From: Yeoreum Yun <yeoreum.yun@arm.com>
To: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kvmarm@lists.linux.dev,
kvm@vger.kernel.org, linux-kselftest@vger.kernel.org,
catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
oupton@kernel.org, miko.lenczewski@arm.com,
kevin.brodsky@arm.com, broonie@kernel.org, ardb@kernel.org,
lpieralisi@kernel.org, joey.gouly@arm.com, yuzenghui@huawei.com
Subject: Re: [PATCH v14 7/8] KVM: arm64: use CASLT instruction for swapping guest descriptor
Date: Thu, 26 Feb 2026 13:53:49 +0000 [thread overview]
Message-ID: <aaBQbXnwKkAbIcAt@e129823.arm.com> (raw)
In-Reply-To: <afa3974d-0dc1-4472-ad3d-dbfa078bc9ed@arm.com>
Hi Suzuki,
> On 25/02/2026 18:27, Yeoreum Yun wrote:
> > Use the CASLT instruction to swap the guest descriptor when FEAT_LSUI
> > is enabled, avoiding the need to clear the PAN bit.
> >
> > Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
> > ---
> > arch/arm64/include/asm/cpucaps.h | 2 ++
> > arch/arm64/include/asm/futex.h | 17 +----------------
> > arch/arm64/include/asm/lsui.h | 27 +++++++++++++++++++++++++++
> > arch/arm64/kvm/at.c | 30 +++++++++++++++++++++++++++++-
> > 4 files changed, 59 insertions(+), 17 deletions(-)
> > create mode 100644 arch/arm64/include/asm/lsui.h
> >
> > diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
> > index 177c691914f8..6e3da333442e 100644
> > --- a/arch/arm64/include/asm/cpucaps.h
> > +++ b/arch/arm64/include/asm/cpucaps.h
> > @@ -71,6 +71,8 @@ cpucap_is_possible(const unsigned int cap)
> > return true;
> > case ARM64_HAS_PMUV3:
> > return IS_ENABLED(CONFIG_HW_PERF_EVENTS);
> > + case ARM64_HAS_LSUI:
> > + return IS_ENABLED(CONFIG_ARM64_LSUI);
> > }
> > return true;
> > diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h
> > index b579e9d0964d..6779c4ad927f 100644
> > --- a/arch/arm64/include/asm/futex.h
> > +++ b/arch/arm64/include/asm/futex.h
> > @@ -7,11 +7,9 @@
> > #include <linux/futex.h>
> > #include <linux/uaccess.h>
> > -#include <linux/stringify.h>
> > -#include <asm/alternative.h>
> > -#include <asm/alternative-macros.h>
> > #include <asm/errno.h>
> > +#include <asm/lsui.h>
> > #define FUTEX_MAX_LOOPS 128 /* What's the largest number you can think of? */
> > @@ -91,8 +89,6 @@ __llsc_futex_cmpxchg(u32 __user *uaddr, u32 oldval, u32 newval, u32 *oval)
> > #ifdef CONFIG_ARM64_LSUI
> > -#define __LSUI_PREAMBLE ".arch_extension lsui\n"
> > -
> > #define LSUI_FUTEX_ATOMIC_OP(op, asm_op) \
> > static __always_inline int \
> > __lsui_futex_atomic_##op(int oparg, u32 __user *uaddr, int *oval) \
> > @@ -235,17 +231,6 @@ __lsui_futex_cmpxchg(u32 __user *uaddr, u32 oldval, u32 newval, u32 *oval)
> > {
> > return __lsui_cmpxchg32(uaddr, oldval, newval, oval);
> > }
> > -
> > -#define __lsui_llsc_body(op, ...) \
> > -({ \
> > - alternative_has_cap_unlikely(ARM64_HAS_LSUI) ? \
> > - __lsui_##op(__VA_ARGS__) : __llsc_##op(__VA_ARGS__); \
> > -})
> > -
> > -#else /* CONFIG_ARM64_LSUI */
> > -
> > -#define __lsui_llsc_body(op, ...) __llsc_##op(__VA_ARGS__)
> > -
> > #endif /* CONFIG_ARM64_LSUI */
> > diff --git a/arch/arm64/include/asm/lsui.h b/arch/arm64/include/asm/lsui.h
> > new file mode 100644
> > index 000000000000..8f0d81953eb6
> > --- /dev/null
> > +++ b/arch/arm64/include/asm/lsui.h
> > @@ -0,0 +1,27 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +#ifndef __ASM_LSUI_H
> > +#define __ASM_LSUI_H
> > +
> > +#include <linux/compiler_types.h>
> > +#include <linux/stringify.h>
> > +#include <asm/alternative.h>
> > +#include <asm/alternative-macros.h>
> > +#include <asm/cpucaps.h>
> > +
> > +#define __LSUI_PREAMBLE ".arch_extension lsui\n"
> > +
> > +#ifdef CONFIG_ARM64_LSUI
> > +
> > +#define __lsui_llsc_body(op, ...) \
> > +({ \
> > + alternative_has_cap_unlikely(ARM64_HAS_LSUI) ? \
> > + __lsui_##op(__VA_ARGS__) : __llsc_##op(__VA_ARGS__); \
> > +})
> > +
> > +#else /* CONFIG_ARM64_LSUI */
> > +
> > +#define __lsui_llsc_body(op, ...) __llsc_##op(__VA_ARGS__)
> > +
> > +#endif /* CONFIG_ARM64_LSUI */
> > +
> > +#endif /* __ASM_LSUI_H */
> > diff --git a/arch/arm64/kvm/at.c b/arch/arm64/kvm/at.c
> > index 885bd5bb2f41..fd3c5749e853 100644
> > --- a/arch/arm64/kvm/at.c
> > +++ b/arch/arm64/kvm/at.c
> > @@ -9,6 +9,7 @@
> > #include <asm/esr.h>
> > #include <asm/kvm_hyp.h>
> > #include <asm/kvm_mmu.h>
> > +#include <asm/lsui.h>
> > static void fail_s1_walk(struct s1_walk_result *wr, u8 fst, bool s1ptw)
> > {
> > @@ -1704,6 +1705,31 @@ int __kvm_find_s1_desc_level(struct kvm_vcpu *vcpu, u64 va, u64 ipa, int *level)
> > }
> > }
> > +static int __lsui_swap_desc(u64 __user *ptep, u64 old, u64 new)
> > +{
> > + u64 tmp = old;
> > + int ret = 0;
> > +
> > + uaccess_ttbr0_enable();
> > +
> > + asm volatile(__LSUI_PREAMBLE
> > + "1: caslt %[old], %[new], %[addr]\n"
> > + "2:\n"
> > + _ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w[ret])
> > + : [old] "+r" (old), [addr] "+Q" (*ptep), [ret] "+r" (ret)
> > + : [new] "r" (new)
> > + : "memory");
> > +
> > + uaccess_ttbr0_disable();
> > +
> > + if (ret)
> > + return ret;
> > + if (tmp != old)
> > + return -EAGAIN;
> > +
> > + return ret;
> > +}
> > +
> > static int __lse_swap_desc(u64 __user *ptep, u64 old, u64 new)
> > {
> > u64 tmp = old;
> > @@ -1779,7 +1805,9 @@ int __kvm_at_swap_desc(struct kvm *kvm, gpa_t ipa, u64 old, u64 new)
> > return -EPERM;
> > ptep = (u64 __user *)hva + offset;
> > - if (cpus_have_final_cap(ARM64_HAS_LSE_ATOMICS))
> > + if (cpucap_is_possible(ARM64_HAS_LSUI) && cpus_have_final_cap(ARM64_HAS_LSUI))
>
> minor nit:
>
> You don't need the cpucap_is_possible() as it is already checked via
> cpus_have_final_cap()->alternative_has_cap_unlikely()
Right. It seems a little bit of redundant.
I'll remove it.
Thanks!
--
Sincerely,
Yeoreum Yun
next prev parent reply other threads:[~2026-02-26 13:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 18:27 [PATCH v14 0/8] support FEAT_LSUI Yeoreum Yun
2026-02-25 18:27 ` [PATCH v14 1/8] arm64: cpufeature: add FEAT_LSUI Yeoreum Yun
2026-02-25 18:27 ` [PATCH v14 2/8] KVM: arm64: expose FEAT_LSUI to guest Yeoreum Yun
2026-02-25 18:27 ` [PATCH v14 3/8] KVM: arm64: kselftest: set_id_regs: add test for FEAT_LSUI Yeoreum Yun
2026-02-25 18:27 ` [PATCH v14 4/8] arm64: futex: refactor futex atomic operation Yeoreum Yun
2026-02-25 18:27 ` [PATCH v14 5/8] arm64: futex: support futex with FEAT_LSUI Yeoreum Yun
2026-02-25 18:27 ` [PATCH v14 6/8] arm64: armv8_deprecated: disable swp emulation when FEAT_LSUI present Yeoreum Yun
2026-02-25 18:27 ` [PATCH v14 7/8] KVM: arm64: use CASLT instruction for swapping guest descriptor Yeoreum Yun
2026-02-26 11:16 ` Marc Zyngier
2026-02-26 14:05 ` Yeoreum Yun
2026-02-26 14:52 ` Suzuki K Poulose
2026-02-27 8:31 ` Yeoreum Yun
2026-02-26 11:28 ` Suzuki K Poulose
2026-02-26 13:53 ` Yeoreum Yun [this message]
2026-02-26 11:38 ` Oliver Upton
2026-02-26 13:52 ` Yeoreum Yun
2026-02-25 18:27 ` [PATCH v14 8/8] arm64: Kconfig: add support for LSUI Yeoreum Yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aaBQbXnwKkAbIcAt@e129823.arm.com \
--to=yeoreum.yun@arm.com \
--cc=ardb@kernel.org \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=joey.gouly@arm.com \
--cc=kevin.brodsky@arm.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=maz@kernel.org \
--cc=miko.lenczewski@arm.com \
--cc=oupton@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox