, 1100000, 1112500,
+ 1125000, 1137500, 1150000,
+ 1162500, 1175000, 1187500,
+ 1200000, 1212500, 1225000,
+ 1237500, 1250000, 1262500,
+ 1275000, 1287500, 1300000,
+ 1312500, 1325000, 1337500,
+ 1350000, 1362500, 1375000,
+ 1387500, 1400000, 1412500,
+ 1425000, 1437500, 1450000,
+ 1462500, 1475000, };
static const unsigned int sw2_sw4_val_tbl[] = { 612500, 625000, 637500,
650000, 662500, 675000,
687500, 700000, 712500,
@@ -284,6 +308,7 @@ static const unsigned int sw2_sw4_val_tbl[] = { 612500, 625000, 637500,
1362500, 1375000, 1387500,
1400000, 1412500, 1425000,
1437500, 1450000, 1462500, };
+static const unsigned int sw3_val_tbl[] = { 1350000, 1800000, 1850000, 1875000, };
static const unsigned int sw5_val_tbl[] = { 0, 5050000, };
static const unsigned int vcam_val_tbl[] = { 2600000, 2700000, 2800000,
2900000, };
@@ -402,6 +427,82 @@ static const struct cpcap_regulator omap4_regulators[] = {
{ /* sentinel */ },
};
+static const struct cpcap_regulator mot_regulators[] = {
+ CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW1_SEL, sw_mot_val_tbl,
+ 0x6f00, 0x7f, 0x6800, 0, 0),
+ CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW2_SEL, sw_mot_val_tbl,
+ 0x6f00, 0x7f, 0x4804, 0, 0),
+ CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW3_SEL, sw3_val_tbl,
+ 0x578, 0x3, 0x043c, 0, 0),
+ CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW4_SEL, sw_mot_val_tbl,
+ 0x6f00, 0x7f, 0x4909, 0, 0),
+ CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW5_SEL, sw5_val_tbl,
+ 0x28, 0, 0x20, 0, 0),
+ CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW6_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0),
+ CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
+ 0x87, 0x30, 0x7, 0, 420),
+ CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
+ 0x47, 0x10, 0x7, 0, 350),
+ CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
+ 0x87, 0x30, 0x0, 0, 420),
+ CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
+ 0x87, 0x30, 0x0, 0, 420),
+ CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
+ 0xa0, 0xf, 0x0, 0, 420),
+ CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
+ 0x17, 0, 0x2, 0, 0),
+ CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
+ 0x87, 0x38, 0x2, 0, 420),
+ CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
+ 0x47, 0x18, 0x1, 0, 420),
+ CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
+ 0xac, 0x2, 0, 0, 10),
+ CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
+ 0x23, 0x8, 0, 0, 10),
+ CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
+ 0x23, 0x8, 0, 0, 420),
+ CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
+ 0x47, 0x10, 0x5, 0, 420),
+ CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
+ 0x20c, 0xc0, 0xd, 0, 420),
+ CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+ 0xffff, vsim_val_tbl,
+ 0x23, 0x8, 0, 0, 420),
+ CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+ 0xffff, vsimcard_val_tbl,
+ 0x1e80, 0x8, 0x1e00, 0, 420),
+ CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
+ 0x1, 0xc, 0x1, 0, 500),
+ CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
+ 0x11c, 0x40, 0xc, 0, 0),
+ CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
+ CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
+ 0x16, 0x1, 0x5, 0, 0),
+ { /* sentinel */ }
+};
+
static const struct cpcap_regulator xoom_regulators[] = {
CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW1_SEL, unknown_val_tbl,
@@ -486,6 +587,10 @@ static const struct of_device_id cpcap_regulator_id_table[] = {
.compatible = "motorola,mapphone-cpcap-regulator",
.data = omap4_regulators,
},
+ {
+ .compatible = "motorola,mot-cpcap-regulator",
+ .data = mot_regulators,
+ },
{
.compatible = "motorola,xoom-cpcap-regulator",
.data = xoom_regulators,
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 4/9] dt-bindings: leds: leds-cpcap: convert to DT schema
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
` (2 preceding siblings ...)
2026-02-23 6:38 ` [PATCH v3 3/9] regulator: cpcap-regulator: add support for Mot regulators Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
2026-02-23 6:38 ` [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: " Svyatoslav Ryhel
` (5 subsequent siblings)
9 siblings, 1 reply; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
Convert LEDs devicetree bindings for the Motorola CPCAP MFD from TXT to
YAML format. This patch does not change any functionality; the bindings
remain the same.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
.../devicetree/bindings/leds/leds-cpcap.txt | 29 -------------
.../bindings/leds/motorola,cpcap-leds.yaml | 42 +++++++++++++++++++
2 files changed, 42 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-cpcap.txt
create mode 100644 Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-cpcap.txt b/Documentation/devicetree/bindings/leds/leds-cpcap.txt
deleted file mode 100644
index ebf7cdc7f70c..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-cpcap.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Motorola CPCAP PMIC LEDs
-------------------------
-
-This module is part of the CPCAP. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
-
-Requires node properties:
-- compatible: should be one of
- * "motorola,cpcap-led-mdl" (Main Display Lighting)
- * "motorola,cpcap-led-kl" (Keyboard Lighting)
- * "motorola,cpcap-led-adl" (Aux Display Lighting)
- * "motorola,cpcap-led-red" (Red Triode)
- * "motorola,cpcap-led-green" (Green Triode)
- * "motorola,cpcap-led-blue" (Blue Triode)
- * "motorola,cpcap-led-cf" (Camera Flash)
- * "motorola,cpcap-led-bt" (Bluetooth)
- * "motorola,cpcap-led-cp" (Camera Privacy LED)
-- label: see Documentation/devicetree/bindings/leds/common.txt
-- vdd-supply: A phandle to the regulator powering the LED
-
-Example:
-
-&cpcap {
- cpcap_led_red: red-led {
- compatible = "motorola,cpcap-led-red";
- label = "cpcap:red";
- vdd-supply = <&sw5>;
- };
-};
diff --git a/Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml b/Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml
new file mode 100644
index 000000000000..c8e7b88a05cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/motorola,cpcap-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC LEDs
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+ This module is part of the Motorola CPCAP MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml. LEDs are
+ represented as sub-nodes of the PMIC node on the device tree.
+
+allOf:
+ - $ref: /schemas/leds/common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - motorola,cpcap-led-adl # Display Lighting
+ - motorola,cpcap-led-blue # Blue Triode
+ - motorola,cpcap-led-bt # Bluetooth
+ - motorola,cpcap-led-cf # Camera Flash
+ - motorola,cpcap-led-cp # Camera Privacy LED
+ - motorola,cpcap-led-green # Green Triode
+ - motorola,cpcap-led-kl # Keyboard Lighting
+ - motorola,cpcap-led-mdl # Main Display Lighting
+ - motorola,cpcap-led-red # Red Triode
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - label
+ - vdd-supply
+
+unevaluatedProperties: false
+
+...
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 4/9] dt-bindings: leds: leds-cpcap: convert to DT schema
2026-02-23 6:38 ` [PATCH v3 4/9] dt-bindings: leds: leds-cpcap: convert to DT schema Svyatoslav Ryhel
@ 2026-02-23 9:54 ` Rob Herring (Arm)
0 siblings, 0 replies; 20+ messages in thread
From: Rob Herring (Arm) @ 2026-02-23 9:54 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: devicetree, linux-input, Tony Lindgren, linux-kernel,
Pavel Machek, Conor Dooley, linux-leds, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Lee Jones, David Lechner,
Dmitry Torokhov
On Mon, 23 Feb 2026 08:38:53 +0200, Svyatoslav Ryhel wrote:
> Convert LEDs devicetree bindings for the Motorola CPCAP MFD from TXT to
> YAML format. This patch does not change any functionality; the bindings
> remain the same.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> ---
> .../devicetree/bindings/leds/leds-cpcap.txt | 29 -------------
> .../bindings/leds/motorola,cpcap-leds.yaml | 42 +++++++++++++++++++
> 2 files changed, 42 insertions(+), 29 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/leds/leds-cpcap.txt
> create mode 100644 Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/leds/leds-cpcap.txt
Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/leds/leds-cpcap.txt
See https://patchwork.kernel.org/project/devicetree/patch/20260223063858.12208-5-clamor95@gmail.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: convert to DT schema
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
` (3 preceding siblings ...)
2026-02-23 6:38 ` [PATCH v3 4/9] dt-bindings: leds: leds-cpcap: convert to DT schema Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
2026-02-23 16:46 ` Rob Herring (Arm)
2026-02-23 6:38 ` [PATCH v3 6/9] dt-bindings: mfd: motorola-cpcap: " Svyatoslav Ryhel
` (4 subsequent siblings)
9 siblings, 2 replies; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
Convert power button devicetree bindings for the Motorola CPCAP MFD from
TXT to YAML format. This patch does not change any functionality; the
bindings remain the same.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../bindings/input/cpcap-pwrbutton.txt | 20 ------------
.../input/motorola,cpcap-pwrbutton.yaml | 32 +++++++++++++++++++
2 files changed, 32 insertions(+), 20 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
create mode 100644 Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml
diff --git a/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt b/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
deleted file mode 100644
index 0dd0076daf71..000000000000
--- a/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Motorola CPCAP on key
-
-This module is part of the CPCAP. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
- - "motorola,cpcap-pwrbutton"
-- interrupts: irq specifier for CPCAP's ON IRQ
-
-Example:
-
-&cpcap {
- cpcap_pwrbutton: pwrbutton {
- compatible = "motorola,cpcap-pwrbutton";
- interrupts = <23 IRQ_TYPE_NONE>;
- };
-};
diff --git a/Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml b/Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml
new file mode 100644
index 000000000000..77a3e5a47d1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/motorola,cpcap-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC power key
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+ This module is part of the Motorola CPCAP MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml. The
+ power key is represented as a sub-node of the PMIC node on the device
+ tree.
+
+properties:
+ compatible:
+ const: motorola,cpcap-pwrbutton
+
+ interrupts:
+ items:
+ - description: CPCAP's ON interrupt
+
+required:
+ - compatible
+ - interrupts
+
+additionalProperties: false
+
+...
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: convert to DT schema
2026-02-23 6:38 ` [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: " Svyatoslav Ryhel
@ 2026-02-23 9:54 ` Rob Herring (Arm)
2026-02-23 16:46 ` Rob Herring (Arm)
1 sibling, 0 replies; 20+ messages in thread
From: Rob Herring (Arm) @ 2026-02-23 9:54 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Tony Lindgren, Dmitry Torokhov, devicetree, linux-kernel,
David Lechner, Conor Dooley, Pavel Machek, Mark Brown, linux-leds,
Liam Girdwood, Lee Jones, Krzysztof Kozlowski, linux-input
On Mon, 23 Feb 2026 08:38:54 +0200, Svyatoslav Ryhel wrote:
> Convert power button devicetree bindings for the Motorola CPCAP MFD from
> TXT to YAML format. This patch does not change any functionality; the
> bindings remain the same.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../bindings/input/cpcap-pwrbutton.txt | 20 ------------
> .../input/motorola,cpcap-pwrbutton.yaml | 32 +++++++++++++++++++
> 2 files changed, 32 insertions(+), 20 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
> create mode 100644 Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
See https://patchwork.kernel.org/project/devicetree/patch/20260223063858.12208-6-clamor95@gmail.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: convert to DT schema
2026-02-23 6:38 ` [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: " Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
@ 2026-02-23 16:46 ` Rob Herring (Arm)
2026-02-23 22:02 ` Dmitry Torokhov
1 sibling, 1 reply; 20+ messages in thread
From: Rob Herring (Arm) @ 2026-02-23 16:46 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Pavel Machek, Conor Dooley, Dmitry Torokhov, devicetree,
David Lechner, linux-input, Krzysztof Kozlowski, Lee Jones,
Mark Brown, Tony Lindgren, linux-kernel, Liam Girdwood,
linux-leds
On Mon, 23 Feb 2026 08:38:54 +0200, Svyatoslav Ryhel wrote:
> Convert power button devicetree bindings for the Motorola CPCAP MFD from
> TXT to YAML format. This patch does not change any functionality; the
> bindings remain the same.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../bindings/input/cpcap-pwrbutton.txt | 20 ------------
> .../input/motorola,cpcap-pwrbutton.yaml | 32 +++++++++++++++++++
> 2 files changed, 32 insertions(+), 20 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
> create mode 100644 Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml
>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: convert to DT schema
2026-02-23 16:46 ` Rob Herring (Arm)
@ 2026-02-23 22:02 ` Dmitry Torokhov
0 siblings, 0 replies; 20+ messages in thread
From: Dmitry Torokhov @ 2026-02-23 22:02 UTC (permalink / raw)
To: Rob Herring (Arm)
Cc: Svyatoslav Ryhel, Pavel Machek, Conor Dooley, devicetree,
David Lechner, linux-input, Krzysztof Kozlowski, Lee Jones,
Mark Brown, Tony Lindgren, linux-kernel, Liam Girdwood,
linux-leds
On Mon, Feb 23, 2026 at 10:46:54AM -0600, Rob Herring (Arm) wrote:
>
> On Mon, 23 Feb 2026 08:38:54 +0200, Svyatoslav Ryhel wrote:
> > Convert power button devicetree bindings for the Motorola CPCAP MFD from
> > TXT to YAML format. This patch does not change any functionality; the
> > bindings remain the same.
> >
> > Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > ---
> > .../bindings/input/cpcap-pwrbutton.txt | 20 ------------
> > .../input/motorola,cpcap-pwrbutton.yaml | 32 +++++++++++++++++++
> > 2 files changed, 32 insertions(+), 20 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
> > create mode 100644 Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml
> >
>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Please merge with the rest of the series.
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 6/9] dt-bindings: mfd: motorola-cpcap: convert to DT schema
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
` (4 preceding siblings ...)
2026-02-23 6:38 ` [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: " Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-03-05 23:57 ` Rob Herring (Arm)
2026-02-23 6:38 ` [PATCH v3 7/9] dt-bindings: mfd: motorola-cpcap: document Mapphone and Mot CPCAP Svyatoslav Ryhel
` (3 subsequent siblings)
9 siblings, 1 reply; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
Convert devicetree bindings for the Motorola CPCAP MFD from TXT to YAML.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../bindings/mfd/motorola,cpcap.yaml | 411 ++++++++++++++++++
.../bindings/mfd/motorola-cpcap.txt | 78 ----
2 files changed, 411 insertions(+), 78 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
diff --git a/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml b/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
new file mode 100644
index 000000000000..eea5b2efa80c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
@@ -0,0 +1,411 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/motorola,cpcap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC MFD
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: motorola,cpcap
+ - const: st,6556002
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ spi-max-frequency:
+ maximum: 9600000
+
+ spi-cs-high: true
+ spi-cpol: true
+ spi-cpha: true
+
+ adc:
+ $ref: /schemas/iio/adc/motorola,cpcap-adc.yaml
+
+ audio-codec:
+ type: object
+ additionalProperties: false
+
+ properties:
+ interrupts:
+ items:
+ - description: headset detect interrupt
+ - description: microphone bias 2 detect interrupt
+
+ interrupt-names:
+ items:
+ - const: hs
+ - const: mb2
+
+ "#sound-dai-cells":
+ const: 1
+
+ VAUDIO-supply:
+ description:
+ Codec power supply, usually VAUDIO regulator of CPCAP.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: port connected to the Stereo HiFi DAC
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: port connected to the Voice DAC
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - interrupts
+ - interrupt-names
+ - "#sound-dai-cells"
+
+ battery:
+ $ref: /schemas/power/supply/cpcap-battery.yaml
+
+ charger:
+ $ref: /schemas/power/supply/cpcap-charger.yaml
+
+ key-power:
+ $ref: /schemas/input/motorola,cpcap-pwrbutton.yaml
+
+ phy:
+ $ref: /schemas/phy/motorola,cpcap-usb-phy.yaml
+
+ regulator:
+ $ref: /schemas/regulator/motorola,cpcap-regulator.yaml
+
+ rtc:
+ $ref: /schemas/rtc/motorola,cpcap-rtc.yaml
+
+patternProperties:
+ "^led(-[a-z]+)?$":
+ $ref: /schemas/leds/motorola,cpcap-leds.yaml
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/linux-event-codes.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpcap: pmic@0 {
+ compatible = "motorola,cpcap", "st,6556002";
+ reg = <0>; /* cs0 */
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi-max-frequency = <3000000>;
+ spi-cs-high;
+
+ spi-cpol;
+ spi-cpha;
+
+ cpcap_adc: adc {
+ compatible = "motorola,cpcap-adc";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <8 IRQ_TYPE_NONE>;
+ interrupt-names = "adcdone";
+
+ #io-channel-cells = <1>;
+ };
+
+ cpcap_audio: audio-codec {
+ interrupt-parent = <&cpcap>;
+ interrupts = <9 IRQ_TYPE_NONE>, <10 IRQ_TYPE_NONE>;
+ interrupt-names = "hs", "mb2";
+
+ VAUDIO-supply = <&vdd_audio>;
+
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* HiFi */
+ port@0 {
+ reg = <0>;
+
+ cpcap_audio_codec0: endpoint {
+ };
+ };
+
+ /* Voice */
+ port@1 {
+ reg = <1>;
+
+ cpcap_audio_codec1: endpoint {
+ };
+ };
+ };
+ };
+
+ cpcap_battery: battery {
+ compatible = "motorola,cpcap-battery";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <6 IRQ_TYPE_NONE>, <5 IRQ_TYPE_NONE>,
+ <3 IRQ_TYPE_NONE>, <20 IRQ_TYPE_NONE>,
+ <54 IRQ_TYPE_NONE>, <57 IRQ_TYPE_NONE>;
+ interrupt-names = "eol", "lowbph", "lowbpl",
+ "chrgcurr1", "battdetb", "cccal";
+
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 5>, <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "chg_isense", "batti";
+ power-supplies = <&cpcap_charger>;
+ };
+
+ cpcap_charger: charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <13 IRQ_TYPE_NONE>, <12 IRQ_TYPE_NONE>,
+ <29 IRQ_TYPE_NONE>, <28 IRQ_TYPE_NONE>,
+ <22 IRQ_TYPE_NONE>, <21 IRQ_TYPE_NONE>,
+ <20 IRQ_TYPE_NONE>, <19 IRQ_TYPE_NONE>,
+ <54 IRQ_TYPE_NONE>;
+ interrupt-names = "chrg_det", "rvrs_chrg", "chrg_se1b",
+ "se0conn", "rvrs_mode", "chrgcurr2",
+ "chrgcurr1", "vbusvld", "battdetb";
+
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+ <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 2>, <&cpcap_adc 5>,
+ <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+ };
+
+ key-power {
+ compatible = "motorola,cpcap-pwrbutton";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <23 IRQ_TYPE_NONE>;
+ };
+
+ led-red {
+ compatible = "motorola,cpcap-led-red";
+ vdd-supply = <&vdd_led>;
+ label = "status-led::red";
+ };
+
+ led-green {
+ compatible = "motorola,cpcap-led-green";
+ vdd-supply = <&vdd_led>;
+ label = "status-led::green";
+ };
+
+ led-blue {
+ compatible = "motorola,cpcap-led-blue";
+ vdd-supply = <&vdd_led>;
+ label = "status-led::blue";
+ };
+
+ cpcap_usb2_phy: phy {
+ compatible = "motorola,cpcap-usb-phy";
+
+ pinctrl-0 = <&usb_gpio_mux_sel1>, <&usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ #phy-cells = <0>;
+
+ interrupts-extended =
+ <&cpcap 15 IRQ_TYPE_NONE>, <&cpcap 14 IRQ_TYPE_NONE>,
+ <&cpcap 28 IRQ_TYPE_NONE>, <&cpcap 19 IRQ_TYPE_NONE>,
+ <&cpcap 18 IRQ_TYPE_NONE>, <&cpcap 17 IRQ_TYPE_NONE>,
+ <&cpcap 16 IRQ_TYPE_NONE>, <&cpcap 49 IRQ_TYPE_NONE>,
+ <&cpcap 48 IRQ_TYPE_NONE>;
+ interrupt-names = "id_ground", "id_float", "se0conn",
+ "vbusvld", "sessvld", "sessend",
+ "se1", "dm", "dp";
+
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,
+ <&gpio1 0 GPIO_ACTIVE_HIGH>;
+
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+
+ vusb-supply = <&avdd_usb>;
+ };
+
+ regulator {
+ compatible = "motorola,cpcap-regulator";
+
+ regulators {
+ vdd_cpu: SW1 {
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-enable-ramp-delay = <1500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_core: SW2 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-enable-ramp-delay = <1500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8_vio: SW3 {
+ regulator-name = "vdd_1v8_vio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_aon: SW4 {
+ regulator-name = "vdd_aon";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-enable-ramp-delay = <1500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_led: SW5 {
+ regulator-name = "vdd_led";
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ regulator-enable-ramp-delay = <1500>;
+ regulator-boot-on;
+ };
+
+ vdd_hvio: VHVIO {
+ regulator-name = "vdd_hvio";
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vcore_emmc: VSDIO {
+ regulator-name = "vcore_emmc";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ avdd_dsi_csi: VCSI {
+ regulator-name = "avdd_dsi_csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-boot-on;
+ };
+
+ avdd_3v3_periph: VWLAN2 {
+ regulator-name = "avdd_3v3_periph";
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-boot-on;
+ };
+
+ vddio_usd: VSIMCARD {
+ regulator-name = "vddio_usd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-boot-on;
+ };
+
+ vdd_haptic: VVIB {
+ regulator-name = "vdd_haptic";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ avdd_usb: VUSB {
+ regulator-name = "avdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_audio: VAUDIO {
+ regulator-name = "vdd_audio";
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ cpcap_rtc: rtc {
+ compatible = "motorola,cpcap-rtc";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
deleted file mode 100644
index 18c3fc26ca93..000000000000
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Motorola CPCAP PMIC device tree binding
-
-Required properties:
-- compatible : One or both of "motorola,cpcap" or "ste,6556002"
-- reg : SPI chip select
-- interrupts : The interrupt line the device is connected to
-- interrupt-controller : Marks the device node as an interrupt controller
-- #interrupt-cells : The number of cells to describe an IRQ, should be 2
-- #address-cells : Child device offset number of cells, should be 1
-- #size-cells : Child device size number of cells, should be 0
-- spi-max-frequency : Typically set to 3000000
-- spi-cs-high : SPI chip select direction
-
-Optional subnodes:
-
-The sub-functions of CPCAP get their own node with their own compatible values,
-which are described in the following files:
-
-- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
-- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
-- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
-- Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
-- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
-- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
-- Documentation/devicetree/bindings/leds/leds-cpcap.txt
-- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
-
-The only exception is the audio codec. Instead of a compatible value its
-node must be named "audio-codec".
-
-Required properties for the audio-codec subnode:
-
-- #sound-dai-cells = <1>;
-- interrupts : should contain jack detection interrupts, with headset
- detect interrupt matching "hs" and microphone bias 2
- detect interrupt matching "mb2" in interrupt-names.
-- interrupt-names : Contains "hs", "mb2"
-
-The audio-codec provides two DAIs. The first one is connected to the
-Stereo HiFi DAC and the second one is connected to the Voice DAC.
-
-Example:
-
-&mcspi1 {
- cpcap: pmic@0 {
- compatible = "motorola,cpcap", "ste,6556002";
- reg = <0>; /* cs0 */
- interrupt-parent = <&gpio1>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <3000000>;
- spi-cs-high;
-
- audio-codec {
- #sound-dai-cells = <1>;
- interrupts-extended = <&cpcap 9 0>, <&cpcap 10 0>;
- interrupt-names = "hs", "mb2";
-
- /* HiFi */
- port@0 {
- endpoint {
- remote-endpoint = <&cpu_dai1>;
- };
- };
-
- /* Voice */
- port@1 {
- endpoint {
- remote-endpoint = <&cpu_dai2>;
- };
- };
- };
- };
-};
-
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 6/9] dt-bindings: mfd: motorola-cpcap: convert to DT schema
2026-02-23 6:38 ` [PATCH v3 6/9] dt-bindings: mfd: motorola-cpcap: " Svyatoslav Ryhel
@ 2026-03-05 23:57 ` Rob Herring (Arm)
0 siblings, 0 replies; 20+ messages in thread
From: Rob Herring (Arm) @ 2026-03-05 23:57 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: David Lechner, Liam Girdwood, Dmitry Torokhov, devicetree,
Pavel Machek, Conor Dooley, Lee Jones, linux-input,
Krzysztof Kozlowski, Mark Brown, linux-leds, linux-kernel,
Tony Lindgren
On Mon, 23 Feb 2026 08:38:55 +0200, Svyatoslav Ryhel wrote:
> Convert devicetree bindings for the Motorola CPCAP MFD from TXT to YAML.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../bindings/mfd/motorola,cpcap.yaml | 411 ++++++++++++++++++
> .../bindings/mfd/motorola-cpcap.txt | 78 ----
> 2 files changed, 411 insertions(+), 78 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
> delete mode 100644 Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 7/9] dt-bindings: mfd: motorola-cpcap: document Mapphone and Mot CPCAP
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
` (5 preceding siblings ...)
2026-02-23 6:38 ` [PATCH v3 6/9] dt-bindings: mfd: motorola-cpcap: " Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-03-05 23:58 ` Rob Herring (Arm)
2026-02-23 6:38 ` [PATCH v3 8/9] mfd: motorola-cpcap: diverge configuration per-board Svyatoslav Ryhel
` (2 subsequent siblings)
9 siblings, 1 reply; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
Add compatibles for Mapphone and Mot CPCAP subdevice compositions. Both
variations cannot use st,6556002 fallback since they may be based on
different controllers.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../devicetree/bindings/mfd/motorola,cpcap.yaml | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml b/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
index eea5b2efa80c..487e5456864b 100644
--- a/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
+++ b/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
@@ -14,9 +14,14 @@ allOf:
properties:
compatible:
- items:
- - const: motorola,cpcap
- - const: st,6556002
+ oneOf:
+ - enum:
+ - motorola,mapphone-cpcap
+ - motorola,mot-cpcap
+
+ - items:
+ - const: motorola,cpcap
+ - const: st,6556002
reg:
maxItems: 1
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 7/9] dt-bindings: mfd: motorola-cpcap: document Mapphone and Mot CPCAP
2026-02-23 6:38 ` [PATCH v3 7/9] dt-bindings: mfd: motorola-cpcap: document Mapphone and Mot CPCAP Svyatoslav Ryhel
@ 2026-03-05 23:58 ` Rob Herring (Arm)
0 siblings, 0 replies; 20+ messages in thread
From: Rob Herring (Arm) @ 2026-03-05 23:58 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Liam Girdwood, Conor Dooley, Pavel Machek, David Lechner,
linux-leds, Tony Lindgren, linux-input, Mark Brown, Lee Jones,
Dmitry Torokhov, linux-kernel, Krzysztof Kozlowski, devicetree
On Mon, 23 Feb 2026 08:38:56 +0200, Svyatoslav Ryhel wrote:
> Add compatibles for Mapphone and Mot CPCAP subdevice compositions. Both
> variations cannot use st,6556002 fallback since they may be based on
> different controllers.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../devicetree/bindings/mfd/motorola,cpcap.yaml | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 8/9] mfd: motorola-cpcap: diverge configuration per-board
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
` (6 preceding siblings ...)
2026-02-23 6:38 ` [PATCH v3 7/9] dt-bindings: mfd: motorola-cpcap: document Mapphone and Mot CPCAP Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 9/9] mfd: motorola-cpcap: add support for Mot CPCAP composition Svyatoslav Ryhel
2026-02-26 22:13 ` (subset) [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Mark Brown
9 siblings, 0 replies; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
MFD have rigid subdevice structure which does not allow flexible dynamic
subdevice linking. Address this by diverging CPCAP subdevice composition
to take into account board specific configuration.
Create a common default subdevice composition, rename existing subdevice
composition into cpcap_mapphone_mfd_devices since it targets mainly
Mapphone board.
Removed st,6556002 as it is no longer applicable to all cases and
duplicates motorola,cpcap, which is used as the default composition.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
drivers/mfd/motorola-cpcap.c | 101 ++++++++++++++++++++++++++++-------
1 file changed, 83 insertions(+), 18 deletions(-)
diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c
index d8243b956f87..516d1e33affa 100644
--- a/drivers/mfd/motorola-cpcap.c
+++ b/drivers/mfd/motorola-cpcap.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/sysfs.h>
@@ -24,10 +25,16 @@
#define CPCAP_REGISTER_SIZE 4
#define CPCAP_REGISTER_BITS 16
+struct cpcap_chip_data {
+ const struct mfd_cell *mfd_devices;
+ unsigned int num_devices;
+};
+
struct cpcap_ddata {
struct spi_device *spi;
struct regmap_irq *irqs;
struct regmap_irq_chip_data *irqdata[CPCAP_NR_IRQ_CHIPS];
+ const struct cpcap_chip_data *cdata;
const struct regmap_config *regmap_conf;
struct regmap *regmap;
};
@@ -195,20 +202,6 @@ static int cpcap_init_irq(struct cpcap_ddata *cpcap)
return 0;
}
-static const struct of_device_id cpcap_of_match[] = {
- { .compatible = "motorola,cpcap", },
- { .compatible = "st,6556002", },
- {},
-};
-MODULE_DEVICE_TABLE(of, cpcap_of_match);
-
-static const struct spi_device_id cpcap_spi_ids[] = {
- { .name = "cpcap", },
- { .name = "6556002", },
- {},
-};
-MODULE_DEVICE_TABLE(spi, cpcap_spi_ids);
-
static const struct regmap_config cpcap_regmap_config = {
.reg_bits = 16,
.reg_stride = 4,
@@ -241,7 +234,56 @@ static int cpcap_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(cpcap_pm, cpcap_suspend, cpcap_resume);
-static const struct mfd_cell cpcap_mfd_devices[] = {
+static const struct mfd_cell cpcap_default_mfd_devices[] = {
+ {
+ .name = "cpcap_adc",
+ .of_compatible = "motorola,cpcap-adc",
+ }, {
+ .name = "cpcap_battery",
+ .of_compatible = "motorola,cpcap-battery",
+ }, {
+ .name = "cpcap-regulator",
+ .of_compatible = "motorola,cpcap-regulator",
+ }, {
+ .name = "cpcap-rtc",
+ .of_compatible = "motorola,cpcap-rtc",
+ }, {
+ .name = "cpcap-pwrbutton",
+ .of_compatible = "motorola,cpcap-pwrbutton",
+ }, {
+ .name = "cpcap-usb-phy",
+ .of_compatible = "motorola,cpcap-usb-phy",
+ }, {
+ .name = "cpcap-led",
+ .id = 0,
+ .of_compatible = "motorola,cpcap-led-red",
+ }, {
+ .name = "cpcap-led",
+ .id = 1,
+ .of_compatible = "motorola,cpcap-led-green",
+ }, {
+ .name = "cpcap-led",
+ .id = 2,
+ .of_compatible = "motorola,cpcap-led-blue",
+ }, {
+ .name = "cpcap-led",
+ .id = 3,
+ .of_compatible = "motorola,cpcap-led-adl",
+ }, {
+ .name = "cpcap-led",
+ .id = 4,
+ .of_compatible = "motorola,cpcap-led-cp",
+ }, {
+ .name = "cpcap-codec",
+ },
+};
+
+static const struct cpcap_chip_data cpcap_default_data = {
+ .mfd_devices = cpcap_default_mfd_devices,
+ .num_devices = ARRAY_SIZE(cpcap_default_mfd_devices),
+};
+
+static const struct mfd_cell cpcap_mapphone_mfd_devices[] = {
{
.name = "cpcap_adc",
.of_compatible = "motorola,mapphone-cpcap-adc",
@@ -285,7 +327,12 @@ static const struct mfd_cell cpcap_mfd_devices[] = {
.of_compatible = "motorola,cpcap-led-cp",
}, {
.name = "cpcap-codec",
- }
+ },
+};
+
+static const struct cpcap_chip_data cpcap_mapphone_data = {
+ .mfd_devices = cpcap_mapphone_mfd_devices,
+ .num_devices = ARRAY_SIZE(cpcap_mapphone_mfd_devices),
};
static int cpcap_probe(struct spi_device *spi)
@@ -297,6 +344,10 @@ static int cpcap_probe(struct spi_device *spi)
if (!cpcap)
return -ENOMEM;
+ cpcap->cdata = device_get_match_data(&spi->dev);
+ if (!cpcap->cdata)
+ return -ENODEV;
+
cpcap->spi = spi;
spi_set_drvdata(spi, cpcap);
@@ -331,10 +382,24 @@ static int cpcap_probe(struct spi_device *spi)
spi->dev.coherent_dma_mask = 0;
spi->dev.dma_mask = &spi->dev.coherent_dma_mask;
- return devm_mfd_add_devices(&spi->dev, 0, cpcap_mfd_devices,
- ARRAY_SIZE(cpcap_mfd_devices), NULL, 0, NULL);
+ return devm_mfd_add_devices(&spi->dev, 0, cpcap->cdata->mfd_devices,
+ cpcap->cdata->num_devices, NULL, 0, NULL);
}
+static const struct of_device_id cpcap_of_match[] = {
+ { .compatible = "motorola,cpcap", .data = &cpcap_default_data },
+ { .compatible = "motorola,mapphone-cpcap", .data = &cpcap_mapphone_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cpcap_of_match);
+
+static const struct spi_device_id cpcap_spi_ids[] = {
+ { .name = "cpcap", .driver_data = (kernel_ulong_t)&cpcap_default_data },
+ { .name = "mapphone-cpcap", .driver_data = (kernel_ulong_t)&cpcap_mapphone_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, cpcap_spi_ids);
+
static struct spi_driver cpcap_driver = {
.driver = {
.name = "cpcap-core",
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 9/9] mfd: motorola-cpcap: add support for Mot CPCAP composition
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
` (7 preceding siblings ...)
2026-02-23 6:38 ` [PATCH v3 8/9] mfd: motorola-cpcap: diverge configuration per-board Svyatoslav Ryhel
@ 2026-02-23 6:38 ` Svyatoslav Ryhel
2026-02-26 22:13 ` (subset) [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Mark Brown
9 siblings, 0 replies; 20+ messages in thread
From: Svyatoslav Ryhel @ 2026-02-23 6:38 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Svyatoslav Ryhel, David Lechner, Tony Lindgren
Cc: linux-input, devicetree, linux-kernel, linux-leds
Add a MFD subdevice composition used in Tegra20 based Mot board
(Motorola Atrix 4G and Droid X2).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
drivers/mfd/motorola-cpcap.c | 50 ++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c
index 516d1e33affa..fdec92f5c6b0 100644
--- a/drivers/mfd/motorola-cpcap.c
+++ b/drivers/mfd/motorola-cpcap.c
@@ -335,6 +335,54 @@ static const struct cpcap_chip_data cpcap_mapphone_data = {
.num_devices = ARRAY_SIZE(cpcap_mapphone_mfd_devices),
};
+/*
+ * The Mot board features a USB-PHY and charger similar to the ones in
+ * Mapphone; however, because Mot is based on Tegra20, it is incompatible
+ * with the existing implementation, which is tightly interconnected with
+ * the OMAP USB PHY.
+ */
+static const struct mfd_cell cpcap_mot_mfd_devices[] = {
+ {
+ .name = "cpcap_adc",
+ .of_compatible = "motorola,mot-cpcap-adc",
+ }, {
+ .name = "cpcap_battery",
+ .of_compatible = "motorola,cpcap-battery",
+ }, {
+ .name = "cpcap-regulator",
+ .of_compatible = "motorola,mot-cpcap-regulator",
+ }, {
+ .name = "cpcap-rtc",
+ .of_compatible = "motorola,cpcap-rtc",
+ }, {
+ .name = "cpcap-pwrbutton",
+ .of_compatible = "motorola,cpcap-pwrbutton",
+ }, {
+ .name = "cpcap-led",
+ .id = 0,
+ .of_compatible = "motorola,cpcap-led-red",
+ }, {
+ .name = "cpcap-led",
+ .id = 1,
+ .of_compatible = "motorola,cpcap-led-green",
+ }, {
+ .name = "cpcap-led",
+ .id = 2,
+ .of_compatible = "motorola,cpcap-led-blue",
+ }, {
+ .name = "cpcap-led",
+ .id = 3,
+ .of_compatible = "motorola,cpcap-led-adl",
+ }, {
+ .name = "cpcap-codec",
+ },
+};
+
+static const struct cpcap_chip_data cpcap_mot_data = {
+ .mfd_devices = cpcap_mot_mfd_devices,
+ .num_devices = ARRAY_SIZE(cpcap_mot_mfd_devices),
+};
+
static int cpcap_probe(struct spi_device *spi)
{
struct cpcap_ddata *cpcap;
@@ -389,6 +437,7 @@ static int cpcap_probe(struct spi_device *spi)
static const struct of_device_id cpcap_of_match[] = {
{ .compatible = "motorola,cpcap", .data = &cpcap_default_data },
{ .compatible = "motorola,mapphone-cpcap", .data = &cpcap_mapphone_data },
+ { .compatible = "motorola,mot-cpcap", .data = &cpcap_mot_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, cpcap_of_match);
@@ -396,6 +445,7 @@ MODULE_DEVICE_TABLE(of, cpcap_of_match);
static const struct spi_device_id cpcap_spi_ids[] = {
{ .name = "cpcap", .driver_data = (kernel_ulong_t)&cpcap_default_data },
{ .name = "mapphone-cpcap", .driver_data = (kernel_ulong_t)&cpcap_mapphone_data },
+ { .name = "mot-cpcap", .driver_data = (kernel_ulong_t)&cpcap_mot_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, cpcap_spi_ids);
--
2.51.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: (subset) [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
` (8 preceding siblings ...)
2026-02-23 6:38 ` [PATCH v3 9/9] mfd: motorola-cpcap: add support for Mot CPCAP composition Svyatoslav Ryhel
@ 2026-02-26 22:13 ` Mark Brown
9 siblings, 0 replies; 20+ messages in thread
From: Mark Brown @ 2026-02-26 22:13 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Lee Jones, Pavel Machek, Liam Girdwood, David Lechner,
Tony Lindgren, Svyatoslav Ryhel
Cc: linux-input, devicetree, linux-kernel, linux-leds
On Mon, 23 Feb 2026 08:38:49 +0200, Svyatoslav Ryhel wrote:
> The initial goal was only to add support for the CPCAP used in the Mot
> Tegra20 board; however, since the documentation was already partially
> converted, I decided to complete the conversion to schema too.
>
> The CPCAP regulator, leds, rtc, pwrbutton and core files were converted
> from TXT to YAML while preserving the original structure. Mot board
> compatibility was added to the regulator and core schema. Since these
> were one-line patches, they were not separated into dedicated commits;
> however, the commit message notes this for both cases.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema
commit: 5a8ffc5dca9c096fe9c8879fa3a2faff723fbb8a
[2/9] dt-bindings: regulator: cpcap-regulator: document Mot regulator
commit: 0e5646030212856a7f022387a647694ba65e75a7
[3/9] regulator: cpcap-regulator: add support for Mot regulators
commit: d90c0f78379454d51a428e312ac6db573060185c
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 20+ messages in thread