Re: [PATCH v7 3/5] i2c: davinci: calculate bus freq from Hz instead of kHz

[Marcus Folkesson <marcus.folkesson@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1044 bytes --]

Hi Andy,

On Mon, Feb 23, 2026 at 04:59:49PM +0200, Andy Shevchenko wrote:
> On Mon, Feb 23, 2026 at 03:33:52PM +0100, Marcus Folkesson wrote:
> > The bus frequency is unnecessarily converted between Hz and kHz in
> > several places.
> > This is probably an old legacy from the old times (pre-devicetrees)
> > when the davinci_i2c_platform_data took the bus_freq in kHz.
> > 
> > Stick to Hz.
> 
> ...
> 
> > -	clk = ((input_clock / (psc + 1)) / (dev->bus_freq * 1000));
> > +	clk = ((input_clock / (psc + 1)) / (dev->bus_freq_hz));
> 
> Two pairs too many parentheses!
> 
> 	clk = (input_clock / (psc + 1)) / dev->bus_freq_hz;
> 
> ...
> 
> > +	dev_dbg(dev->dev, "bus_freq_hz = %dHz\n", dev->bus_freq_hz);
> 
> %u ?


Thank you for your comments, both this and the other.

This driver has a a few  other style & formatting issues, would you prefer
to fix those in a separate patch in this patchset or in a following one?

> 
> -- 
> With Best Regards,
> Andy Shevchenko
> 
> 

Thanks,
Marcus Folkesson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]